Video

Thanks so much! I'm hoping to plan another trip to explore even more. Stay tuned!

These are 20" 400-grain arrows, with 125-grain Slick Trick crossbow broadheads. Centerpoint 20" 400 grain crossbow bolts → amzn.to/3fAJIOz Slick Trick 125 grain crossbow broadheads → amzn.to/3rmXXt7

Launched at Cove Harbor in Rockport!

Thanks

Thanks! It was certainly a cool experience!

Not sure what you're referring to here, but these things were anything but small.

Agree to disagree. Yes, we were on a property that was partially high-fenced, but it's a very large property, and animals were able to get out, so were not "closed in." This outfitter does most of the scouting with a vehicle, then we got out to stalk. We stalked about 500 yards on my dad's animal and set up to get the shot. For mine we assumed they would be coming across the road, so were able to set up there. Were we hiking miles into the backcountry to kill an elk? No, but it was certainly a challenging hunt in its own right.

Yes, it would have probably been good to have the alignment done with the new tires, just in case, but it has worked out well over the past 3 years - no unusual wear or drive. I've since went with a new set of tires in a different brand, and still no issues. I used the FORSCAN software to update my speedometer, and manually adjusted my headlights. I hope that helps!

I have the max tow package, and these fit just fine with the 2.5" level.

Yeah, there were quite a few rivers close to our route that we didn't hit. Some we planned for but simply didn't have time, others we just hadn't considered. Based on folks' suggestions in the comments, I'm planning at least one more, if not a few, trips to explore some of the rivers we didn't hit on this one. Thanks for following along!

Ha! Opinions are cool. Thanks for stopping by!

He clearly said it’s for towing purposes. Awesome comment though, dork

@@JM-mp4dm get bags like a normal person almost like it keeps the look and doesn’t make it squat pea brain

😆

It may work on other charcoal grills that have a tight-fitting lid. My dad has one of the cheap clamshell-style squarish grills, and it didn't work all that well, as there is too much space for air to escape. The Weber kettle's design is ideal for this type of cooking.

Thanks! Yes, installation is simple indeed. I'm still liking mine, and it's held up well over a few years.

Thanks! I leave my bottom vent about 1/4 way open, and only touch the top vent to adjust temperature through the cook.

It's an incredibly beautiful area up there. We enjoyed catching trout in the lake - until the snowstorm ran us off. I'm hoping to bring my family back up there to camp again. Thanks for stopping by!

Yes, I agree! Even those that have a source with springs are still relying on run-in from surrounding tributaries. Thanks for stopping by!

Absolutely! Lead-foot-itis is definitely the culprit. I'm still loving this truck. I've added larger tires and a bit of lift, and I'm getting better mileage now than when I first got it. I have learned what it likes in different situations, and have cut back on making it go vrooom! Thanks for stopping by!

Thanks! I've spent WAY too many hours tracing rivers on google - this trip was a long time coming. I'm already planning another to see how many more I can see. More google map searches. 😆

I wonder is if the wood you're using is too wet, and/or if the chunks are too large. Using a good charcoal, the base should be clean heat, and whatever wood you add would be the culprit. The only time I've had issues with a bitter flavor was using an offset smoker and using wood that wasn't seasoned enough. You may start there, and see if you get any improvement.

@@TheGoodeLifeOutdoors Thanks for your response. Cheers.

Thanks!

Thanks! $800 is not a bad price if it truly is barely used. I paid a bit less for mine, but it was older, and I probably still overpaid a bit due to its true condition. It still does what I need it to do, so I'm happy. Best of luck! They are a great fishing platform for shallow waters.

So I ended up “adopting” some boats from a friend that is no longer able to Kayak due to shoulder issues. I think the one I’m going to make my primary fishing boat is a Native Manta Ray 14’. Are those Larry chairs pretty universal? It looked like it just sits down in there and uses two straps to secure it? Also, I’m in Spring Branch, TX, west of Canyon Lake. Let’s fish!

@@wilkinsonfamily3342 Congrats on the new boats! The Native looks to be a good platform, though I notice it's designed for a on-deck seat pad. On my Diablo, there are slots molded into the deck specific to the shape of the bottom of the Larry chair. The legs of that chair run fore-to-aft, so unless that seat space of the Native is wide enough, you'd probably have to build some sort of riser for a chair like that to fit on. There are other raised kayak chairs with legs that run side-to-side, so those might be a better choice if you wanted a raised seat. Do keep in mind, the Native is fairly narrow, so it you do raise your center of gravity, it may get tippy. I love Canyon Lake! I have some property near there where we hunt, and I've brought my kayak up there to get on the water during the heat of the day. I've caught some nice bass out of there. Is the water level coming up now that we've got some rain?

Yeah, but that's pretty typical with guided hunts. I'm still pretty bummed about it, but have another hunt planned for the fall and hope to get redemption.

