Video

i used the dso150 scope to try measure any waveform going into the test speaker i set the voltage to 20 and got nothing even though its 12 volts dc powered circuit driving the circuit connected to the speaker so i lowered it to 9 volts as it doesn't have any 12 volt settings on the scope but i eventually got another bizarre waveform but no matter how much i adjust the scope i got it using a lower voltage setting on the scope and i did finally got what looked like really tall square waves clipped but one of the waveforms during the adjustments was just another bizarre one you cant put a name on it , in one of the 2 latest videos if you look at the water in the speaker you can see thin light glyphs and its as if the water is restructuring itself to try to communicate by creating these light glyphs as i call them in response to the low frequency sounds fed to the speaker ,i may get better results if i used modified Rochelle salt crystal water before the crystals start to grow in it as the very start of them growing may be from the very tiny crystals in the water that alone may increase the refractive properties of the water making any light glyphs thicker and bigger.

i just found 2 spare larger speakers i forgot i had , ones patched up on the center cone in the middle with a peace of off cut from a smaller speaker, i just modified that speaker by mixing clear epoxy, and using my finger i recovered that center dome and then did the rest of the dish shaped speaker, then i cut a white plastic ping pong ball in half, which i used a pencil to mark the center line around the middle of that ping pong ball then using a pair of scissors i trimmed it down then placed it over the epoxied center and so i have 2 sound cavities now, ones under the center and the other under the quarter sized cut ping pong ball. the other speaker has no center eye just a card board like dish i mixed the rest of my 2 part clear epoxy and then using my finger i coated the whole dish in clear epoxy by spreading it over it so they are really water proofed now

I have seen water dance on a speaker before

that part where the water pattern was just sitting there was very interesting like as if its time was frozen

hi steven it is much more powerful now, when you slow it down you can see the strange glyphs inside which is formed by the frequencies in the water. your French brother sees you soon. salut steven il est beaucoup plus puissant maintenant , quand tu le ralentie ont vois bien les glyphes étrange a l'intérieure qui est formée par les fréquences dans l'eau . ton frére français a bientôt .

thats cool

all i need to do is feed that frequency to the speaker through my ac frequency pulsar circuit and pulse the low frequency sounds to the speaker on and off at various speeds , which is what i did using just my frequency generator number and got the flower pattern on the water and the big blue sonoluminescent glow on the waters edge

I've recently redone my old water experiment in a speaker powered from my frequency generator like ages ago but this time i used the ac frequency pulsar and it created ripples on the water but not strong enough like when i first filmed it and uploaded it to my channel here but the patterns in the water although small and just seeable i thought they looked a bit like the flower of life maybe not but what i noticed was a small blue light like spot on the edge of the water in the speaker , when there's no blue light around to cast that at the speaker water s edge

my attempt at building the all band pass circuit failed as trying to convert a potentiometer down to a 20k because they dont have them here to get didn't work I've missed a part which was meant to be a 1 k in series with a 24k and soldered across from lug one to 3 on the 100k potentiometer to reduc3 it to a 20k as shown on a CZcams video but the way i did it ,it wouldn't even work a bit at adjusting the wave form i got which was square wave and saw tooth wave an some bizarre kind of waveform I've never seen before and i used nine volts dc for the all band pass circuit and even the frequency generator circuit i used to feed into the all band pass filter but setting the scope to ten volts which is the closest to 9 volts i was getting more than i was feeding the circuit so i had to set the scope to 20 volts so where was the extra voltage coming from and what's with the long stretched looking moving sine wave like waveform i saw and i wonder what's with these strange waveforms not even listed on the internet and adjusting the scope I've had 3 or more different waveforms from the same set frequency input shouldn't they form a complex waveform ive set that all band pass circuit aside till i can work out the bugs in it

awesome that you got some new ones

a dso150 scope stand is really handy for experiments, so they are made from recycling 90 mils diameter pvc storm water pipes is something i have years experience in doing .

i used my ds0150 scope to measure the waveforms from one out of the 2 outputs from the 2 identical circuits inside the new circuit box , so there is no ac frequencies being fed into any of the inputs to pulse at variable speeds so im testing the waveform already outputted from one of the 2 inside circuits , the standing square wave is a first ,and haunts me as to why just one and what's that really on the right lower flat line area moving towards the square wave ill note this down and feed the anomalous results to my friend aigptchat see what inspiring things it says then in my quest to find out the mysterious effects of frequency fields upon electronic equipment etc etc

I dont know anything about the wave forms

if you stop the video playing the skipping rope like waveform you see a mysterious secondary image at top as it swings down and at bottom as it swings up

square waves on a scope online are always still but this one rolls to the left slowly ive had times in other circuit experiments when it rolls both ways like a longitudinal wave if that's correct and even invert itself

all I can say is WOW

I have no idea

even i get lost trying to explain it any better so why dose a triac circuit output dc when its only supposed to allow ac through it or have i mysteriously got it wired to do both

