- 9
- 85 771
Fixin' It Productions
United States
Registrace 4. 07. 2021
Just Fixin' It All. I like to get my hands on it and bring things back to life.
Video
Cub Cadet RZT S won't start Fix solenoid battery tires steer linkage vavle adjmt cam shaft Review
zhlédnutí 2,9KPřed 2 lety
I bought this mower off of FB market place. It only cost me $400 but I feel ripped off. The guy told me it just needed a starter. Upon intial review it had the wrong battery then the soleniod was bad and then the engine wouldn't turn over easily and 3 of the 4 tires were bad and then the steering linkage needed fixing and I still have to replace the operators console since it is broken. All in ...
Echo GT 225 Does not run at full speed FIXED IT with FIRE
zhlédnutí 317Před 2 lety
Was drinking beer with a friend and he told me his weed eater would run, but not at full speed. He asked me to take a look at it and of course I did. Had a little fun with it and hope you enjoy. Share Like and Subcribe if you like the content.
John Deere D105 Mowing Deck assembly and Installation.
zhlédnutí 3,5KPřed 2 lety
Previously I had gotten a JD D 105 and it was not driving. After installing the Variable Speed Pulley in Part 1 and doing a lot of deck work. I am now completing the deck by assembling it and installing it. And let me tell you the mower looks great. All though she is not at 100 %, she like to shake when the deck is engaged. But like always I will find a fix for it. It'll just have to be in anot...
JD D105 Replacing the Secondary ( Variable Speed) Pulley using Zip Ties and other work PT.1 REVIEW
zhlédnutí 41KPřed 2 lety
My friend gave me this really nice JD D105 with only 225 hrs. He hadn't used it in years because his General Transmission secondary pulley had gone out. Apparently it was not worth repairing but I am going to give it a go. Enjoy the video.
FREE AND SIMPLE MOD GET 6 MORE MPH Coleman Mini Bike CT200U EX
zhlédnutí 10KPřed 3 lety
My son was not enjoying his Mini Bike as much, complained about it being too slow. So I fixed that problem for FREE. Now he is getting 6 more MPH and he loves it. Thanks to one little simple trick. Hope you guys enjoy the video.
LG WM2101HW Front Load Washing Machine Won't Turn On Main Control Board Replacement
zhlédnutí 24KPřed 3 lety
My 11 year old front load washing machine quit on me in the middle of its wash cycle. I tried resetting the computer but it did not work. My only options were to call an expensive repair man or go buy a new washer/ dryer set. But then my light went off and I decided to tackle the job all on my own. I'm sure glad I did because it only took a fraction of the cost and a little bit of time. I hope ...
Never Change your Vapor Canister Purge Solenoid again ( 2006 GMC Sierra ) FREE AND CHEAP FIX
zhlédnutí 96Před 3 lety
Once again the dreaded check engine light was on. This time I took it to ABC auto and they quoted me a price of 42.99 for the Vapor Canister Purge Solenoid. They told me it could be stuck open or closed, but before I dish out on some hard earned money I want to try a little MMO hack. I injected it with Marvel and reset the check engine light and drove around town. Lo and behold the light has no...
2003 GMC Yukon SLT 5 3L V8 O2 Sensor Replacement
zhlédnutí 3,8KPřed 3 lety
Been running my 2003 GMC Yukon with the check engine light on and I think its about time to do a quick fix on it. It's an old truck and not a daily driver so I don't want to sink in top $ into it so we are going with an off brand product and gonna keep an eye out on it.
So Im in the process of replacing mine, I notice on the new set there is a hex shaft, when the two pieces are put together, the upper does not spin, they lock together as and spin as one piece. This might be correct, if it is what is the point of having a bearing on the shaft?
What the heck kind of a world are we living in when you take your equipment to a repair shop and they say, ehh, that things not worth fixing.... this country has gone to pot 😢 I took my engine to a local shop for a simple repair and he kept it for a month no call nothing, I told him to just keep it 😅
Don’t buy any brand with the plastic trans period 😊😊😊😊 Most shops charge for 5/6 hours labor 😢
Very nice, helpful info.
nice! after cleaning the caked on grass and dirt every year I prepped all the rust like you did, then I painted it with graphite paint. nothing sticks to it now.
I'm having problem with my belt my pulleys are good the belt is brand new and it just pops off
Excellent video. Thanks. Subscribed.
A lifetime of knowledge, makes it look easy 😎
You make it seem so easy unhooking these wires is nearly impossible.
Hey man I'm in the process of doing this right now and need help is there anyway possible I can call you? If you have the time or if you can help me answer a couple questions on here I would appreciate it
Best video!
Someone shorted everything out it’s not the mowers fault it’s the operators like every other think wrong.
Great video!! What are the initial driving symtoms before the transmission pulley fails? I have over 200hrs on my JD130 lawn mower. I just replaced the main drive belt. I have noticed there is less and less power while going forward or in reverse. When I raise my foot off the gas pedal it seems to regain some power but not much it then gets slower and slower. Would the transmission pulley be a likely culprit?
@richardw4132 mine just failed at 201 hrs. That little screw broke or fell out and the metal cap disappeared in my field. When you say "less power", do you mean less speed? The short belt around that pulley can wear out and cause less top speed. But try this: Take a blow gun and try to clean every bit of grass off the top of the trans. From all angles. It builds up under that pulley and in the linkage. When my top speed slows down, that always helps.
Wish i had watched your video first. The harness pissed me off so bad i had to step away because i found myself daydreaming of cutting off all the wires to pull out the motherboad box.😂
Where are you guys ordering the motherboards from? I have the same power issue. Sounds like an LG recall that needed to happen but didn't.