Nope, I don't use backing on my inshore reels - just braid straight on the spool. Not the main reason, but it does allow me to keep fishing if I happen to lose a chunk of line to a snag or large fish.

I've had this kettle for at least 10 years now, and yes, there is some corrosion in some parts of the grill where I typically have my fires - whether it's a snake, offset fire or similar. I recently sanded everything down and resprayed it will high-temp grill paint to get some more life out of it. Especially down here on the Texas coast, these grills have a lifespan - and the more you use them, the shorter that is. I've kept this one up as well as I can, and hope to get a few more years out of it, but know I will eventually have to replace it with another.

Oh wow, that's pretty cool! I am planning another river trip, and the Aransas is on my list. I didn't know about the Beeville wastewater connection - that could be an interesting tidbit! Thanks for letting me know!

@@TheGoodeLifeOutdoors absolutely. Highway 202 about 3 miles east of Beeville you will find a bridge over Poesta Creek (a tributary into the Aransas). There should be a small dirt road next to the bridge that allows access to the creek. Underneath, you’ll find clearish running water, huge carp, a decent photo spot for your next trip. I can attest this exists 20+ years ago. 😂

@@haroldbeauchamp3770 Excellent, thank you! I just looked on the satellite view and sure enough, looks like it's there. I'm not sure when I'll plan my next trip, but this is definitely on the list!

Thanks! And the results are tasty!

Yes, I keep my bottom vent constant about 1/4 open, and move the top vent only to control temperature. Thanks!

Muchas gracias. ¡Te agradezco que mires!

Yes, I completely agree that a professionally-applied product is the way to go on this. I'm curious about your Herculiner deteriorating, as I have not had similar results. Mine is holding up well after over 3 years, and I abuse the heck out of it. It has worn through where I drag my kayak in and out, but for the most part, it's still adhered well (except for a few thin places).

@@TheGoodeLifeOutdoorsPrior to application, I prepped the surfices correctly as instructed and took my time, this was process was not rushed in any way nor did I cut any corners. I applied three coats, and was initially satisfied. However, after three months it began to fade completely and the thickness has deteriorated. I live in SoCal so no harsh environment was to blame. I'm not sure what caused this to happen other than the product being faulted.

@@apolloplanb5209 Yeah, that all sounds like the right process. I wonder if you got a bad batch?

Awesome! I love mine, too!

I agree on the plastic bedliners. I've found the Herculiner has hardened up over time, so while it's not the toughest liner out there, it does allow for heavy material movement without catching. That said, at the edge of the bed at the tailgate, the constant dragging of my kayak out and in has completely worn through the liner and the paint - here is where I'm thankful for the aluminum body on the F150 as there is no corrosion in that spot.

Blue for sure. Is it necessary? Probably better than finding out otherwise. 😆

@@TheGoodeLifeOutdoors the instructions don’t say to use thread locker that’s why I ask. And you’re supposed to check the torque at 100 miles and 500 and 1000 so wouldn’t your think it’s pointless since it’s gonna break the bond? Probably will take the tires off this weekend and add some of my orange thread locker (stronger then blue but removable) just to be safe

Heck yeah! Thanks for stopping by!

Thanks for following along! Sounds like you had a great trip on the Red! Palo Duro is definitely a cool spot, and I'm looking forward to getting back.

Awesome! I'm now just under 120k with this one, and it's done great!

Ha! Thanks for watching!

Yes, we had less than 1/10" of rain, and no issues with services - Beryl pretty much missed us. I'm glad y'all are ok!

Thank you!

I understand they're reasoning. Many folks may not use this option, so the holes can stay protected by the paint. It's easy enough to drive them in there if you need them.

Thank you! Reach out to my email - goodelifeoutdoors@gmail.com

Thanks, Carl!

Thank you!!

It’s got 2 sets of Chevy keys that I gifted it 💔

Awesome! Glad you enjoy it there! Thanks for following along.

Ha! Oops!

The short answer is time. We mapped out what we could visit in the time we had, knowing we wanted to get up to the Rio Grande in Colorado. Another trip is definitely in the works, and the Trinity and Sabine are high on the list. I've even been made aware of some rivers from folks comments that I wasn't previously aware of, so that gives me even more options. Stay tuned, and thanks for following along!

I definitely understand. I will say, there are exceptionally well-made and still look amazing on my truck.

I believe these are from a 2019-2020 Raptor, so should fit your situation as well as mine with the same set up. I've enjoyed the heck out of mine!

I am in the process of planning another trip to explore more of our rivers, and the Sabine, Trinity, Sulphur, and San Antonio are all on the list! Stay tuned...

Yes, I agree that now, 3 years after I posted this video, the prices for trucks has skyrocketed. In early 2021, 55k was completely doable for this model and features, but that very soon became unrealistic. Thanks for following along!

It was definitely more of a sea rise that we were expecting. I'm hoping all the businesses affected come through ok with their insurance.