Video

So you didn't change the timing belt or the valley pan gasket. How old is the timing belt? Or how many miles? If you're planning on changing the timing belt on these, it's probably the easiest V6 timing belt job there is. You literally don't need any special tools. Just pull the crankshaft pulley off instead of taking off the crankshaft pulley bolt. Just be careful not to strip out the hex bolts.You don't even need cam holding tools as long as you mark the position and don't move them. Be sure to slap in a new Audi thermostat and belt tensioner and pulley, and do a quick pressure test to make sure the heater hoses under the cowl aren't leaking. Probably the previous owner saw some coolant needing replacing and decided it was the head gasket without doing any actual tests.

I'm confused why you would pull the engine without checking the valley pan gasket. 99% of the time that's where oil leaks are coming from. I'd recommend getting on the Quattro World forums so you don't have to do so much extra work.

The wood is real. The rear antenna is the radio antenna and telephone antenna, not just telephone antenna. Why would you call it a German piece of junk when it has 330,000 miles (Most likely on the original engine and transmission), and is in great shape and is only $600?

Hey bud, great video! looking for a model number for the RC control arms you put on?? What size lift do you have?

Soft toppers ?

Think the same happened with my 1895 45-70,,,,,,,thanks for the discovery……

Mine has no buttons on the dash to push

Hell yeah man. My 2019 l5p is lowered 2 inches with 22x12s. Been nervous as all hell to do a norcal myself, but you convinced me! Badass video man. Thank you.

Mine tends to fall out or become loose when I am shooting, fits snug but the kickback from the Glock g43x tends to make it wiggle out or become loose a little bit Any tips on how to make it stay better ?

I use a boat hook instead of a broom :)

All owners with this error need to file a complaint against Chevy for the MANUFACTURERS DEFECT because the defective coolant reservoir tank causes this issue by not permitting the top of the tank to flow down to the bottom of the tank where the sensor is.

“Plastic stackable bin” at Lowe’s for $20 each. 2 of them will EXACTLY fit across the back of the bed by the tailgate. Just hook’em together and to the walls…put all your groceries/stuff securely in them. I love mine! You’re welcome!

Terrible camera angle. You can't see what he does. Did he even watch this before he posted it? All you see is his hand.

Home Depot sells plastic trays. Talk in the back , short in the front. About 4 yrs ago $15. Two fit almost perfectly in my 2020 F150. I use a cargo ratchet bar to hold them in place.

Impressive tear down! I still have my 1995 a6 still driving. Family car bought locally in 97. I love this car!

Good review. Thanks for posting. Did you ever wear the boots during 100 F+ weather? If yes, did your feet overheat?

Thx for not using power tools, need to go replace my sons control arm out in the sticks and I’m an old school air tool guy. Hand tools only, looks like np, hopefully anyway🤣

You find a def fluid relocation let me know. Nobody makes them

Audi never build better cars between the late 80`s and mid90`s. I had a Audi 80 and a 100 during that time. Never had such good and solid cars ever since. The rust prevention is the best, even 25, 30 years or oder older cars are usually almost rostfree if they have been treaten with a minimum of care.

The wiring harness that you used to tap into the tail lights, (not the trailer connection) was that provided with the bar or did you purchase separately?

I replaced the cap clamp bolts with eyebolts They came in handy more than once

Just came across this post and you have a great truck. I will always have an eight foot bed on my truck. One way to beef up a net is to lace some 3 strand line through it to take up the stretch, do it horizontal and vertical if necessary. An extendable boat hook is also handy for retrieving items in the bed. I remember when trucks came standard with eight foot beds, boy time is flying. Good post.Thanks!👍⚡️

Thank you so much!!!! Worked like a charm!!!!

Thanks for telling me how you got it out.... not....

она вся в жиру! кватро, акпп , климат, люк, ещё и 7местная! у меня А6С4 2.8 авант кватро с механикой и климатом

For what the trucks cost should already have imo 😂😂😂

You need a flash light your gun isn’t a flash light

Great job……

Shoulda got the black one

good job, you repalced very high quality american made aprts with bottom of the barrel chinese trash

I've had the dreaded "COOLANT LEVEL LOW" message intermittently despite having full coolant. The sensor is molded into the tank so the whole tank must be replaced. Dorman 603-009 Engine Coolant Reservoir amzn.to/4aWvGP8 GM Compatible Orange Coolant amzn.to/4bgp0v4 Battery Terminal Brush amzn.to/3WmxEUv Autel Maxisys Scanners amzn.to/3UkzToK *As an Amazon Associate I earn from qualifying purchases.*

I just used the trusty 2X6 across the back. It was on hand. I added a couple of D rings to it for tie down.

Broom is an old item, many use a broom.

Hey great video. How about a update. Did they hold up

Hi there, thank for your video, I have 2006 Cadillac DTS, One sensor left front bad, I bought new one from Autozone, some how they didn’t work, do I have to buy from dealer? Please let me know, thank you

Is anti cease on threads ok?

When installed and rolling on dirt road, do they protect the paint well? 4:53

I want to get my center console out of my 2021 rebel 1500 and replace it with a jump seat as well is does this video apply.for those models

I programmed two more of mine over a year ago and it works fine, then put it away, today I tried them, none of them work? I dropped the original one and lost the battery, so I took the battery off the one I programmed a year ago to my old remote just to lock my vehicle. So why did the memory program one forget its memory?

Am I tripping or were your tie rod ends installed upside down on the knuckle ??

That's one of my favorite dashes of any car.

I bought a 95 for $100 finishing touches are tires and struts all the way around and seal the top. 123k miles runs and drives.

Did you bake it like the instructions call for?

Fronts need triangular shaped extensions to atrach to doors. Will show in next few days when i make it.

Thank you sir! I am trying this to reprogram the new fobs.

i have the same car for over 3 years now it was pain in the a at first i had a problem with the cylinder block that was cracked mixing water and oil it was hard fixing it but now its perfect oww btw u always have to bleed out air when adding new coolant

Hi, how was it towing without side windows on the topper, visibility wise?

Grandpa beard guy says, Grandpa Topper hahahahaha

You didnt have to use the sleeves that comes with those RC a-arms?

Ordered the tool from the link you listed and I still can’t get the tires to relearn, figured I’d try the tool because the air out method wasn’t working no horn honk on any tire I’ve tried moving it around the tire like you mentioned but still nothing. Any suggestions?