Video

Can be used in plastic

i bought my pro k2 but it keeps disconnecting in wired mode any help?

Hey, the power switch on my Aula F75 x Epomaker broke. I was wondering can i use the same switch for my keyboard too? It has three modes, wired, Bluetooth and 2.4Ghz Receiver. I cant find any info if the switch would fit my board or not. Please let me knoq.

Is it needed to get a DPDT switch for the 3 way switch? or can a SPDT be used (like the switch in this video)? I see this post suggests a DPDT switch but it seems there is a 50 50 split on which ones are used and one should work and the other shouldnt?

I have only black cartitrdge and this method is not working

For those engaging in this or other electronics soldering using heat gun, consider isolating everything around the part in question and also plastic elements of the part itself with Kapton tape. It should shield surrounding and vulnerable components from excessive heat. Otherwise, use a welder pen to avoid damaging anything around.

Great video just in the right time !❤But can this fix K2 v2 also?

Top. Thanks a lot

I bought my k8 with the switch broken because the previous owner had tried doing a foam mod and broke the switch. I was able to get it working better than when i got it because of this video! PS: I went through atleast 5 switches because the stem KEPT SNAPPING OFF everytime I tried to put the keyboard together. I found that trimming the stem a bit with a fingernail clipper made it harder to snap off and i was able to get it put together withiut it snapping on me!

Can you show me how to replace front caster wheel which the body already broken?

Just did this repair yesterday and worked like a charm. TIP TO EVERYONE: if using a heat gun with a smaller nozzle make sure you monitor the plastic slider tab when heating the solder paste. Thankfully I caught it in time, but if I had looked away for even second, I would have melted the black tab off the new switch and been back at square one.

god send thank you from Texas

This printer and ones like it should be made illegal! The only thing they do well is pollute our world.

ohhh u own inknovate

Didn’t realize it was my switch that was busted because I always connected via Bluetooth, but it disconnects and resets all the time.

thanks for the video

seems like quite difficult to clean the fans? have to unscrew everything?

My switch failed on me after a bottle in my bag opened, going to try this out when I have free time so salvage the board!

bought for £2 at a charity shop. Didn't know what I'd use it for - I do now thanks.

Me hubiera gustado ver si es cierto que se regula la fuerza del engrape

Garbage

bloody legend, very helpful!

if the bulb spoil, must rechange the whole thing?

Tip..Just Complain on CZcams like a Singaporean to get free replacement

Got the replacement for the Bluetooth/Cable toggle switch and that worked like a charm but a few months later, the Windows / MacOS toggle switch also had the same issues. Do you have the part number for that too? 😁

Wow mine just broke and I immediately found your video to see if others had problems with this switch. Thanks!

hello, your acrylic panel seems transparent when you tear off the protective layer, but when you install seems to be frosted. did you paste a frosted sheet over it? or I need to tell them frosted acrylic panel?

Wat about the power of the fan ? Is it good ? Does it help with drying of the toilet ?

Инструмент такой себе брал для дома.. провод 4 мм2. часто такое бывает что один провод норм откусывает другой просто рвет не пойму чё за бред..

Could the power supply alone be replaced? I have similar led ceiling light for years but it could be light up occasionally. I think my led power supply maybe failed. I may try to look for one power supply and replace my existing one.

Where frA toolsen china America Taiwan corea

I recently got this exact same headrest for my Haworth Fern chair (Atlas makes them now). I despise mesh headrests, so this one is perfect for me - I absolutely love it. I also have an OfficeLogix one pre-ordered for my Steelcase Leap V2, but they're not expecting to ship until late May. Once I receive that one, I'll have a better idea as to how the two compare against each other.

Now i knpw how to use the nail ha ha

Very clear video! Does the 70mai capture longer videos while driving? Because my Hella DR850 sometimes just captures over a minute recordings. I'm also curious what happened with your crash incident !😊

Subscribed ! Does the alibaba toggle switch would work for Keychron K8 Pro also ?

Thank you for making this video

Why did u use clear acrylic instead of white opaque acrylic?

Kitna number pin hai

Thank you very very much!!! You saved me!

Es una basura.

How was the replacement switch, did it last longer than the original?

Thank you for the video. Keychron customer support is not so great. Happy to have found this to give it a try. Appreciate you putting parts in here.

nicely done

for 100 bucks i could purchase another chair

We have a similar switch. On the app ita says the switch is on but the swithch has the blue light on. When I press the switch manually it turns red (but it is a muted red) and the app says the switch is off. I am confused. When is it on and when off???

Hi, thank you for the instructions, but i am unclear on the earth because i find it confusing from the pinned msg. From what i see at 2.05, the 2 earth wires are wrapped individually in yellow tape(what is this) and connected to something metal(what is this) and shoved to a corner of the socket. Is that how i shd do? Or shd i connect the earth to each other using a plastic connector ( the white tubes you can press on that can be found with lights?) sorry, i am new to do and not familiar with tge terminology

Your old light has 2 fluorescent, how come? Both on at same time or can each switch on separate? Then use remote control to switch or 2 switches? Seems like new LED is only one switch, so cannot save electricity use.

same issue here. Offer of replacement for USD60.00 including shipping. Then they proceeded to invoice me for USD99.95. No offer for a padded option so I have just emailed them back.

I just tried a K8 and the on/off switch was a big negative. If you are going to leave it plugged in and on there would be no problem. But changing settings is not a great experience. For a keyboard with such great reviews I was surprised how awful that switch was.

Lousy head rest. Give this a miss.