Video

Nice man, thank you

Part of nature and the ecosystem. Has to be a way to redirect, or over grow something .

Just bought one it arrives Sunday 😊

Thanks...for thst info..👍👍

Thank You!!! I have same model -- just tried your recommendation and it works. For others: don't give up... I had to add more CLR to the soap dispenser and continue to run the washer. After about 3 to 5 minutes, it started spitting and eventually back to the strong power wash.

I turn mine on and it doesn't do anything the power button is on the light is on any idea I bought it last year and I haven't used it

This worked after I gave the pump a couple of light taps with a small dead blow. Left the CLR in overnight.

I have the same problem on the same model and I worked the same way , but didn’t solve my problem and still has no pressure . Is there any other solution?

Where can I find that filter I have the same one but seems the filter is missing

I’m looking at one now for a friend, same symptom Wondering if I should pull the pump and check the springs and check valves I took one apart years ago and vaguely recall small springs and nylon discs/ plungers They may all be oxidized with hard water and siezed up CLR is worth a try along with 60 # h2o # behind it later on

No its not worth it. Tractor is light and will easily tip over. Too narrow even on flat ground. Accessories are so over-priced. I should have bought a used tractor with loader.

Thanks for posting.

I have same bike no rear suspension and ur right its a big solid minibike u dont want goin faster than 30... i got mine to 43mph stock engine did a little govenor adjustment and popped off all the throttle restrictions thats fast enough

Doing this tomorrow!!! I hope it works! I already cut off the GFCI plug and it’s blowing breakers when it plugged in.

Very easy to strip the threads on the front drain plug. I learned the hard way!

Will try this I have the same issue with the same model

What type of fuel does these take

Are u kidding me, you can’t film digging up a dead mole. 😳

I swear these fucking auto engineers put shit in the most fucked up places on purpose!

The new plug worked for us for one season, then the plucker crapped out again. Tried replacing the capacitor but so far no luck. We have 36 chickens to process next week and probably going to hand-pluck😩

Nice.

What state are you in

Sweet rig. That and the BX should cover most anyone’s needs.

Also, I have another question. You showed those larger rounds that you cut, and mentioned that is the biggest you'd want to cut with the saw. Do you think the 14" bar version would perform similarly for that size cut? Thanks!!

Hi, at 3:40 you're cutting a maybe 8" log. How many of those cuts do you think you could get with a set of your 5aH batteries?

This is actually pretty cool and will make having geese way more enjoyable. It ticks off all of the things that are important to me like ventilation, easy cleaning, nighttime protection, easy to move/lightweight.

I want one of these.I had the money for like a week ago and I end up purchasing something else and tell after my trip to see my kids.Just in case I fell off the d*** thing, I wouldn't ruin the trip.But I will still get one of tyes

Your 🐔 🐓 are beautiful.well taken care of. The 🐓 is a good size

Pretty birds!

I got a crapsman D.L.S limited edition what ever right the thing is they put a plastic round cap built in to the seat witch doesn't work very good they just keep making stuff crappy an comitcadit

Not a good idea to disable the safety. If you were to tip the thing over with the PTO engaged the blades will not stop spinning.

Forever? For ever and ever? Or just those particular moles. The dead ones? Because your lawn can be re-colonized any time.

When you change that oil filter loosen the filter and place a piece of aluminum foil under it and wrap it around the side to keep the spillage on the foil and off the mower. Just a tip in case you want to try it. They also make these lead things that can be folded and manipulated to do a similar thing. Good video.

I got a b200r. It’s nice I got it for 750 on sale. It’s decent off road but without that rear suspension that thang clunks alll over the place when you stand up and take a bump or two. Thing damn near wants to do a stoppie😂😂

Looking to get one of these and heavily mod it. New engine and such. Red beard garage said it was too low. What do you think?

Where does the small oring go that comes with this oil filters?

Did you ever make a video of you snow blowing over the millings? How did they hold up? I want to do millings, but afraid of what the harsh midwest winters will do to the millings.

How do you winter them. I live in Minnesota and thinking about getting ducks

Outstanding job. Very clear instructions. I’m using a torque wrench for the first few to get used to it but yeah basically snug and stop is what the torque wrench had me do.

I found a guy taking up a bunch of concrete, he was going to have to pay to get rid of it, he ended uo bring it to me, He told me it was 180k pounds od concrete, while most of it did not have wire there was some that did, and it was a pain, ended up renting a jack hammer for it, but the regular concrete was broken down into manageable pieces with a 12# sledge hammer, I'm filling a hole that the previous land owner dug out it measured roughly 40' X 60' deep, dug into a hillside and went from ground level to 8-10' ft deep at the back😬, I been using all kinds of fill, quite the job, I like the way your drive turned out, thinking of using Crushed concrete here on my drive for base, but really liking the asphalt millings for topping it off👍

Thanks for this video!!!

I think something is digging as I have noticed dirt all over a once grass area😊

Your suppose to wet sand it smith first then cut and polish it.

the gopher hawk works alot better

I didn't see you actually use that tool to remove the filter. I'd like to see that. Plx lmk what the name of that tool is so I can get one. ty

Does your Kodiak run hot at low speeds?

What about predators? Perhaps it would keep coyotes or fox out but what about rodents and raccoon?

Watching you stick your finger thru pin holes give me the willys. Dont shake hands with danger 😂

Great design. How many birds fit in there?

This is a very silly question but also my first time doing a touch up: how badly is the quality of the paint affected if I apply the clear coat first, then the paint itself?