Video

Hey boss can you send me what clutch did you replace it with Is it a ACT HD street?

Whwn I was in 8th grade I saw the fast n the furious movie the first 1 with the sweet black civics with them bad ass green lights underneath, i knew I had to get one someday and I did when I was in my 20s it was used n busted but I put lights under it and loved it then I crashed it. Now I’m a grown ass man n i drive a 2018 black civic si with lights underneath it and it is still a cool as the first time I saw those stupid movies that ruined my life I wouldn’t have it any other way I do it all again if I died and came back

should have supported the engine bro....

Did you also install the rear?

brooo you made this look so easy im gonna cop some boomba mounts

where did you get the red accent for the interiors?

did you have to upgrade you clutch master cylinder

Did you have to do anything special for the timing belt? I seen the white marks do things have to be lined up?

any review on the black bushing? harsh vibrations? would you daily drive it?

Did you reuse the old hardware for the lower ball joint???

Ay, bro thanks.

I wanted to see the transmission being pulled.

Great video, every other video on fog lights I've seen skipped over the wiring, but this one helped a lot.

I def. Need help installing mines. Need to link up !🙏🏼 Instagram?

When i turn the wheel it makes a creaking noise im getting these control arms but should i also get the ball joint from k tuned just to be safe

Always support the engine

Alignment afterwards?

At what mileage did the clutch started slipping?

Dang and here I am still on stock clutch at 65k miles with FBO E30 Tsp stage 2 tune. I think I might pay someone to do mines when the factory clutch goes out. Lol

Is this a stage 1 kit ?

did you say d10??? which fuse t did you use to tap into please and thank you?

bro made this look hella easy.

Bro what is that rattling sound after the install 😂

I had the dreaded nut thats supposed to be welded to the subframe where the rear control arm bolt is supposed to tighten too snap off. Was able to tighten it using vice grips and now just need to weld it back on

Brake it in by near-redlining the car lol

How long in total did it take you guys?

I just replace the transmission mount on a 2020 Toyota Corolla SE with 49k miles, the mount was completely destroy, I have to check the rear because the car has some slight vibration. The quality is really bad of those mounts for one to go with 49k miles.

Where ya located I would pay you to do this on my civic. I need a clutch it started to slip

Did you run into any issues with not having the motor supported from the top?

So I can do this job with just a 1/2" drive ratchet, 17mm and 19mm sockets?? I have a 24 inch breaker bar too.. maybe get a decent pry bar to move the engine forward on that rear mount? The instructions say I need a 17mm wrench??

how much clearance is needed to comfortably get up in there and do this? im shopping around for a new jack ik my harbor freight trolly jack isnt gonna get the job done with its 12 inches of max height lol

Is the link for the 06-11 civic si motor mounts include all the mounts ?

Nice! 🎉 you made a very detailed video demonstrating mastery of a meticulous process and great effort! That’s what’s up! 🎉

Did you sit the motor on anything?

Did u buy both bars as a set because I can't find the set on ebay only the rear.

Nice ride man

Hey dude, u still have ur stock recirculation valve?

Hi bro, i did everything as you did and now my tpms and my traction control lights are always on, did I messed up with the fuses?

What is the song name playing in the background? That sounds very relaxing

Greay vid man... Hey wsht is the torque spec for the front engine mount

thank you for sharing, this is my next project to my sI.

Love the vid man. I have a plug and play harness where I attached everything into it’s appropriate place. My button has power but my lights aren’t getting power. I don’t have a direct power wire going to my battery. My power wire from the relay plugs in under the driver dash along with a neutral (white wire) what seems to be a remote wire (blue wire) connects to the fog lights. I literally plugged everything up and have no power to the lights. What do you think I’m doing wrong. Thanks In advance.

So I have a plug and play wiring harness. Will I still have to fuse tap and connect to the battery?

Awesome work my man! I am about to take it on but will use different brand. Thank you for sharing. Your input post mod has helped. Thank you from a fellow CAli, Si driver!

Thank you very much that video help a lot

From Puerto Rico good job thank you help a lot. 👍👍👍👍

Would it work for a sedan do you think? I have 2018 lx and want to get these

Does this work on the sedan version of the 2017 lx want to install this for a new styled type r bumper so I could have fog lights.

Are those bushing poly or harden rubber?

Flutter is almost impossible with a cold air intake and no tune. You need hondata or ktuner and a short ram intake because of less resistance. No aftermarket bov or bpv is needed and no it won’t hurt your turbo. I speak from experience