All you had to do was bend that down or cut it. You need to do Governor mod with zip tie
Glad I found this video, got my board fixed and washing machine running, thanks for the video!
How much did it cost you?
VERY WELL DONE, GOD BLESS
Great help, defined my problem exactly. The process steps and kit part number are very helpful. Thank you.
Bad idea! This engine as build, is designed to run at a maximum RPM of 3600. Running faster than that, can cause the ignition magnet to come off of the flywheel doing irreparable things to the engine! This happened in my case. The glued-on magnet came off of the flywheel and broke the coil and its cast mountings, loose from the engine! Now I am SCREWED!
lol that’s the fun part about these you do everything you can think of to make em faster. If something terrible happens to the engine you can buy a brand new engine for less than 150 bucks.
Thank you, thank you, thank you. Our machine wouldn't turn on and I did what you said by unplugging the washer and holding each button down 5 seconds and plugging it back in. Praise God it worked. You saved the day!
This is awesome for D 105
bro called the washer a computer
Good stuff
You need to put a small spring on the screw to keep tension on it so it wont move once you set it.
I got questions for you i have the same truck
First off - great video! - just finished reinstall and am doing my first run. Next - dude you must have gorilla grip fingers! I ended up carefully using a pair of small channel locks. I found a slight wiggle, side to side as you pull sees to helps. Another thing that helped me get the controller to a "easier" working position was to squeeze and push in the blue plug from the back of the machine - it will let you pull the wires out of the way a bit. Again great job and thank you for postiing!
Fact is every 100/200 hours expect to replace it, that’s what I see happening in our shop Just cheap crap Green doesn’t mean Good anymore folks Buy from a dealer is smart 😊
Mine failed at 163 hours.
Mine just blew the spring cap off at 201 hours. Found a kit with the pulley, spring, cap & screw on Amazon for $26.
Great short video thanks
I’m confused to as the how the washer and the screw attach to the top of the pulley?
Remove all the inside cover on brging and you’ll save time and money, plus down time during busy Season
excellent, just got a new LG washer 2yrs old, only needs that same board
How long did this repair last without it coming apart again?
Average is 150 hours
Nice work bringing this unit back to life! I still can't figure out why the new cam fixed the starting issue. The old one didn't have any defects that I could see in the video.
ok you forgot to mention the most important thing. part number where is it located mine is almost the same but the numbers "3357" are different mine EBR32268007 IS THIS THE PART NUMBER OR WHERE
I just snipped the tab off so the screw goes over the tab. I was lazy haha I just had to take the air filter element off to get my snips in
Perfect. Thank you!
Does that board control the temperature as well?
I believe so, this is the main mother board for the whole unit.
Amazing work, my washing machine has the same problem, I have check everything and tried every trick but it looks like is the mother board which is very expensive
I tryed the zip tie trick and works great, just scratch up hands and arm a tad No big deal and hour and half done
That throttle stop and engine governor are there for a reason! 🤦
Yeah and the engine is also designed for lawn equipment. Lol you have to make modifications like this to make it go faster. Do you think they run stock engines in nascar? No they modify them against what the factory deemed right for a daily driver. We don’t rely on mini bikes to pick up the kids at school or go to and from work. We wanna rip around and go fast. And when the engine goes out we can but a whole new engine for less than 150 bucks and do the same stuff we did to the last one because it’s fun
Could have just cut off the threads...
Truth is I think the repair shop was trying to steal his mower for nothing and fix it later Crooked people
Well done and it’s as good as new now
Good information 👍
Great video! Was easy to follow. I did these steps and got the gov removed but now when I’ve got throttle full out it backs itself off then re-engages. Any advice on what could be causing and how to fix?
The linkage probably has too much play in the spring. The stock spring on the throttle assembly is too long and binds up. Look up bike model you have followed by throttle linkage assembly and there's a ton of mods you can do to make the throttle wider(more minute changes in throttle doesnt feel like off or on anymore), feel more responsive, and no cutting out. I've found that if you pull the throttle as hard as you can trying to go top speed it goes slower haven't modded my linkage yet been riding a dirtbike but it seems simple just didn't have any videos a few years ago. Also throttle cable replacement is a good way to see people set it up the best way
Nice Job! I wished that I work as fast as up do :D
Yea but I’m 72 and took 1 1/2 hours to complete it
@philliphall5198 glad to hear that! I am 65 and about to do mine today.😂
So i brought a new motherboard just came in yesterday plugged everything back up put a load I. And the same thing happened again midway thru it cut off and won't cut back on 😩 any idea as to what it maybe maybe??
Really hard to tell without being there to put my hands on it. Was the board used or new?
It was used soon as I plugged it in the lights came on maybe 10mins later it won't come on anymore like i blew it again smh 🤦🏾♂️
@@jjayno2003 So, I bought mine used also and it is still going strong, I may have to asssume that the new (used) one may have gone bad, just some bad luck I would assume.
Did you test the noise filter? That's another common problem. Power goes through that first.
@@bradshannon862 yes I did!!
I just had to buy a new engine for my ct200u i just installed it it tops out at 20 if I remove the Throddle screw will it cause any damage?
It did not cause damage on mine
yea it can cause the values to float so what u should do is replace the valve springs to some 18 pound ones to fix it
Your two JD videos are excellent. You should keep making videos. Really like the way you show the details.
Why won't my D105 go into high gear? I replaced the pulley but not the belt. Sadly, the existing pulley looked fine.