Video

So sweet. I love MS

How do they look at night video, please

The music isn’t need, I’d rather hear ya talk. Good video though.

What carburetor did you end up using? I have a 1980 F150 with the 300 straight 6 as well

I had to replace the hole control stick because it broke and I thought this was useful for taking apart

Ty!

I've got a '97 XJ that just recently had a similar issue with over an inch of water on the passenger side floorboard after a lot of rain. Wondering if it's set up similar to where I can access it after removing the cover? I watched a nightmarish video of a guy cutting open his cowl to gain access to the fresh air intake. Mine is the first year of the "restyle" so maybe they redesigned it for '97?

Thanks yall!!! Worked perfectly!!!! EHHHHHHGG

Recently put an Agility radiator in a 98 ram and it immediately started mixing trans fluid and coolant together. Turned an easy job into a bigger job and big mess. Just pay the extra $40 for a quality brand radiator (like Denso) and save yourself rolling the dice on a huge headache.

Yup I have that exact issue ,,2017 ram rebel...thank you buddy

Found inch and a quarter ID hose in home depot did the fix works well thanks you much I actually canceled the new washer I was going to buy tried this saved me 600 bucks

putting any money into a dana30 is a mistake. RE lift , whyyyyyyy?

Thanks brother

Can that drain be removed to clean really well?

what ended up being the issue?

Jeep is looking great! Keep up with projects for it too!!!

Thanks for this video!

Thank you for the info.

I have an rk24h which has the same motor and it’s essentially the same tractor. Using it as lightly as I would use a tractor of this size…I accidentally pushed a SMALL limb through the plastic “mesh” on the grill and into the fan…it ain’t hard Also the plastic threads on the hood on the unsupported side have cracked

Thanks so much for doing this & mentioning the T30 bit. I just fixed mine. Clearly someone had been in there before, the small round white connector to the camera was a little chewed up. Removed & sprayed it with Deoxit5 & replaced it. Camera fixed. Could not get the larger connector apart but didn't need to.

Get a C3 vette. I just bought a 74 convertible with the factory hard top. Beautiful Car, most everything is easy to work and not expensive except interior parts. It's my second one. Had a 77 a few years ago. Good luck and thanks for the video.

Thanks. Of course, I do have a 97.

Can't get the axle pin removed from the bearing. Advice?

Get what you pay for, but everything has its purpose. Common sense doesn't seem to be common anymore.

Doesn't work , the bushing that the springs sit in degrades....thats the real problem..

Thanks so much for this video!

98 tj. All lights are LED. This worked perfectly. Thank you.

You have the Sahara model, you should not need the 8.8 it has the dana 44 rear differential....

Good videos Is the electric locker wiring you used in the link have two plugs on the end In the video you talk about it but the harness in your link seems to only have one I am gearing up to put 08 rubicon housings under my g/fs 2013 Sahara and saw this video Also am I buying two harness one for the back and one for the front I take it you did not hook up the part that makes the light come on the dash is that what I am missing with the housing having 2 plugs but harness has one

Thanks for sharing

thank you for this.

I've asked for the VIN on marketplace so I can look at the build sheet. You'd think I was asking for their bank PIN for goodness sake.

Looks great!

Are those C5 seats in your C4? I just got a nice set of C5 seats to replace my destroyed C4 seats. I just have to fabricate some kind of adapters probably. Do you have a video about that? That would be amazing if you do!!

She’s a keeper!

Is that Leroy 3.0?

Got some nice metalcloak parts with the new axels.

I'm hoping this is the issue I'm having with wet passenger side floor during rain. Thanks for taking the time to make the video.

How do you get the pin out if it broke past the threads

How did you wire in lockers? Have almost an identical jeep just a '13

I could really use your help. I am struggling with my 1990 ZR-1. My car already had an aftermarket alpine stereo with a 4 channel amp and subwoofer etc. I tried replacing the old aftermarket head unit with a Pioneer bluetooth one. I joined the wires and it fired right up. Sadly however, before I taped my connections the wires probably moved and touched one another and suddenly the radio stopped working. The radio itself is fine. I tested it with 12v external power. I checked the fuses on the passenger door and all seemed fine.

Thanks broseph. I have same jeep

How did you use the old transmission lines with the new? Which part do I take off the new one to put the old on

you have a video on re installing it . i want to see how you pushed the piston back in there without taking of the whole thing

bro you don’t know how much time you save me . i have a locked motor and cudnt take the expansion pipe off i thought i had to take the screws on the bottom. but i just wiggle it and it’s off

When did the Metra kit come into play???

Great tip, I just did it to my TJ a few minutes ago, thanks ! worked like a charm

About how long does the gator drive for until needing a recharge?

You have absolutely no years on here as to what this video refers to. I have a 2000 TJ in my flasher relay is on top of the steering column. It would be very wise if you referred to the years for which you are making a video for.

I'm looking to do exactly this on my kids Gator. Did you add a soft start module? If not did it strip the gears after some time of use?