- 24
- 272 554
David Wang
Registrace 8. 12. 2017
3D printer user
My music channel:
czcams.com/channels/5bvaEipMNvONeH1A2pFB5g.html
My music channel:
czcams.com/channels/5bvaEipMNvONeH1A2pFB5g.html
Rat Rig V-Cast Conversion Part 3 - The Electronics
This video is the part 3 of the conversion of Creality CR-10 V3 to Rat Rig V-Cast 1.5 6WD, which is a 100x time lapse of the electronics assembly process.
00:13 - Electronics Box Assembly
11:28 - Wire Loom Assembly
15:36 - Printer Wiring Assembly
20:02 - First Print
Link to STLs:
www.printables.com/model/714330-rat-rig-v-cast-15-idex-6wd
00:13 - Electronics Box Assembly
11:28 - Wire Loom Assembly
15:36 - Printer Wiring Assembly
20:02 - First Print
Link to STLs:
www.printables.com/model/714330-rat-rig-v-cast-15-idex-6wd
zhlédnutí: 804
Video
Rat Rig V-Cast Conversion Part 2 - The Build
zhlédnutí 872Před 8 měsíci
This video is the part 2 of the conversion of Creality CR-10 V3 to Rat Rig V-Cast 1.5 6WD, which is a time lapse of the build process, that does not include electronics.
Rat Rig V-Cast Conversion Part 1 - The Design
zhlédnutí 1,2KPřed 10 měsíci
This video is the part 1 of the conversion of Creality CR-10 V3 to Rat Rig V-Cast 1.5 6WD, which covers everything about my design.
Goodbye, Creality CR-10 V3.
zhlédnutí 1,1KPřed rokem
I disassembled my CR-10 V3, and I am planning to turn it into something better, something more powerful. The best of it is yet to come.
5:00 Shipwreck #speedboatrace on Rat Rig V-Core 3 500mm AWD
zhlédnutí 6KPřed rokem
I believe this is the fastest I can push on a V-Core 3 500mm. The motors are capable of more acceleration but the limit is capped when belt teeth starts skipping on the drive pulley. 00:00 - Specs 00:18 - Homing 00:32 - Z-Tilt Adjust 02:04 - Print Start MACHINE SPECS Printer: Rat Rig V-Core 3.1 Motherboard: BTT Octopus Pro F446 V1.0 X/Y Drivers: Mellow Fly TMC5160 Pro V1.2, 48V Extruder Driver:...
2022 Rewind: Rat Rig V-Core 3 500mm
zhlédnutí 51KPřed rokem
January - 00:06 February - 02:19 March - 05:20 April - 06:54 May - 08:54 June - 09:48 July - 09:49 August - 12:30 September - 15:10 October - 17:59 November - 20:41 December - 22:01
Nozzle Camera on Rat Rig V-Core 3.1 Printing a Calibration Cube
zhlédnutí 2,6KPřed rokem
Excuses the bad video quality, this is recorded with a endoscope camera, mounted in front of the nozzle, to give you an immersive experience with 3D printing.
ERCF Filament Swap Cycle on Rat Rig V-Core 3.1
zhlédnutí 6KPřed rokem
The Enraged Carrot Rabbit Feeder has finished its calibration, testing with filament change.
3D Printed Chair on a 900mm HevORT printer
zhlédnutí 11KPřed rokem
This printer, though large, was started by someone else a long time ago, the parts are a bit old and outdated, and the frame is a bit flimsy. Even though it does not offer the best performance, we managed to make it work, and print functional furniture. HARDWARE CONFIGURATION Material: Luminous PLA XY steppers: LDO 42STH48-2004AC Z steppers: Stepperonline 23HS30-2804S Board: BTT Octopus Pro XY ...
ERCF 9-Filament MMU Blurolls Kit Build
zhlédnutí 20KPřed rokem
Building the Enraged Carrot Rabbit Feeder 9-filament MMU kit from Blurolls, with custom Rat Rig logo parts. This is my second build of this kit. Do not sniff the LM8UU.
