![Jim Haslett](/img/default-banner.jpg)
- 76
- 607 462
Jim Haslett
Registrace 3. 03. 2010
DIY EQ Wedge for Barn Door Tracker
I make a simple, DIY Equatorial (EQ) wedge for my motor driven barn door tracker. This EQ wedge allows me to set the proper altitude angle for polar aligning my barn door tracker.
zhlédnutí: 801
Video
Making a Sign From My Logo
zhlédnutí 193Před 7 lety
In this video, I make a backlit sign out of my custom logo.
Monarch Butterfly Emerging from Chrysalis
zhlédnutí 297Před 7 lety
July 4th, 2017 Monarch Butterfly emerging from it's chrysalis.
Michigan State Parks on the Air, Belle Isle Activation
zhlédnutí 529Před 7 lety
On May 27th, 2017 we activated the Belle Isle State Park for the Michigan State Parks on the Air (MSPOTA) event. We had a great time in the park, and wonderful weather, even if we only made 11 contacts. Here are a few that we recorded...
Receiving NOAA Weather Satellites with an SDR and a Rasperry Pi
zhlédnutí 82KPřed 7 lety
This is a build I did on a Raspberry Pi to receive NOAA weather satellite signals and process them into images on a Raspberry Pi 3 Model B. The satellite reception is done with a NooElec SDR dongle and a QFH antenna. You can see my build of the QFH atenna in the video linked below. All of the SDR reception and image processing is done on the Raspberry Pi, and it is completely automated. Once it...
VW Jetta MK5 Cell Phone Holder Hack
zhlédnutí 7KPřed 7 lety
In this video, I adapt a CD slot cell phone holder to be a permanent mount cell phone holder for my 2008 Jetta (MK5). Thanks to Enfig Car Stereo (czcams.com/users/Enfig) for the great service and instructional videos that made this possible.
Hustler Vertical Antenna Site Prep
zhlédnutí 13KPřed 7 lety
In this video, I prepare the installation site for my Hustler 4BTV vertical antenna. I build a fence and bury coax to protected things from my curious dog.
Hustler 4BTV Antenna Assembly and Installation
zhlédnutí 31KPřed 7 lety
In this video, I assemble and install my Hustler 4BTV vertical antenna. I also add a DX Engineering SO-239 add-on kit (well worth the extra investment).
Building an Air Choke or "Ugly Balun"
zhlédnutí 61KPřed 7 lety
In this video, I build an Air Choke, or "Ugly Balun" for my Ham Radio antenna.
Lathe Camera Mount
zhlédnutí 230Před 7 lety
In this video, I make a camera mount for recording video while using my lathe. This mount is flexible, in that I can move the camera right to left along the length of the lathe bed.
Finishing up the Garden Fence
zhlédnutí 25KPřed 8 lety
Today, I finish installing a decorative metal fence around the Butterfly Garden.
Jojo and Chloe meet for the first time
zhlédnutí 312Před 8 lety
Jojo and Chloe meet for the firs time on Sunday. They have a great time playing together!
Hustler 4BTV Antenna Unboxing
zhlédnutí 3,4KPřed 8 lety
It's been a long time coming, but I finally got my new Hustler 4BTV antenna! I can't wait to get it installed, hopefully I'll have time this weekend.
Shop Tour - 200 subscribers
zhlédnutí 123Před 8 lety
I may not be a "big time CZcamsr", but I do appreciate the subscribers I do have. This is a little "thank you" video to all of you who follow along with what I do. Thank you for subscribing.
