Video

So is this an earlier version of the combi+? It's a manipulator, not just an autodialer, right?

That's great that you manipulated it open. Sounds like you can do it faster than your 10k manipulator machine. ;)

Beautiful safe. Curious how you know exactly where to drill. How do you even know what type of lock it has from the outside? Good video.

Sounds awesome. How much does that hardware cost?

surge protector does work and helps save your programmers

What software is recommended for management of the access cards with the PDL3000?

Ah man we wanted to see what was inside : )

The first phoenix 4.0 that I see is not on the Taylor technologies website. I began to doubt that he existed. I was working with phoenix 3.1. a friend asked me to unlock the device because the manufacturer stopped responding to emails. I was able to unlock the device, but was disappointed with its capabilities. Those locks that he opened, I can open perfectly by drilling without him, but the lock remains serviceable. And phoenix 4.0 has announced many more locks, but how effectively it works with them is unknown. Is this device really better than the black box?

Sir . How much time does it take ?

How much is the digital keypad and can it be reset? I don't want liberty safe to have the back door access to my safe.

cool collection

Was given two 1/2 ton GSA classified documents safes. One drilled lock removed. Door opens. The or he had the dial removed and punched and one hole drilled. A retired local guy came and showed my where to drill( needed to use my plasma torch on an inner hardened steel box around the lock). Got the deadbolt driven out. Opened the door(picture my huge smile) and found the body of a Mosler PRK-302. Are there othevlocks that will allow me to reuse the 4 threaded mounting locations to use a different lock?

Hes8000

Very useful information thanks again for a quality tutorial 👍

What kind of a run on sentence title is that for use in video makes no sense

you know you can push in the Led and then use a paper clip to short open that lock right? All you need is a paper clip lol!

Excellent Jeffro - Thanks for sharing

Thanks for the electric strike tutorial. I might not electrocute myself with less than 10 volts. 😂

Great video, and great info on reversing the function of that electric latch. have a great day

So.... I'm in Fl. And I was wondering???? LoL Man I get calls like that on a daily even locally and ppl don't get it sometimes I'm hand on a job and your asking me questions ont DIY fixes. There's no other way to say it. I work for a living I can't help w/out seeing it (yes that's a service call¡). Anyway great info, I'm not in the mood to drill so I'm trying to get some thoughts together on a combo not working. Cool vid.

Did you get a bigger location? Your shop looks a lot more organized. Great video.

Great video, always making the customers happy, Have a great day

Was that a tease of that ASSA key ? 😁

Where did you find this press? I’ve searched and can’t find it anywhere.

Help my lock will not lock! I have changed the battery 2 times, the door will latch but I cannot get it to latch!! HELP

SecuRam - designed in China, made in China, management is all Chinese, CEO is Chinese. The ONLY way to secure a Pro Logic is to remove it and throw it in the trash. They're junk - you can't change the recovery code from 999999 so any child molester, scum-sucking thief, rapist who claims to be a "locksmith" can enter your safe for your ex-wife, soon to be ex, disgruntled child, drunk brother in law, pedophile, drug using kid ............Thanks SecuRam for costing me money.

What scares me about automotive is the price of the tools. Seems like those I've seen, like Jay, locksny, have multiple scanners. Looks like you've already gained those resources. Thanks Jeff!

Great looking shop, and coming together. I used a manual Derex grinder when I was working apprentice at nasa. It was gold colored and on a pedestal and used the same type collet system. They've come alone way. Thanks Jeff!

My 6730 failed after 1 1/2 years. Took 40+ try's before I got it to unlock. I replaced the lock body, and decided to up things to a Group 2M 6630. Haven't disassembled the 6730 yet to see what's up. But I could tell things weren't good as I couldn't feel the 2 wheel pickup when I dialed the combo.

My 6730 failed after 1 1/2 years. Took 40+ try's before I got it to unlock. I replaced the lock body, and decided to up things to a Group 2M 6630. Haven't disassembled the 6730 yet to see what's up. But I could tell things weren't good as I couldn't feel the 2 wheel pickup when I dialed the combo.

