Video

Just because you were asking, 😉 Panhard-Levassor was one of the earliest car makers, and Rene Panhard invented that bar or rod to stabilise their own vehicle's suspension way back in the 1920s! A genius move for sure! And here's a car they were selling right before WW2 happened, en.wikipedia.org/wiki/Panhard_et_Levassor_Dynamic#/media/File:Panhard_Et_Levassor.jpg Crazy but cool right?

Very detailed and informative. Thanks a lot

Is there an oring on the axle shaft in the rear? Inside the cup in the center and the inside the differential cup at the other end.

Nice!! Will injora wheels 1.9 fit injora tires size 120mm by 45mm 1.9?

I tried to swap axle hubs but they are notched to stop them from rotating. How did you put the left on the right and vice versa?

Mine came with this axle with a trx4 2 speed transmission and 3 link set up?.. the top link is on the passenger side. Would the geometry still work for mine? Thank for this video.

Nice👍🏾

That looks great man. Mouted one of these on a HPI Crawler King, it looked much better than the older stock lexan Ford bronco body.

Love it other than the short bed. I do like short wides for rods but for some reason the long beds look better for 4x4's like thr fall guys gmc grande. I want to greenlight 1:18 version to add to my collection. Should check it out, loved the show as a 10 year old & love it today as well. Wish they'd release the last 4 seasons..

They increased the price of this chassis. I got mine for $150. Basically following your build of the chassis. Doing the track bar setup like you did.

Just got my first 1/10 scale. scx10.2 and it came with this body (in Orange). Previous owner cut out the entire interior to accommodate the 10.2 transmission. I am currently dealing with tire rub, and facing the need to bring the front axle forward. Thank you for your informational video! Any help on how to bring that axle forward is appreciated.

Hi, I just watched your video on your truck it’s January 2024. I was just wondering what you used for the silver where your paint lines meet by the way the truck looks great.

Does the length of panhard & steerinh link are necessarily the same length?

Running video? Let's see it in action. Awesome idea! Nice ford body. Where did you get that?

Just got mine in the mail today and looked in the box they included all the metal upgrade parts for planetary and transfercase just wanted to make a little update for those checking this video out

Great build would you have or be able to make a video of it crawling and flexing?

You have made alot of great builds.

Would you be able to or have you made a running video of it. I have fallen in love with the build. Amazing Jeep build.

so im running 110mm shocks on the same clone chassis in the video would i need to use a 110mm track bar, i did all the same things you did step by step

Is it as simple as switching the hubs from one side to the other, or did you need a new passenger side hub? I thought I heard "switch"....(I'm a noob). Also, did you make the 95mm track arm or purchase it? BTW, I have zero clue as to what I am doing. I can't even tell you very much about F150 FX4 truck.

I did a simple bump steer delete on it. Just mount the servo below the usual mount. No extras needed just screw it in under where you normally would on the same mount and that completely fixed it for me. The servo is a lil bit more visible but i run scale rigs so my standards for that are pretty high and it looks fine.

For anyone interested in buying these. Yes, they are worth it. Only horrible thing on it are the stock shocks but otherwise thryve worked great. Never missed a beat. People treat crawler transmissions as if thry are 8s xmaxx transmissions. Hell most run just a small brushed motor. It isnt going to strip. And i have extremely heavy rigs as all the bodies are 3d printed with functioning canopies and all to the point where they make the stock stiff shocks too soft on full compression. People shit on them purely because of the price. And if a part breaks, just chuck a scx10 version in and give it a upgrade. The crawling community has become way too snobby

4 years later the housings are still available, but now 20$........ bummer

I just bought this truck and the really cheap and it was all brand new still in the box with all the extras to make it a having a hard time deciding if that's what I want to do or not I really wish they made an extension piece to make the cat for the Blazer into a bed cap for the truck

this body is compatible in traxxas trx 4 sport ?? sorry my ingles

Nice rig!!

What front links sizes did you use? Great job btw!

Hey there, fantastic work, I bumped into your vids as I am using the same body / chassis to build a Fall Guy truck. I haven't got the chassis yet but was wondering if it was easily extendable to a 13.1 or even 13.9 wheelbase? Also, would love to see your progress !

Anyone have a link for that front axle? Will it work with a stock SCX10II?

Hi. Your G Wagen looks great! I’m planning to put 1.55 wheels on my CC-02. Do you think using wider wheel hubs would provide clearance for the wheels negating the need to file/grind down the suspension screws?

can you pls provide more detail on the magnetic body mount? im just building mine and could use some tips on how to achieve!! thanks

I have on bran new in the box never put together

Those wheels look great!!! That entire build looks beautiful

I have the Injora Clone, with the motor in the front. I shortened and longer steering and panhard link, but it steer a little bit when the shocks are fully extend. I also longer the upper link by 2mm and the lower ones by 5mm to get my clearance and wheelbase. Does this effect anything? I'm a little bit confused. Does the position of the servo effect anything? I was forced to put him further back, maybe 5mm.

I just got it too use in the creeks so we will see how she goes 200aud from ail Express, the axial kit version is 500aud crazy I know !

Just saw the video I like it I think the exhaust Stacks are cool you're right about the wheels though I've bought aluminum ones👍🏆

What do you use for bigger exhaust stacks?

If problems are you need different motor. You need Tamiya Item 54114 CR- Tuned Motor ( 35T ) If will give you low-speeds. And more torque Tamiya remand this motor for up grade

Would love to see a video of this mounted. Looking g😊old

The jeep “Brute” by American expedition vehicles is the real life version. Also, I have an Scx10 chassis with injora portal axles and the wheelbase is too short. Is it fairly easy to extend the wheelbase to make this work? It looks like I’ll have to move the rear shock towers back further as well

what size upper and lower links did you use ?

Have you gone thru how you mount the bed. The only thing I’m not sure of. Great truck and great vids. Watched the show all the time.

I’m not sure how the bed mounts?

I love CA glue I huff it brah 👍

Great looking truck! Also enjoyed your explanation of the build and the parts, much appreciated. First of this brand I have seen built up. I have seen the kit in box over at SBG if I remember correctly and RC Everyday's if I am not mistaken. Anyhow, thank you very much for the upload, it is cool to learn more from the experienced rc truck builder. Cheers :)

I used the K44 axles from rc4wd on mine with the 7mm extensions. They're the closest to scale and the real looking axels I could find. I love your mounting solution. I also put my electronics under the hood.

I have the painted body. I wish there was paint that matched the teal, yellow, orange or blue painted body. Im going to end up using polished aluminum to cover the rockers like they did back in the 1970s. I guess it will be period anyway.

I just bought these of Amazon. Hope they work well on my TRX -4.

IF YOU MIX BAKING SODA WITH THE ca GLUE IT WILL DRI ALMOST INSTANTLY AN ROCK HARD AN WORKS AS A BODY FILLER ALSO

my front axels pop out regularly ... can't find anything loose. Any ideas?