Video

The wood is outside it gets water Every day

Hello, maybe u have another brand then mine. Mine Said to heat the foil until the wrinkels were gone. The foil itself is pretty sturdy it is still hanging without any cracks. And i think there is 2cm of air (think its close to an inch)

@@bechill1873 thanks for your answer. No it's exactly the same brand. But it seem impossible to press it against the window. 2 cm with air seem right, so I will go for your method. :)

@@ytringer let me know how it goes !

​​@@ytringerthe packaging says it "forms an insulating cushion of air" so there is supposed to be left a gap between the film and the glass. It doesn't say how big though, but I'm guessing a couple centimetres does the job 🤷

I read not too much of a space between the window and the foil.. About 1,5 cm.. No less. Not much more.. Because the air is an isolator. But if you have too much space between the glass and the foil.. There wil be convection. Meaning the air will not be standing still but there will be a loop that will lower the insulation. It will be a rotating/movement of air from low too higher and down again.. and so transport warmth form inner side too outer glass..

In sound is not really a difference

Strange, what attachment do u have for u pressure washer ? I used a turbo nozzle.

@@bechill1873 Just tried it once more, it's a Karcher K4. Trird with both types of nozzles on max pressure. It cleans patio tiles but the wine barrel seems immune to it unfortunately, gonna try sanding it hopefully that works.

@@smeshfactory3992 hope so to for u, keep me posted !

@@bechill1873 Sanding is definitely working however it requires a lot of elbow grease and going through a fair amount of sand paper, I'll have to pick some more up tomorrow. Not sure if you can help but my barrel was used for Whiskey. It looks like it's charred on the inside, completely black as if it's been burnt. I'm going to use it as a pot for an olive tree, what shall I do about the black interior, do I leave it or apply some type of coating etc? thanks.

@@smeshfactory3992 Maybe put some foil on the inside of the pot as a Barrier?

And yes it keep a Barrier for the heat to

I think arround 1600

At some point i redid a window the sticky tape is easy to remove but I didnt take it away as it should work in the summer to for the warmth, the window itself is painted wood. And thank you for the kind words glad u liked it !!

​​@@bechill1873 ​ Can I ask you why at some point you decided to re-do / re-apply the Thermo film on one window ? Was the film detaching from the adhesive tape or perhaps the themo film by itself get broken / get any hole ? Anyway, I am pretty surprised (and really glad) that, as you wrote, if you remove the double-sided adhesive tape from the frame of the window, it doesn't leave traces of glue or it does't stain the paint / fade the paint / whiten the paint or it doesn't detach some small pieces of paint from the frame. I would have expected definitely some problems like that, expecially on a woden frame painted in glossy black colour like the windows you filmed. Really useful informations and experience 👍. By the way, maybe have you any further suggestion / advice to give me, overall, about this product, its installation and its functioning ? I have decided to put this Thermo film on my windows as well; I live in New Zealand and winter is approaching 🥶; but I have in mind to keep the film on the windows only during the cold period, because I am afraid that, from an aesthetical point of view, it spoils the general appearance of the window / of the house (it can be not nice looking).

@@ooogappp i redid one window because when i was applying the film i Just messed up human error. And yes u can see the film there but it is not bad when all the wrinkels are gone with a hairdryer Just for cleaning the window it is a fine plastic film so u need to be careful

Is what i found on google let me know if it works ! Mix a tablespoon of sodium percarbonate or soda carbonate per gallon of water to make a cleaning solution. Make enough solution to fill up most of the barrel. Swirl this solution around in your barrel to get rid of the mold or smell.

@@bechill1873 I'll give it a try. Thanks

Not a Massive diference but it is a bit warmer if u sit close to the window

Thanks for the comment ! Glad u liked it

thank you for the reply, hope ur barrel stil came out great

Ur welcome!

Thank you !!

I dident have any issues with them, just casual driving when Passing them

Guess they Will fit better indeed u have a link ?

@@bechill1873 www.ftspeed.com/part/su003-06969-toyota-2017-toyota-jdm-oem-black-mt-traction-control-buttons-2013-ft86#.X3ONijM8ydM

First thing that comes to my mind is checking your rubber hangers of the exhaust ?

Thank you for the reply, i think it is because of the music i used, the pressure washer i used was 1800 psi with a small nosle maybe u used anonther one ?

@@bechill1873 Hmmm, The way yours cleaned so easily, I would guess 3000 psi or more. Do you remember the make/model and/or size, like was it small and portable, or larger on wheels or trailer?

@@chef6965 its a karcher model i dont remember i know its arround 130-160 bar so for the psi i used a online covertor and it a meduim sized model on wheels not portable

@@bechill1873 Great, thank you for that info. That puts it at 1800 - 2300 psi. That makes sense. Just wish I'd found your video before I spent so many hours sanding!

@@chef6965 no problem glad i could help

Borla

be chill do you have a link to it I couldn’t find it anywhere

It was an oak barrel and they where algae the top part is rot en needs to be removed. U can try to use pressure washer first to get the most of dirt and algaes of it ?

be chill I’ll give it a whirl. I may even get it blasted as I think it’ll be stubborn to remove. There’s what looks like sap and other grime. It’s an aged barrel.

@@doug7844 maybe look in the shops for a good wood cleaner, less chance to damage the wood ?

power washer will NOT wash off age LOL - learned that the hard way.

20 to 120 bar 290 to 1740 psi ( online conversion)

Karcher hd650

yes it is non resonated

It is quicker indeed but for perfect finish sanding after is key

Do believe the dyno can compensate for that loss.

Just water

U are getting used to it but in the beginning it can be loud :D

@@bechill1873 Is the exhaust legal in belgium? or do you take it off before you go to the inspection? (i'm buying one myself and also want an exhaust setup like the invidia N1 or N2)

so u mean ur n1 is not the same as mine shown in de video ?

i got the same one for my 86. its only to muffle the sound if its to loud for the driver. wont effect mpg or engine

steven garcia thanks steven

I get what u mean no its only to muffle the sound indeed like steven said

they are in an other video, the lights are valenti smoked

u can find them on ft86speedfactory

front headlights are still the same

i really have no clue in my country the cars have different wiring so the pieces cost me like 1-2 euro

i have the injen air intake

rhyan jimenez haha u can spit more fires with a custom tune :D

i knew i forgot something :d

merci ! heb alles zelf en besteld en geinstalleerd kun je zien in andere video's :d. en super ben je al bij ons op het forum op facebook? en zeker doen zou ik zegge geeft direct een ander karakter aan de wagen !

Is dit toevallig het forum: facebook.com/groups/237913563033769/?fref=ts ? Zag je het filmpje van de bijeenkomst in België dus ik was al opzoek naar die groep! ;)

klopt je hebt ook nog gt86 benelux das zowat de meer actieve!! binnenkort is er ook een meeting in doel als je kan komen ?