Video

Im pretty sure they can be but haven’t experimented with it. Let me know how it works out please.

Im glad I could help and thank you for watching!

For sure. Great tip. Thank you for watching!

Not a problem. Glad I could help. Thank you for watching!

Hello, its probably frozen in there. Use the forced defrost option. It might take a couple cycles of this to get through ice melted enough for the ice tray to be removed. Hope this helps. Thank you for watching!

Howd the call go?

Thank you and thank you for watching!

Great question. Im pretty sure 240V is not being used by the lights however, you could have a unique application. I would call a certified electrician to make sure before conducting any work. Electricity is not anything to “take a guess on”. Thank you for watching.

Yeah. Things have gotten expensive in 2 years.

It took a couple days for sure. A lot of filter cleaning. I think I ran the pump all night for two days. Hope this helps. Thank you for watching!

@@JustaDude123 Thanks for the reply. That helps! I really like the solution you came up with and appreciate the video!

Thank you! Very much appreciated too.

Definitely but if you could have something that made considerably less smoke that would be good too!

Thank you and thank you for watching!

Thats awesome! Im glad it worked it out. Thank you for watching!

Yeah, I saw that. They want a grand for that now. Id just try to buy the block individually then purchase the top piece for on amazon. Theres a link for it in the description. Might be able to save a few bucks. Thank you for watching!

Ive had some one comment where they did the same thing then, one day, after three weeks, it just started making ice again. Maybe just let the fridge sit for a while. Also, Im sure you already checked this but just make sure the ice maker is on in the front door display.

From what others have said, its common for the chime to not happen. Its just a waiting game now. One person posted his ice maker started making ice one night three weeks after they pressed the reset button.

Can say….the tech never mentioned trying this defrosting mode, crazy as that it! This should’ve been the 1sr thing they told us to try!!!! Thank YOU for this! Hairdryer worked though. Will update. 🙏🏻🙏🏻🙏🏻

Well….ours doesn’t go into FD like your model so back to the drawing board on that! Ours is a 3 drawer.

Im sorry to hear that. Sometimes you have to use the FD mode a couple times to get it to work. Also, when using the hairdryer make sure THERES IS NOT HEAT. You just have to run room temperature air over it. Its ice. It will melt with room temperature air. Remember the inside of the fridge is plastic and hot air will damage the fridge. You can also just leave the door open. If you have another fridge or and ice chest you can put the contents of the fridge in to keep them from spoiling it could be plan C. Hope this helps. Please let me know what works for you. Thank you for watching!

Hello. Use the forced defrost option to try and get the ice defrosted enough to remove the ice tray. It might take a couple cycles of this. If that doesn’t work, you might have to call a repair company to come out and im not very familiar with the refrigerator which has two ice makers. Sorry I couldnt help more. Thank you for watching!

Im sorry that happened. To find the right parts for the appliance you have, I would search the manufacturer’s name and model number on google and try to find the parts you need. If you order the parts by manufacture and model number theres a better chance of the parts fitting correctly. I hope this helps. Thank you for watching!

Thats awesome! Thanks for the info. It’s good to know they’re still doing this.

Temp is at 0, water pressure is good, no kinks in line, line is clean

Just wait now. Some people have commented it has taken up to three days for the ice maker to start working again. I hope this helps. Thank you for watching!

Sorry. Just found one comment which stated after 3 weeks the ice maker started working again.

​@@JustaDude123 did it work?

@cristalmartinez3, did your ice maker works now?

I did build another system with two large whole house filters and plumbed it back into the pool discharge line so just the hose and the pump went into the pool. It worked out for about a year than the sump pump stopped working. I did a video on it.

@@JustaDude123 do you think it was the design that made the pump fail?

Maybe that or, just a lot of use from a pump not designed to be used like that. Sometimes I would let it run over night but the pool water was the cleanest Id ever seen it.

No problem. Glad I could help. Thank you for watching!

Im glad I could help. Thank you very much and thank you for watching!

No problem. Glad I could help. Thank you for watching!

Great question. I would recommend using fire bricks between the pavers and the fire to prevent any damage being caused to the pavers by the heat of the fire. I recommend fire bricks because they wont “pop” when they get hot and send hot pieces of rock/bricks flying at you. I hope this helps. Please like and subscribe. Thank you for watching!

Im glad I could help. Thank you for watching!

Awesome! Glad I could help. Thank you!

No problem. Glad I could help. Thank you for watching!

Thats awesome! Glad I could help. Thank you for watching!

Thats what it seems like. Now, you just wait. People have commented it has taken up to three days for the icemaker to start working again. Hope this helps.

Seasoned wood does help!

Thats awesome! Let me know how it goes. And Im sure you know, but never have the pump in the water when people are in the pool.

Did you get it working again?

@@JustaDude123 Yes, the drawer is full of ice. It might be a little slow but I don't use a lot. It has been close to 2 weeks and it made ice again this morning. Big Thanks.

@Toffsen2525 awesome! Glad I could help. Thank you for watching!

Thank you and thank you for watching!

It did skyrocket in price! I haven’t checked the prices on the kit vs getting just the stones recently. Do you happen to know what the prices of the stones are?

@@JustaDude123 We have a place near us that we can get them all for around $300. Still more expensive than what you paid but not $900 bucks.

That does seem like a great deal now. Between the stones and the fire insert youre still money a head.

Im pretty sure theres a screw in the back of it holding it on. Sometimes it could be covered in rust or grease or rusted out making it hard to see. Take a wire brush to the back of the burner and clean it up. The screw should be easier to see then. Hope this helps. Thank you for watching.

Thanks for the help!!

No problem.

Great question. I think it should. There was another comment about someone using it on the bucket of a tractor to keep the concrete from sticking to it. Please post back if it does work to help others. Thank you for watching!

Great question. From some of the comments, after hitting the reset button, it could take up to three days for the ice maker to start making ice again. Hope this helps. Thank you for watching!

The second channel would have been nice. I made a slide for mine and ran the second guide along the outside of the saw along the saw’s table edge. Thank you for watching!

Thank you very much and thank you for watching!

It might but people have also said it takes some time. Ive had comments where people have said the ice maker started working again after 3 days. I would leave it alone for a couple days and see what happens. Have you tried calling Samsung?

@@JustaDude123 Yes, my wife called and contacted Samsung. We've had the fridge for 6 years and they came out and replaced the ice maker for free. Working great now. Thanks!

@roccos7642 thats awesome! Glad I could help. Thank you for watching!

Im glad I could help. Thank you for the comment and thank you for watching!

That awesome! Glad I could help. Thank you for watching!

@@JustaDude123 YOU ARE THE MAN!!!!!!!!!!!!!!!!!!!!!!!

@non3tt3 thank you again! Please like and subscribe.