Video

Great video, thank you. I just shook hands on a 2019 limited, very low mile Tundra, I've built an 80 series Land Cruiser from scratch. We currently use a 2007 Tundra to tow we've had for years, but cross country and longer trips. The 2007 4.7 struggles I was blown away. Toyota did not have a transmission cooler on the 2019 to 2021 Tundra.

NitroZ18 Fishing, Hey, I don't see Toyota or aftermarket part numbers for these items your installing. Could you direct me to this information please? 1) Panel and Handle are 1 kit? 2) Extruded "U" nut n Bolt (did you purchased them at an auto parts store?) Great video and information, I'm going to look into this being I hate not having one on my drivers side 2020 - 1794.

Good morning, thank you for the video, finally I know that it is ultimately possible to drill the rivet holes, I was on the verge of giving up after trying for hours and going through a dozen of 1/8 and 3/16 drill bits. I am having the same issue drilling the roof pillars of my 3rd Gen Tundra to install my Uptop Roof rack. I will be using your method stepping up 5 different sizes of drill bits, my question, did you use cobalt or carbide drill bits? You mentioned you broke one of your drill bits and it was a nightmare to take it out, I can only imagine, was it because of too much downward pressure? All online recommendations to drill through hardened steel is slow speed and extreme downward pressure. Thanks again, your videos have been life savers, all of them!!!

No source to mine and active target is not working. Fresh battery updated both head units downloaded active target, software and installed. Still no source any help?

thanks for the video, i was just wondering how the latency was for the audio when watching videos if any?

I am not an engineer, if I buy something and it doesn't work, I am not going to start cutting and replacing parts to make it function how it should. It's getting returned. Good video however and nice troubleshooting.

Outstanding work sir....well done!

Hey I have quick question I don’t know if you can be able to help me I bought similar box before and couldn’t connect it to my hotspot I have 2016 cla250 and it doesn’t have touch screen I was using the little handle/mouse thing but no matter what I do I couldn’t get it working does this box come with remote control or is there anyway I can make it work with my car? Please let me know thanks

Great video. What holster did you get?

Hey man! I was wondering i just bought the same brake light off eBay and installed it but when i saw the same light on amazon and saw the reviews it mentioned water leakage into the head liner and I really don't want that to happen to my truck so if you could give a long term update id really appreciate it!

what's the cover plate in the rear of the center console??? want it badly

The ladder is actually not there for support.

Howdy You have 4 gauge from batteries to the block and perhaps 8 or 10 gauge from the block to your electronics. Does the block cause a power bottle neck? I hope that makes sense - I guess what I want to know is if you ran 8 gauge directly to the battery, you get 8 gauge power. But can the block cause you to have 10 gauge power even though you used 8 gauge wire? Thanks for your help! Mark

Awesome . I purchased the same one and I plan on installing it shortly. Thanks for the video.

Great video, excellent explanations, made it real easy to follow. Thanks

Does the OEM step touch the bumper like the aftermarket bed steps?

Спасибо старина, всё пояснил.

Just bought one today exited to see how it works out

Hook it up directly to the battery positive and will work either on or off

What year is your Tundra? This shit has totally different connections for my 21 tundra.

Good looking truck!

How do I hide the icons .. so I can have a Langer screen

How do I change headlight bulbs?

Great guide on installing AirBag cradles! We sent you an email,take a look.

Yup extractor spring. Great explanation. I made a similar video and did all these mods as well.

How come tundras don’t come with mounting screw hole on the roof?

Almost bought one yesterday had it in my hand then thought about the BS I went thought with the sfx I put it down. My sfx would fte 2 to 5 every mag . Canik sent me another recoil spring , no difference. Then I was told it has to use 124 grain bullets and finally after 500 rounds to just break it in it started working properly. I honestly love the gun now. But in the beginning I was making up curse words over this gun. I don’t need that in my life.

What tool did you use to trim the extractor spring? It is super small so I don’t want to mess it up

Do you still have to door grips available?

Link for the wiring kit??????

Don’t update your Toyota software because then the main Toyota sidebar never goes away and messes up your screen

awesome video. Thanks for adding the pictures of the exact harness that needs to be removed.

Im picking up our Z17 this week, it'll be the first upgrade...thx for the tip !

I just got an MC9 and took it out to the range last week. Multiple light strikes. 1-3 almost every other mag. Ran same ammo thru my Rival S and my instructor ran the ammo thru his Glock no issues. I bought to be my EDC. I have sent it back to Canik for warranty repair. Will have to make the other mods when I get it back. I will not EDC with it til it has no flaws. Picking up A Sig 365 XL as a second EDC. I really like the Caniks and love the way the MC9 shoots. I just need it to perform if it is going to be my EDC.

I just got the jb4 tune can i run the bluetooth and the obd 2 plug connected or it cant have both?? Thanks. Also after i download the stable and the basic firmware I can run either or

Where u got the wires from

I can't find any place on this site for me to order the door grips? Can you please share a link?

I did all the fixes excepts polish the breach face and it would always have a failure to return to full battery always on the first clip then it would shoot flawlessly the problem is that i want this as my edc why does it have to warm up to shoot failure free? Can anyone help me?

What side steps do you have?

So I just installed the AFE charge pipes thanks to your video. But I have a question. Did you find oil when you took off the OEM charge pipes? Also when transferring over the bypass valves did the spring come off is that normal? Thank you

I like the regular version stops door dings in their tracks

I am just learning things about ethernet and NMEA and need to learn fast since I am re-doing my boat GPS system. I luv your explanation and comprehensive enough. But I do have a question: when you connect the backbone to the power source via switch, will the unit like your Lowrance GPS will have power too since the backbone is connected to the Lowrance GPS. The Lowrance GPS has its own power port for connection to a power source. Is there a need to connect the Lowrance or Garmin GPS directly to a power source? Or you just abandon the power port connection of the GPS since it will be powered from the backbone connection.

Thank you for your detailed video...im in the process of changing hvac box and i have to go to the fire wall....such a great video

Would the alternator not charge the starting battery anyway without the charge? Unless you have to disconnect it somehow for that thing. Just a thought. Also, If you did one or two 36v batteries instead of three 12v, you could have had all your batteries connected. A 50ah 36v would be about the same as those three 12v. Heck I’d do a 100, or a couple 50’s.

Where can we get the door grips? Thanks

Canik should recall this gun

Need your help please,I have 2022 Tundra TRD OFF ROAD need to know what box you recommend I can use on my Tundra,and another question can I watch CZcams on and I have to use WiFi on my way out of town or make my cellular phone in a hotspot? I am from Puerto Rico I really appreciate your assistance or help ones again thanks

Will a factory reset, reset settings made with this module?

Have the same truck 2024, just got the Tbox. I haven’t been able to get it to full screen to hide the standard Toyota sidebar on the left hand side. Any suggestions?

Thank you for your review!! What an awesome looking setup, your truck, the rack, the tent, well done!! Question for you because I am having a hard time deciding on this....The rack system vs going to a shell? Did you give any consideration to a shell and if so, what was the clincher for the rack? I am definitely getting this exact Ikamper tent, just torn on the rack vs shell system. Thanks for any thoughts on that.