Video

pretty sure getting the clip back on was the hardest part when i did it lol

Day light LED?! What's that for? Sun is not bright enough? Ok thanks for making this video.

I’ve been wanting to get a short antenna. So thanks

thanks for the vid bro 💯 i was holding off on buying these cuz i was confused on how they were installed since the oem had the plastic press clip.

Nice video very helpful 🎉👍

Mine I put 6 quarts in mine

I took your recommendation for the psc steering box! ❤I’m in love with its quality. So I trust you with these reviews 😅 I have an 02 ecsb 1500 leveled on 20s n 33s with a cammed 6.0. But I want it so stoutly built like a 2500!!

Great video, how did you end up mounting the cooler? Vertical or horizontal?

Man I got the same camera I hooked everything up even the two small red wires together and I have to put truck in reverse and hit the camera button but won’t do it it park or drive

Yeah I’m definitely going with 50% after your video and another. Was gonna go 35% but I think 50% is perfect.

Does it make it easier or not to remove the airbag first? If the connector on the end of the wire is damaged do you have to remove the steering wheel in order to access it for repair or replacement?

The wire is shorter for the bottom left pair of buttons on the steering wheel. I damaged the the end. How do I get to it to repair them?

Thank you for posting this video. And fornthe good info on the sensor, and the 2 studs. Getting ready to replace my pan with a PPE. Did you use a torque wrench on the pan bolts? Just wondering what torque spec to use, I don't want any more leaks. Thanks.

Is this a lly or a lbz?

I have 5100’s on my lifted tundra! They are most definitely noticeably better than the shitty rough country cheap ones I had

All you have to do to install is tighten the bolt right?

It is a nice idea to replace the plastic part But by following people's comments on CZcams and Amazon, there are many people saying that it is leaking

What did u use to install super glue ??

what were the signs your old tie rods were going bad??

I installed all 8 on a 2007 Chevrolet Silverado Classic 4.8 now the front bumper has a gap how do I fix it

My 2006 tahoe makes pops on turns when the weight shifts to either side, do you think it is the body mounts or is it the torsion bar cross member bushes?

Did you ever try the rear hydraulic mounts?

I have a 2008 Silverado that has hyper flash, I have switchback turn signals , how do I fix it?

How did you wire thru the cabin?

heh. mine don't light up. (they used to)

You keep saying how east it is but dont actually show where you hook it up exactly your showing a gauge and the copper wire in the engine bay. Show where exactly its hooked up and to what part specifically.

I had these but they did not screw on far enough

yeah i once sanded to Metal and painted an entire work Van for $500 including the paint and clear , 😢 took me 3 days the owner said to help but he didnt , i shoulda took the $200 tip he offered , i later jumped into Collision frame work and more in dept things vs easy money , yeah u coulda sanded the whole car then prime it at the 180 grit or 320 , primer does MAtter !!! im working at some shop and their primer is not doing it like other primers ive worked with and its expensive aswell , and its 2k , yeah jst make sure to spray it 2nd time after the first spray mildy dries well u can let it dry completely if you want but when ur on time and do this for money at a shop yeah time is a factor , i managed to peel off all of the paint with a speed sander , people that sand homes for painting have some , the home depot is truly a good friend , but yeah for $100 u can do it yourself w a single stage gallon from Ebay or Amazon , or just spray rustoleum , im jst truly impressed because its true !!! Rustoleum is way more Durable !!!! and cost effective , this proofs car makers arent so Smart at times

Where can I get this grill?

I bought these speakers back in 2014 the first pair I had were the SPR‐17LS to replace some MA Audio and Some Orion / West Coast Customs-650cs because the glue had come undone around the cone, about 1 year after I tried to get another pair of the same ones but they had been discontinued so I had to settle for these. I put them in my rear doors o my Vw Bora/Jetta MK4. They hit hard but not as hard as the previous model I still have them till this day. I am thinking of putting them in my 2013 Toyota Yaris as they cannot fit in my Bmw... I managed to save them by Glueing them. So now I have 8 6.5 component speakers and tweeters which have been sitting for years and just like PS1/SEGA MEGA DRIVE-GENESIS they need to be played... I cannot have shit collecting dust. I might be old now,but back in the day that Vw Bora/Jetta hit hard... Now its time for Little Tokyo Oi Oi Oi.... I want to put the 12 type R in The BMW I just checked I believe I killed the type R and got A Pioneer 12😢 Big up all the way from London England 👌

Hey man awesome vid I’m just trying to figure out which ones are my best option for mostly Highway, bilestin’s or fox?

Your DASH look like a Hollywood Movie. #1

Thanks for wasting my fucking time 🍆

It’s not about it being a Honda, it’s the type of Honda YOU have and the engine YOU have😂😂 you probably drive a single cam

Thanks now I’m about to remove mines when I get off work just to see how my avalanche handle without it.

Got under my truck to see how bad mine were… they aren’t there.

Is that really a 50%?? lol looks like a 35%

THANK YOU SO MUCH! I would have never figured this out for my 04 Yukon. Really appreciate it.

Just replaced mine last night. I had to swap them this way as I am embarrassed to say this, but I couldn’t get the airbag clips apart. I had every intention of taking the steering wheel off and just doing it the right way but I didn’t want to break those air bag retention clips and cause a bigger problem. Twenty year old clips tend to not be very forgiving if they have never been apart before. And yeah, the bottom left is the pain in the ass as there is next to no give in the wire harness. Probably spent 20 mins on it alone. Top two were done in 10 minutes combined. I already had the pick tools, got them free at HF, ITC member. Got the SWC buttons off of Amazon, along with a couple other switches and parts. Truck looks a lot better now without the peeling buttons.

Dude, it looks great. Good job.

This video is why I did oil pan before I had my transmission done with all new lines

Did you have to trim?

Used stiction eliminator in my 2001 Powerstroke 7.3. To my surprise it made a big difference. Use it and their other products regularly. Also important as an engine lubricant due to low sulfur diesel these days.

Just curious what made you take off your traction bars?

Thank You !!

Thank you 👏🏾

I have a Chevy Tahoe 2006 basically I have LEDs all around the truck. I would like to know if switchback fog leds with fit on my truck.

2007 classic 253k miles started a slight surge but seems to be running good but that little surge I do have a code with that turbo sensor do you recommend changing it I did change the fuel filter because I did have water in my fuel

Is this the light blue or blue caliper wrap?

Why not just do the bed one shot