Field Day 2016 - Hazel Park Amateur Radio Club
zhlédnutí 4,3KPřed 8 lety
Field Day 2016 - Hazel Park Amateur Radio Club
Building a 3 Foot Tall Wooden Nutcracker Hearth Decoration - #9 (Final)
zhlédnutí 10KPřed 8 lety
Building a 3 Foot Tall Wooden Nutcracker Hearth Decoration - #9 (Final)
Building a 3 Foot Tall Wooden Nutcracker Hearth Decoration - #8
zhlédnutí 3,3KPřed 8 lety
Building a 3 Foot Tall Wooden Nutcracker Hearth Decoration - #8
Building a 3 Foot Tall Wooden Nutcracker Hearth Decoration - #7
zhlédnutí 2KPřed 8 lety
Building a 3 Foot Tall Wooden Nutcracker Hearth Decoration - #7
QFH Antenna Results - NOAA 19 satellite reception with SDR
zhlédnutí 11KPřed 8 lety
QFH Antenna Results - NOAA 19 satellite reception with SDR
Building a quadrifilar helix antenna (QFH) for NOAA satellite reception with an RTL-SDR
zhlédnutí 67KPřed 8 lety
Building a quadrifilar helix antenna (QFH) for NOAA satellite reception with an RTL-SDR
Aircraft Tracking via ADS-B with NooElec RTL-SDR
zhlédnutí 79KPřed 8 lety
Aircraft Tracking via ADS-B with NooElec RTL-SDR
Lopez Kenneth Miller Jessica Rodriguez Jeffrey
Moore Dorothy Perez Thomas Walker Larry
Miller Robert Thompson Barbara Lee Kimberly
Hall Kenneth Moore Jeffrey White Sharon
Martinez Ruth Jones Scott Walker Linda
Hernandez Sarah Lopez Barbara Martin Sarah
is a pitty that your explenation is pretty good but the pace is too quick and the worst is that the way you present it is olmost unreadible on a laptop screen.. but thanks for your nice try..
Great Job, I am getting the 6 BTV next month and I am wondering how to prepare the hole? How deep and what circumference diameter to fill with cement and what type of mast in length and diameter to fix in the ground and size to remain out for holding the 6BTV? Can you help please?
Hi Will this work on a pi5 with 64bit OS?
Hi Jim, loe your video. just like one other comment on your video, my panels did not include the anchors .... did anyone ever fnd out where to purchase these anchors? thanks, Ed
Thanks for sharing
The left hans display is different from yours and I can't find the dongle
How did you calculate the number of coils?
Hi would u happen to have the nutcracker soldier meserments I know its been 7year sins you posted this but just thought I'd ask
Good video. Minor twist. When at the box store getting the 4" PVC. Look for 4" drain pipe. Same as above but it has 3/4 holes every 6" and a PL-259 just fits nicely thru them leaving the tails in the center
One of those d'oh moments we've all had.
I salvaged a DX-Engineering Predator 6BTV. It was boxed and discarded. It is missing the third trap and the fourth trap can not be installed without the second trap's tube. Thus, I just assembled it with traps 1,2,5,6. It is great for receiving. An operator left a Yaesu FT-710aess in my repair bin back in March 2023. He has not contacted me, nor can I contact him through his telephone, cellular phone, nor email. It has been in the repair bin, with nothing wrong with it, since March. I am tempted to connect it to the broken predator antenna. What wonders could I receive? What secrets will I hear in the airwaves? Surely, connecting the Yaesu FT-710 will cause no harm to the radio. It does not seem as if the operator will be returning. I do not have any contract clause stating that abandoned equipment will be mine after any certain time. Thus, the radio is not mine, and possibly will never be mine. But, it really seams abandoned. I did not even find anything wrong with it. The problem must have been the antenna or power supply. The broken Predator 6BTV has already been installed. Just two tiny connections, and I could receive the world. I can not transmit anyway.
Thank you Jim.
The Raspberry Pi is another thing that's so expensive today. I'm glad I purchased several pre Covid I have 5 RPI 3s and 6 RPI 4s (4Gig) I'm not selling any of them , I can always use the money and sell them for 4-5 times what I pay for them but they are way too useful to me . And I'm not the kind of person to price gouge people anyway. It's sad what the sellers are doing out there today. 😢
The music sounds like it should be part of a Quentin Tarantino movie 😊
Just watched this video in 2023 the price of that wire is soooo much more expensive now😮 I made one of there antennas a while ago but it got ruined in a move. I'm going to use some scrap 10/2 Romex (stripped to make the next one.
Worst part is Nooelec's instructions are incredibly bad at explaining the actual drivers.
i'm doing well if I can keep my PVC builds to within a 1/16", or approximately 1.5 mm. Measure things as accurately as possible, but temper your expectations accordingly. Don't sweat a milimeter or two.
Thanks for the Video. But the first link does not work. Also "RTL 1090"
Thanks for the video! I can attest to the great performance of these Hustler Antennas. I had a 5BTV (80 thru 10 meters) with 8 radials on the roof of my 2-story house for many years. I could work anything station I could hear -- all over the world. It stood tall, straight, and proud through many wind storms with just 4 guy wires. I recently needed to get a new shingle roof and took the 5BTV down. I'm replacing it with a brand new one in its place and giving the old one to my son who is also a radio amateur. Long live these great vertical antennas.
