Video

FYI the bontrager hub uses the dtswiss 350 inners

I feel dumber after watching this video.

I prefer my all steel professional Park work stand.

Thanks dude I’m gonna try this on mine!

This video is awesome! Thanks

If concerned about the fit i would advise putting a bit of loctite bearing fit between the splines, like others have said after the 8 bolts are tightened correctly its not a cause for concern, Sram will tell you its bad because they ultimately want you to buy their product, it will probably void your warranty using anything but SRAM parts anyway

Good content, thanks. For those of us using TPU tubes, you can't put more than a few psi into them before fitting them to the rim, and it looks like this inflator - with its slower fill rate - might be controllable enough to do that.

Got those as well. I do experience a better release performance with Shimano cleats. And with better I mean better compared to Xpedo cleats. My 18 year old Shimano XT overall perform better / safer. May I ask what shoe you use?

Will these tires be OK for specialized turbo vado 4.0?

2 minutes wasted weighing the pump and comparing its size to a TV remote? No instruction on how to prepare the valve for inflation, or how to steady the pump on the valve? Wow…

Hi. Thanks for the video. I’m trying to remove sworks crank arms. All the other videos and even user manual say to use a torx45 once you take off the 6mil bolt to loosen the crank arms off. I’m finding that the torx45 mm won’t even fit through the opening to engage the torx45? Any help would be appreciated?

Did you end up getting a test ride on this? Any thoughts?

I've seen covers like that on new boxed bikes, so I guess these should work pretty well.

I have one (2 actually, a 350 and a 370) when I reassemble the freewheel works great until I clamp it int the frame, then it is stuck and won’t freewheel. Any idea how I solve? Did I lose a part?

Hi, can you share those 3D models? I printed an airtag holder to place it under the seat.

Do these work with 6 bolt too?

I use hard tea candle wax, just take tea candle and rub it on the pedal everywhere you think shoe and cleat contact the pedal. Works a treat for me and last pretty long time on a pedal.

It's quite surprising to me that the option for internal cabling looks more like an after thought solution instead of one which is properly designed. The cluster of cables all entering the downtube at the same point is messy. Not to mention how they all then pop out and pops back in via the chainstay. Bad engineering.

Pfas FTW

Great video, you covered all the important points. I'm looking forward to the ride report. I have the Farsport Feder 35 with RD230 hubs on my light weight bike, the soke tension was also a little uneven but perfectly true, they have had zero issues and are fantastic for the money. I'm now considering these Hypers for my aero bike.

Such a dumb design! The previous addition was so much better. Why release a new product, if it’s not an improvement over the old one. Reminds me a lot of the anther stupid design-The press fit bottom bracket. How could they possibly think that would be an improvement over a threaded one.😳😳

2024 Wahoo _still_ don't show this data. I found the "Magene Utility" app shows low, med and high, it's rudimentary but better than nothing I suppose.

That's interesting, I recently measured my Sla after 9000 km and it had 0.12% elongation. Riding 99% outside, dry conditions (99%), silca hot melt, occasional top ups with UFO drip. What I managed to do is snap one of the plates while shifting above 600W numerous times (going for KOM). Didn't notice until I got home, other plate wasn't even bent. Ordered mine directly from Taiwan.

Thank you this is exactly what was wrong with mine you saved me so much time

What does the Di2 designation mean? I see there are two versions of each spec for this bike, the Di2 and the non-Di2. The Di2 looks to be significantly more expensive.

I don’t have any issues with this (or I know off) Road tires 28mm Works perfectly But following the manufacturer of my wheels and tires I had to put 60ml of sealend in it Not that low that you said Also I check my sealant every 3 months and sometimes I need to top up via the valve without issues of those black particles

3x speed play for normal conversation

well maybe it worked. I got out of the app and went back in and it said 70 percent versus the old 100 percent when it was on hex. thank you so very much

I have an apple phone and wehn I go into "battery level" to changed from Hex to Endian, Endian isnt listed. I see Ocga, binary, and UTF 8 string but not Endian I see Endianness Big and little and tried to change that, but i still dont have the battery level coming up after I hit read. any suggestions?.

how do these tires do if there is sand on asphalt?

Wow. That’s so helpful. 👌🏾

Pro tip. Make room in your life for an air compressor. Once you have one you'll wonder how you ever lived without one. Hands down the most used oower tool in my bike garage / workshop. Compressed air is also awesome for cleaning dirty mountain and gravel bikes.

Isn't it cheaper to buy an air compressor?

Do they use bearings or balls?

Does this work with the newer DUB force axs cranks

This is a pro tip. This has happened to me before with another brand booster and didn't think to leave the pump attached. I have now moved to a small air compressor.

I want to put them on my marlin 5 can i

I have a trek verve and wanted to add dome fenders for the looks more than anything else. They mainly have 2 bontrager fender types, one plastic and one alloy or metal for double the price. Are the plastic ones bad? Are the metal. Ones twice as good. Casual neighborhood ride here.

As a paraglider in my 50s I am interested..but is it readable for folk with reading glasses??

thanks for sharing! I want to go up to 42c/45c tyres. Would any Schwalbe/GravelKing tyres work with this rim? Or is it one of those Giant Hookless rims that only works with some tires?

I have had one on for less than 700km and it has started skipping having speed waxed three times I would rate my copy as garbage also may have been a fake although I bought from specialist cycle shop.

Thanks for the kind words about Nate(the junior)! He had a great time riding with yas. (He was hoping that 1 or 2 riders would’ve went with him)

I wouldn't say that I rode one of the smartest races. The smart move may have been following that 16 year old with 15 miles to go. It was a hell of a fun race. I need your goPro footage of me trying not to puke after the finish.

Cool video - seems like a mixture of self reflection and a little race marketing. Loved hearing your experience

Nice summary, keep up the good work, this style is good

I was worried about the same thing. I did a test with Cafelatex Vegetalex where I poured the sealant into a cup and drew it up with my injector. No particles remained in the cup, so I was reassured all the particles were being injected. However, that was this one type of sealant. I don’t know if this is true for Orange Seal, Stan’s , etc. I went with the Vegetalex because I was tired of cleaning sealant off frames and out of tires, and not being able to get it out of clothing. This sealant should wash up and remove easily. I am willing to sacrifice a bit of sealing power for the benefits this provides. I liked your video, it shows you are thinking about things beyond the manufacturers info. Thanks!

Did Specialized forwarded you to 4iii? Was there warranty needed?

Got to get me some Velveeta kit like that guy in the beginning

Anyone know the story of the dude that ate shit right at the start just past the timing mat?

First! 😎