Rat Rig V-Core 3 500 printing 3.1 upgrade parts at high speed
zhlédnutí 15KPřed 2 lety
Rat Rig V-Core 3 500printing 3.1 upgrade parts Hotend: Trianglelab Rapido UHF Extruder: LDO Orbiter V1.5 Part fan: NMB 04028DA-12T-AK-H0 Filament: eSUN PETG solid red Nozzle temp: 245C Bed temp: 80C Fan speed: 15% Infill speed: 300mm/s Internal perimeter speed: 200mm/s External perimeter speed: 80mm/s Infill and internal perimeter accel: 35,000mm/s^2 External perimeter accel: 10,000mm/s^2
Rat Rig V-Core 3 1000mm/s at 30k
zhlédnutí 24KPřed 2 lety
Machine: Rat Rig V-Core 3 500mm³ (with CF gantry) Speed: 1000mm/s (100mm/s first layer) Acceleration: 30,000mm/s² (2000mm/s² first layer) Deceleration: 20,000mm/s² Nozzle temp: 270°C Bed temp: 60°C Extruder: LDO Orbiter V1.5 Hotend: Trianglelab Rapido UHF Motor: LDO-42STH48-2504AC at 54V Fan: NMB 40428DA-12T-AKH Filament: eSUN PLA Lime
Extreme Bridging on Rat Rig V-Core 3 500mm
zhlédnutí 24KPřed 2 lety
Testing bridging performance of the Rat Rig V-Core 3 500mm. Filament: eSUN PETG Red Nozzle temp: 250 Bed temp: 80 Extruder: LDO Orbiter 1.5 Hotend: Trianglelab Rapido UHF Hotend fan: Noctua A4x20 Part cooling fan: NMB 04028DA-12T-AKH Bed blaster fan (2x): Delta PFR0912XHE 00:20 - 10mm bridge 00:32 - 20mm bridge 00:49 - 30mm bridge 01:11 - 40mm bridge 01:39 - 50mm bridge 02:09 - 100mm bridge 02:...
9:08 #SpeedBoatRace on Rat Rig V-Core 3 500mm
zhlédnutí 11KPřed 2 lety
9:08 #SpeedBoatRace on Rat Rig V-Core 3 500mm
1500mm/s Speed Test on Rat Rig V-Core 3 500
zhlédnutí 23KPřed 2 lety
1500mm/s Speed Test on Rat Rig V-Core 3 500
Rat Rig V-Core 3 1000mm/s Z-Tilt Adjust
zhlédnutí 12KPřed 2 lety
Rat Rig V-Core 3 1000mm/s Z-Tilt Adjust
Happy Valentine's Day from a Rat Rig V-Core 3!
zhlédnutí 7KPřed 2 lety
Happy Valentine's Day from a Rat Rig V-Core 3!
Rat Rig V-Core 3 500 at 100,000 Accel & Decel
zhlédnutí 20KPřed 2 lety
Rat Rig V-Core 3 500 at 100,000 Accel & Decel
Rat Rig V-Core 3 500 15:20 #SpeedBoatRace
zhlédnutí 5KPřed 2 lety
Rat Rig V-Core 3 500 15:20 #SpeedBoatRace
Creality CR-10 V3 120mm Silent Noctua Fan Upgrade
zhlédnutí 5KPřed 2 lety
Creality CR-10 V3 120mm Silent Noctua Fan Upgrade
nice video ❤.. but how david ? hardware upgrades? what are the settings for acceleration speed ?
We have 3D printer at home Printer at home
Im looking at converting my sovol sv04 IDEX to a v-cast idex i just ordered a BIGTREETECH Octopus V1.1 as a controller board probably overkill but figured it will work
So seeing i still have a cr10v3 how would i go about getting mine to run this fast?
I did this to my cr10 v3, good work! It is finally silent!
can I have the G-code for the music at the beginning?
I'm torn on doing a vcore-4 upgrade or not, what are your thoughts?
At the current stage, I will start designing a 6WD V-Core 4, but I won't be buying the kit just yet
Love seeing you bring this to life! I'm sure you'll iron everything out in no time!
now go 48V
It is already 48V
how did u solve the racking after updating 3.1？
I drilled out metal joiner plates instead of printed ones
Hi, congratulations on the video, it would also be helpful on how to install it, however I'm also trying to build this 9 color one, the problem that stopped me for a moment was that I need to make a change to the extruder group where the hotend and I are having a Voron with the all metal group (aluminium) I don't know if it is possible to do without that modification or if there is any help on how to install it thanks
The installation instructions are in the ERCF Github, there is a ERCF manual PDF for installation instructions
@@davidwang_3d OK thank you
awesome video, and amazing printer...well done ! - cant wait to see it in action, got a multi tool printer planned aswell... although its voron 2.4 based since i really love that from my (not yet extremely) speedy voron 2.4 Because you said video editing to do a timelapse was intense - i dont know what software you use but since i do some videos myself (dont check em out they aint the best yet) i can recommend CapCut as a free software - its very easy, fun and quick to make things faster, silence the recording sound to avoid that constant whistle, add text and simple mostly copy right free background music - hope that helps (from an ever more tiny youtube mate xD)
Typo at 20:36 - I was meant to say the LDO Super Power motors (2804) have less torque than the Speedy Power motors (2504)
you’re doing an amazing job !
the day has finally come, the man that made me say "screw it, im buying a DIY printer" has posted again :D
Very cool work man! That’s some clean wiring. Don’t lose motivation!