I told my son who’s in training to be a locksmith that if he wanted to learn automotive locksmithing I’d buy the stuff I just don’t have a desire to do it myself lol. Btw, I use the heck out of that impact driver. Mostly on floor plate screws and steel door hinge screws.

All 4 of my wires ripped out do you just match the colors of the wires ?

Just subscribed. Came from Jason’s channel. The Lockforce family.

That OBD port booster and protector is useful. Years ago I hooked up my T-Code Pro to a Nissan and the T-Code started buzzing. The kid that owned the Nissan had installed some ridiculous headlights and was pushing more than 16 VDC through the electrical system of the entire car. My programmer survived the surge but I have used that booster / protector ever since then. Except when I left it in someone's vehicle, then I ordered another immediately. The kid with the Nissan couldn't figure out why he kept having to replace his car's computer module.

Cool! I have 2 dolphins that have served me well. Been through the up and downs. If you ever have a head scratcher.. LocksNY can give you my number. Guitar talk too Brutha! Good luck!

You have me on speed dial if you need anything. Its all so clean.. You sick bastard 😆

Hello Jeff, this is able we send messages back-and-forth sometimes on Jason‘s channel. I also have Xhorse stuff if I can ever be of any help to suggest things when you’re needing help, I use the super chip and the programming of them all the time I’ve used them for quite some time they’re good stuff you just have to do a little homework before you go out to do the job just so you know what you’re up against so you can know what piece of equipment will work for you the best I also have now purchased a KM 100 X, which is like what you have in one of your boxes it is a good tool also from Autel so I don’t know all the features yet that the Alltel can do but I am interested in seeing from what I have did my research on it. It is a good thing I think it will probably do pretty much anything you want to do with programming it doesn’t offer any diagnostics that’s why eventually I’m gonna go back and get the Autel. 608 pro plus that’s what I’m wanting to get. Eventually it does full diagnostics on the car and that sometimes in our field is very important but I like your video and hopefully we will see a lot more of the things that you have, and if I can ever be of any help with any of the questions with Automotive, I have been in the automotive business, the whole time that I have been in business here in Indiana and I’ve been doing it for 35 years so if I can help I would be glad to great video again keep up the good work

I almost used my big lockmaster's rig a few weeks ago. Still haven't needed it though. Got to get me one of those mag drill rigs..on the wish list. (Strong arm's been working 🤞

Excellent -- good job !! LOL on "Blue Collar" worker vrs Mega Rich dummy on Safes -- what was the problem when it "was working"? Nice estate, thanks for pics.

got around to watch the last part of the this video, after needing to find out what assa key, both Ken and Jay were talking about on Saturday Morning Live today. That is a nice clean setup. Looks good. wish I had time to sort my parts. It would make the everyday work, so much faster, knowing where everything is

That looks awesome! I love the dedicated SFIC station and the workflow key origination wall. Looks really streamlined and a time saver now that it's all set up. You mentioned stamping keys... where's that area? Also I'd be interested in an eventual video of the drill bit machine in action.

great video!

Looking excellent. Great to see the shop has a flow system now, it has enabled you to get some new equipment. Thanks for sharing, cheers

It only takes one time paying HPC a ridiculous amount for a key machine return box to realize you should never throw it away!

Shop is looking good!

Very nice, quite impressive shop layout there with great equipment. I think you need a stronger garage door to make sure to keep it yours.

Pretty slick! Thanks for sharing.

It WAY to clean Jeff !! You know I got dibs on that plastic ASSA key when the time comes 😍... Nice job

Great video Jeff I just don’t know how you do it. I have a hard time with the fact of thinking of being on videos I thought about doing it but I just don’t know how to get started with it. I’ve never been a person to want to be in front of the camera I think I have a lot of knowledge to share, but I just hate being in front of a camera. But you are a real pro at it.

מנעולי כספות כלי פתיחה מנעולי כספות קומבינציות