Video

Thank you. I like this set, because it is made for metric.

Happy New year❤❤❤❤❤❤

I just tried it, My RV floor had a 6 inch hole with some electrical running through. I put a plastic tubing on the nozzle, turned the can over, pushed the lever. The foam went 3/4 up the tube, blew the tubing off the nozzle and foam went everywhere. Tried it again same thing. The foam set up in the tube before blowing off the nozzle again. Just make sure the tube is very short and don't stop

A (very) belated nod for doing this. Am considering this vs an angle finder for purchase at the moment. Still not clear on where the end of the 60 and 30 degree lines are; looks like they could be at the end of the adjacent straight edge (if that makes sense). The reason I would like to know is I need to mark 60 degree angles from the edge of a piece of timber.

You might wanna try the Milescraft stardrive pocket hole screws, much better.

The screws included are shit, they are not for pocket hole joinery

I have one and mine is not square. It’s way off.

Those aren't "Phillips" head screws. They are "Pozidrive" head.

Very interesting concept. I was just wondering how secure the mugs were. I was worrying that they would fall out of the slots.

Hi. Any idea of the weight, please?Thanks

Excellent presentation. It clarified how to place hinges for system 32 which is extremely useful: this was not even in the official presentation of the woflcraft tool!

😮😮

Brilliant 🎉

Would have been nice to see it in action...

Parallel Guide: ban.ggood.vip/11prU Track saw square: ban.ggood.vip/11prS Use code BG8REVITRAGE in the checkout for 8% discount!

Damn... Why did the little bug have to die?😄

Are you aware that you can also do some limited metal turning on this lathe?

I have just sold one of these lathes, excellent machine

Those screws are Pozidriv not Phillips. you can use a Phillips screwdriver on a Pozidriv screw but not the other way around.

Excellent. Thank you for the tip - it will save a lot of $.

Unfortunately this is a example of things not to do. Missed out putting the guide collar in the jig, used the wrong type of screws and should have applied glue to the joint before screwing (thin layer on the end grain left to dry for about 10mins and then another layer of glue before screwing it together).

Very nice explanation video because in the wolfcraft video you cant understand all the features for diy. Many thanks!!

That was awesome

I bougth the 500mm version, this was 2mm off when i received it. This square is not square.

alternatively you can just use orange or red string lights

Good one, was wondering what some of the measurements were for!

Good, video. I wanted to buy Trend pocket hole jig but I will go for this one. Thanks!

B

Only watched a couple of minutes. Couldn’t stand the annoying sound. Not even close to music.

Great video

liked them both but I will get some trigger clamps far quicker ...

The screw you showed was NOT a Phillips screw but a Pozidrive screw. They are not interchangeable, and using a Phillips screwdriver will quickly damage a Pozi screw, and vice versa!

Subik za 12 miałem ten nr w podstawówce w klasie :)

Nice demonstration, I ordered one.

Music makes video unbearable to watch

to chyba ja mam pecha wybitnego, bo moj zestaw nie nadaje sie do niczego. bez wzgledu na rodzaj materialu w ktorym wierce brzegi sa tak postrzepione, ze az zal pzdr

Excellent Will think about buying

Bro your background music is super destructive. you are you singing right are you?

Thank you. I've been searching without success for fire rated foam that operates upright for a similar job.

If only I could work this Fast in Real Life...

Normal screws can easilt split wood - You need to use pocket hole screws with a flat washer type head. I was looking at buying this wolfcraft set but have now changed my mind and will be buying the Kreg (expensive one). Thank you for your video. :)

Next time leave the music out of the video. Oh and get easier to use clamps. Otherwise good demo. Thanks.

Solid info great presentation. Thanks for sharing sir for your time and effort.

3:40 these pieces didn't want to be joined...

Happy viewing, bye ... interesting opening for a video ;). no pun intended.

I purchased a Kreg today. After watching this I'm glad I went that way

This is exactly my problem right now...I'm doing this tomorrow...thanks mate

Does anyone use screws other than pocket hole screws for not so important projects?

Was anyone else shouting, "Use 2 clamps!"

Pozadny video pokazuje ze nie trzeba duzy wydawac zeby dokonac prace. (Good video which shows you don't have to spend a lot to get the job done).