I never lost motivation to work on my printers, it's only the video editing that hits hard on me
Fantastic Job ! Any news about your project and files on printable ?
www.printables.com/model/714330-rat-rig-v-cast-15-idex-6wd
@@davidwang_3d thank you.
Wow, that is a truely great video. Brilliant work !
Any chance of a complete list of control parts main board drivers etc
What couplers did you use for the stepper to drive gear?
Any coupler would do, just make sure it is rigid in the rotational direction
Very cool looking at building a 500 with these upgrades fast quite and quality thanks for sharing
Impressive work study
How in God’s name can you print TPU so fast?
I love the sound picked up my that nozzle cam.
freakin rickrolled by a damn 3d printer
Were you able to complete input shaping?
Yeah of course, just use a different accelerometer
This video has encouraged me to build my own! 30k acceleration/1000mm/s…………great video.
is this using the TMC5160 pro ?
Yes, this is not even the external TMC5160 pro, just the onboard module. But whether 5160 or not, the 48V is what makes the motors powerful
🔥🔥🔥 Absolutely loving this! Keep up the great work!!!!
加油，王大卫！
yessss... this is what i need. i want to try to get one built but at this point what i want, doesn't exist.. this is the closest i've seen to it yet! @4:36, impressive!!
Hows the esun petg behave on high flow? I been having layer adhesive issue with many petg when flow is over 20😢, i tried sunlu and overture
Esun is actually one of the brands that can have much better flow than other brands with PETG. When you have layer adhesion issues, either you're printing too cold or cooling too much. I print PETG at 250C with 20% cooling on the 4028 fan.
Do you have files for the printheads? I want to make an IDEX printer and those printheads would be perfect for my build.
I will release the files on Printables soon. At the moment it's still missing the endstop mounts
I am also working on this build myself with a rrf board and so far the hardware is pretty easy and wiring is easy but time consuming. But it feels like there is limited information on slicer setup
We'll get there
Der Meister am Werk
I have this one stuck on my mind long time ago 😅
Awesome build! Do you have a link for those clamps for the frame?
a.co/d/9CzEE6L
What slicer?
SuperSlicer
Do you share your settings? That what I use, just curious how yours compare. I'm just getting started with it @@davidwang_3d
Jesus is that a soldering iron made for a giant? I've never seen one so big
That's a 80W soldering iron. I sometimes have trouble soldering large pads so I use a large one
@@davidwang_3d nice! How's the ercf working? Any tips or mods etc etc? Looking to get and build one soon
@@BradTN7 It's difficult to get it to work reliably, not something that you can start a print and walk away with, however for smaller MMU prints it is still much easier than manual swapping. The filament tip tuning is the key for sure.
hi, what is the max temperature your ho-tend can raise...?
350C is the max that PT1000 can detect I believe.
What a genious!
How much pla did it take to make all the parts?
None. I use PETG, not PLA, and it used less than a spool of PETG per color.
@davidwang_3d oh I see thank you I was just curious.
Hi friend, I just built a system exactly like yours with hotend rapid. However, I can't get rid of the lines at the ends. Do you have any tips?
Stringy filament tip? I just leave it for now, it's difficult to get rid of them
Hello, nice video. Can you help me and send me a picture of where you connected your PT1000 thermistor? I use the Octopus Board H723 and it shows an incorrect temperature value in Klipper. Since the slots are intended for PT100 thermistors. Your Rapido UHF has such a PT1000 sensor? Maybe you can send the printer.cfg along with it? Feel free to buy yourself a coffee too. The documentation doesn't show this. Thank you Patrick
Message me on Discord, NecroDavid#6294
Hi, can you give me a tip? Where did you connect the PT1000 sensor from the Hotend to the Octupus Pro board? Or do I have to change something in Klipper so that it shows the correct temperature. 😊
Message me on Discord, NecroDavid#6294
What is the point of this ?
what's the best accel you could do @ 24V before skipping ?
No idea, I built my printer with 48V
I really don't know what to do with my ratrig. I got to a point it's "consistently reliable". Not mega fast but it's quick enough. I want to upgrade it rather than putting out another £1000 + for a 2nd printer. I don't know if I should do AWD or IDEX.
IDEX will not make it fast. IDEX gives you the option to print two filaments with quick tool changes. AWD will make your printer faster. If you want to save costs, start at using 48V and TMC5160 for your XY steppers, and it you are not happy with the performance, then you want to go AWD.
Does installing a cable chain in the toolhead make the recommended Accel lower? Your cable chain looks very long. But it doesn't fall down. I'd like to buy it, too. Can you give me a link to buy?
I no longer recommend using a cable chain since the EVA 3 upgrade, the 4028 fan will run into the frame side of the cable chain holder.
Really quiet machine. I have one RR 500 on finish. few days to start it.