Video

No worries! Good to see the video was usefull

Thank you very much! Highly appreciated :) And yeah... I wasn't the first to have this printer in.. And well what is the use of a channel like this if you (me :P) don't want to put in the effort :)

Hmmm have a look at the Diatone site.. I haven't seen quad related news from them in years.. To bad.. I liked the brand, but they seem to have thrown the towel (?)

@@DutchRC Appreciate the quick reply! Agree, sure seems they have! Mines stil running your tune here however, was just curious if you ever updated but I see it's not really needed lol. Thanks again!

@@escapetarkov3838 Good to read it still holds up :D On mine I never really felt a need to tweak it more unless I wanted to mount a different kind of camera..

yep.. I do like this radio (still use it 2 years later).. Have you had the Radiomaster in hand? (I have not... but it Looked a bit cheapisch to me)

you weren't supposed to use them as diving goggles 💩

I have not seen this plane on sales-sites for years (and years) so you might be out of luck there...

I don't have this setup anymore but it seems like the bind between the radio & receiver is lost.. You need to find out how to bind the them together...

@@DutchRC they were paired. The problem is in the remote control when I connected another boat and it works

@@Frapop okee.. in that case eighter the receiver in the yacht doesn't receive power, or it's broken.

Howdy :) wel basically all their modern 2.4Ghz and 900Mhz can be used with the Tandem radio's. From looking at their site that would be the R9 MX receiver for long-range. I should add that I don't use it myself (I use Crossfire & ELRS most times)

@@DutchRC in this case what module will fit for crossfire and or ELRS? for Tandem radio?

@@eddyultra1 this video will give you some insight into what ELRS modules will work: czcams.com/video/bO5PWkJr0nU/video.html Any Crossfire module with the micro-JR interface will fit / work

Agreed! Wish it was still available.. (there's buildings there nowdays)

Hi there :) You're welcome and in this video I used a HDzero Race 2 VTX (but I used several other VTX's with this radio as well)

@@DutchRC Thank you for you reply! I have a Freestyle 2 and it not works. I'll try with the vtx you use 😁👍👍👍

comes stock with the Ender-3 S1 pro

Thank you very much sir :) highly appreciated

Thank you very much! (unless you ment I sound like a dead man ;) ) ... I get this comment from time to time..

Bascially unlimited (as with any ELRS setup).. as long as the radio & the receiver have the same Binding Phrase, it will work..

the video isn't really about one specific quad.. But.. the quad I flew in this video does not have a horizon-mode like Betaflight offers

Thank you very much 😎

nope.. but the alcohol Vapor might combust when you hold an open flame near it.. more less the same as petrol I'd say

@@DutchRC wow I really appreciate you coming back to reply to old videos, didn’t think I’d get a reply. I understand, thank you very much.

@@mado.143 No worries :D it isn't a lot of effort ;)

Thank you and good advice! For as far as I can see I would only damage the battery, but it's a good idea anyway :) Cheers & thanks for stopping by :)

@@DutchRC when happen a electrik-shock you can destroy everything what you touch with any metal.(It goes from your body to the elektronik-part you touch in this time)..i crash a smartphone with this "body elektricity",,,be careful👍🙏 Wish you a good time😊

Hmmm that is unfortunate.. Regretably I didn't run into any problem, so I can't really offer pointers.. Maybe try to contact Elefoo or their facebook page?

Hallo :) Zelfde zenders inderdaad Maar ik weet niet of Wfly voor Absima iets veranderd aan het protocol.. Dat zie je helaas wel vaak gebeuren als een fabrikant voor een anders "Label" iets produceert.. Hmmmm helaas.. ik heb nog niet iets gedaan met telemetrie met deze zender setup

@@DutchRC okay bedankt voor uw antwoord 🤙🏻

Thanks :) that's an Amax Inno 5" freestyle frame

Does the file (name) show when selecting the model to be printed? The first thing that comes to mind is the file-name (to long? spaces in the name?).. is maybe the STL part in capitals where the printer might not expect that..

@@DutchRC I managed to fix it, but now none of my models (even the buddha) will print properly. It will work for the first 3-10%, and then it just shits out a wirey mess and drags the remainders around before shitting out some more extruded filament.

@@ArandomHitman So what exactly happens? Do the first layers brake free from the printing-surface (then the print-head is probably to far above the print-place).. Or do the layers seperate? These kinds of start-up challenges are common in 3D-printing-land I will say.. but you will be able to find fixes for most any kind of problem

@@DutchRC Lets say im printing the buddha model. It prints the base first (so like 5-10% of the model) and then some filament gets stuck on the nozzle and the buddha remains are pushed aside after breaking free. It then starts repeating this process until it slowly starts crapping out filament in stringy patterns.

Good to read the video was usefull to you!

LOL :D thanks Martin! Highly appreciated

Howdy.. hmm ja dan komt er blijkbaar een vervelende vibratie bij de camera terecht.. 1ste ding zou zijn: kijken of een goede tune wat helpt, maar als het echt Extreem veel jello is moet je kijken of je de camera in rubber kunt monteren in het frame.... Welk frame heb je BTW?

Good point so thanks! I do, in these video's, do have to assume some level of knowlidge etc so it's always a compromise.. But still: thanks for the pointer! Never hurts :)

yeah I did the "recommended" setup changes but I will say: even stock it's a nice running ESC :)

Thank you! Glad it was usefull for you :)

I would then wonder if those Germen (Graupner?) brands are actually made in Germany? I'd agree that would be a factor in selecting a radio

Mostly the screen (olex and non-oled)

If it doesn't work like I showed on the video, it simply doesn't work anymore.. Parts of these motor-order and direction wizards stopped working with the latest BF versions

Yeahhhh man.. I had the same struggle until I saw what the issue was.. Good to read it helped you out!

I have flown it a good nr. of times, but don't really have a good airplane flying spot anymore regretably

Thanks! Great addition :)

not even a little bit in the same price range

Neh.. no such luck.. I sold it with a quadcopter I had it in

@@DutchRCOh! A bit of history has gone there. I have watched your video once more and seriously contemplating about putting the Eagle 3 into my coming 4" toothpick build. I am working on a canopy design, that would work with a 19 mm camera. The other contestant is the Phoenix 2 with the half inch sensor, which has also a lovely image. I might mount them with connectors and just swap them occasionally...

@@donphobos Yeah.. On the one hand, it's a shame to sell it.. but in reality I can't be TO sentimental about material things :D The newest Phoenix is a very nice cam indeed.. I have several in quads here.

Actually one of the first video's I shot with my (then new) Sony FX30 camera :D Thanks ofcourse brother! Highly appreciated and have a nice Easter weekend :)

You too ma man! :)@@DutchRC

I think you ment the Shunt Resistor (current meter) ? That is NOT a problem at all.. that positive track is connected to it "in" the board anyway :)

What 3 in 1 transmitter? This is a Tandem radio.. (tandem as in Two) and it is certainly not a multi-protocol setup. I don't really know the maximum range, but it's not 60KM.

Very different systems. The Skyroid is more aimed at autonomous systems / pixhawk use. Yes the X20 ofcourse has telemetry and can be used with Pixhawk (most any radio system can)

It's a fun and good looking plane I think :D In the Netherlands "we" are kinda always near water, but that's not true for most countries.. That might be a reason for the plane not selling well enough.. ohw and: landing on water is harder :P