Hi, I like your video, straight in & straight to the point, no preamble or waffle! Could you tell me what inductance the coil was and what band was it for? I’m looking to build one from RG58 for 160 m band. God bless, Bill G6ATO
thanks informative the 137mm wish you mentioned the gap {6mm?} betwix the elements....
Hi thanks grate job the way you explain it was very easy thanks but i have one question for you every thing is working great but i can not see the aircraft picture that is selected can you please with that pat of the setup thanks
ok so question.... i just did the same thing and was told 17 turns of rg8x.... I did that and it completely screwed up the 40m band. how many turns did you end up and how do you test it (put a dummy load on one end and put an analyser on the other and it was 1.2:1 1.8-50mhz)
dank voor je uitleg, dit heeft mij in ieder geval op weg geholpen. '73 Henk
HI my name is mark and i was trying every thing that you say to do but i cant get it to connect it just would not connet can you pleas tell me what else can i do PLEASE I NEED YOUR HELP THANKS
me gusto mucho lo voy hacer.
Hello I’m in the UK. What make of fencing and design is it please? Thank you 😊
The make is panacea Can get it in band q
some of the links give me errors on install
Would love to know details of fence manufacturer and where purchased...
Cool
Hi Jim I have the 4-BTV Multiband HF Vertical Antenna. I have it mounted to the side of my upstairs porch where there are no trees. I just ordered the DX Engineering DXE-AOK-DCF - DX Engineering Direct Coax Feed Add-On Kit shown in your video. I have the DX Engineering DXE-RADP-3 - DX Engineering Radial Plate but I don't know if I need it. I am not using a mounting pipe I attached the antenna base to a 4x4 on the porch. I have 4 brass 8n ft grounding rods. Can I run a line off the antenna base to the ground rods or do I need to run my coax down to the RADP? Any help would be great I have some photos of the connection to the wood. Where do I attach the ground at the antenna base since I am not using the RADP. The antenna booklet indicates I may not need radials. Thank you! Best wishes ~ Forrest
Great video you work really fast! Thanks for speeding up things, its easier to watch.
how did it work?
It worked exceptionally well, until it took a tumble down a flight of stairs, and smashed into it's component parts.
With a work table like that I would loose all my screws in between the boards.
You and me both! I’m just too lazy to actually fix it.
It basically like a sky track?
Can i get P25 or NXDN?
Why do you use rg 58
Did everything in this video come with the antenna ?
Thanks, this helped me get going with SDR Sharp. Couldn't get it to work with the device. It's working now thanks to you.
Hello , I have loaded my Raspberry with all the data you provide on your site to download images from weather satellites. In principle I think it works but I have a doubt and I will appreciate if you can help me. I uploaded everything to the Raspberry using a wifi connection with Putty and since my knowledge of Linux and Rasp is very low, I would like to know if the system is still working when I disconnect from Putty. And I would also like to know if when I turn Rasp off and on again, the system boots by itself or what instruction I should place. Thank you very much for all the help you can give me. Kind regards Albert Chubut Patagonia Argentina
The project still works?
Hello , I have loaded my Raspberry with all the data you provide on your site to download images from weather satellites. In principle I think it works but I have a doubt and I will appreciate if you can help me. I uploaded everything to the Raspberry using a wifi connection with Putty and since my knowledge of Linux and Rasp is very low, I would like to know if the system is still working when I disconnect from Putty. And I would also like to know if when I turn Rasp off and on again, the system boots by itself or what instruction I should place. Thank you very much for all the help you can give me. Kind regards Albert Chubut Patagonia Argentina
Thanks so much for a very informative and well structured video. I've been playing with cubesat and weather sat telemetry decoding - all with indoor antennas as no allowed anything outside my flat - and always wanted to have a go at ADS-B. This got me up and running very easily! Using Nooelec SMART IV and Windows 8.1. 70cm HB9CV for the antenna, until I make something more appropriate. 🙂
Yeah bro sorry about that I was watching him in all different order and I just watch 2 and you do have the measurements and stuff in there thank you very much and and it is very interesting and thank you for coming out with this have a nice day