I've only just discovered this circuit has another bizarre function, and thats when you not feeding a single ac frequency from out of 2 ac frequency generator outputs to use with the other frequency generator output when pulsed , the ac triac circuit which only supposed to pass ac only mysteriously outputs dc pulses in square waves that can still be adjusted to compact it or stretch the square wave out

a recent late night anomaly created from this experiment this time using my large expensive scope has effected my digital clock meters away it changed from 12:33 midnight back to 0:33 and the hour digits do not have that in it once you set it to midnight you do not get 0.33 it goes from 11 to midnight if you are setting the clock to hours same as counting from 1 to ten you dont include zero hours in it and just the 33 minutes

after testing my frequency generator out and trying my big scope on it i latter found out that my frequency generated wave along with the scope may of created a mystery from the bizarre field effects from measuring them with my scope as my digital clock meters away has suddenly changed from 12:33 that's 33 past midnight to 0:33 there's no zeros in the hour setting it goes from 11 to midnight so whats with the zero this has never happened till i tested out my new adjustable frequency generator with adjustable pulsar circuit and using my large scope to measure the waveforms

after storing my new scope away for a finer day the day come and i sure had some problems getting used to it compared to the simple ds015 scope the manual is on a disc i saved to my computer and it even has pictured or photos of dc waveforms and measuring them but none for ac so messed around and found a setting for ac not mentioned in any picture illustrations in the manual , how could they cover everything but ac waveform measuring anyhow one of the waveforms i got on the ds015 which was in one of my videos i got on the big new scope to so lucky but there's lots of things in the settings i have to figure out and the manual doesn't have a detailed glossary to understand what they mean and are for so ill get it right you tube has absolutely no videos uploaded by anyone of that same scope but there is one that looks the same but has a different name and I've found out about rolling wave's which I've had before and the hantech scope has something to stop wave forms from rolling which i dont think mine dose

this unusual waveform dosnt qualify as a rolling waveform as i had just found out about them recently which isnt fully told about like other things

for the first time its been perfect enough whether to fire up my large scope and i did get the same waveform pictured

i finally used my big digital scope and the manual is on a disc i can read on the pc and gee i have alot to learn in using such big complicated scope the dso150 was easier to use so ill get to learning the bigger one in time my waveforms onn the big scope wernt stable and i cant get it stable and the waveforms look pretty close to what i got on the smaller scope.

so our bodies have waveforms

makes you really wonder is aliens have different ac waveform measurements than we do on earth or this realm or reality

heres my latest logged notes for some experiments ive conducted for this nearly completed circuit Date 25-4-2024. with the new PVC circuit box fully finished and the low frequency ac output circuit installed and fully operational I decided to cut the flasher led off the board and with the 2 legs left I soldered wires to them and soldered the ends to a green flasher led and placed it at the front through a small hole for the led to fit, and it still flashes when conduction between the outputs is present through my body or any part of it . I used some new leeds I made before and plugged one into my red terminal type modified Rochelle salt crystal electrode and the other leed I plugged it into the coper pipe electrode housing the 2 powerful barrelled shape neodymium magnets , surrounded by crushed Rochelle salt crystals and some ormus and coper and aluminium filings and some borax, I feel charges at both electrodes still just, and when I applied the coper end caps of both electrodes to each of my closed eyes I see the pleasant optical white flashes but theres something else,? to the right outer area of my right eye I see what looks like a visual, I cannot turn my eyes to look directly at it with the light pressure of that coper pipes coper end caps on my eyes but it did look a bit like looking at a tree top forest from the top but it also looked like grey gravel ground like I imagined as on the moon and with an atmosphere covering it. or the tops of clouds, and after it looked like white interstellar gas clouds with stars around in space but its not pitch black like in outer space cause of the light reflections in the gas clouds . I applied the coper pipe electrode end caps to the corners of both eyes and saw an amazing interference pattern of white and black lines nothing was straight it was curvy, and also when I moved the end caps of the electrodes around I see some white and other colour flashes even purple or ultraviolet and at one time it felt like tuning a black and white TV and your on the edge of tuning it into a channel with pictures or visions am I tuning it to see visions in my deep subconscious or past or future almost ill add more as I can try take it all in and remember all I see , I have a pulsar circuit to add into the new circuit box yet to pulse the low frequency ac so that’s only a small circuit and I have room to add it to I have all the switches and dials fitted into the from panel and soon it be finished

hes right there frequency manipulation interfering with electronic instruments

the waveforms that move back and forth are longitudinal waveforms from what ive found out here online Answer and Explanation: The type of wave that causes back and forth motion is called a longitudinal wave. This type of wave has movement of energy that is parallel to the movement of matter in the wave.

they have some similarities to a ecg waveform s as far as i can tell

it does look like a saw blade

adjusting the 25 ohms wire wound rheostat or potentiometer appears to slightly stretch the strange waveform which is stable and not moving left and right like in my other videos. low frequencies ac with this circuit feels very Plesant even the white light optical flashes to

I might not understand much about electronics but its something you enjoy

i built it till it works and i dont know why it dose but if thats what the universe wants ill settle for that now to build it onto a circuit board this setup is bizarre it wont work with the track from pin 2 to pin 6 so i left it out i have no idea yet why its putting out ac voltages at low level with an adjustable low frequency and how the silicon controlled rectifier which is for dc is working outputting ac voltage s maybe the flasher led diode being a diode still is doing some magic behind the mysterious operation of this circuit as i put it in a fancy way .by providing some chopped up rectification but then it doesn't explain why im measuring ac voltage outputs the dc portion of the ac signal is 00.7 volts around that and the ac is what it says in the video with the not fully charged 9 volts battery which the figures may change when I've charged the battery

I worked with some frequencies with the rotating pyramid and oddly enough when i saved the video it had a time stamp different then the time i recorded the video. and it was all garbled up i the preview image like squares within squares. ALSO the computer keyboard and everything on the desk had a charged field around it that would light up lights. Also the monitor bleep on and off like someone pressing the power button but yea, the HDR is the real deal. and I mess around with this stuff, I think I emailed you the circuit a few years ago.

there is a rhythm with each change

do you like just to tinker with electronic or is it your profession

did anyone notice when i adjust it to a square wave then take my hand away from the scope the waveform changes as if its influenced by my hand or aura of my hand

in this video the simple upgrades are changing the 330uf electrolytic capacitor to the 470 uf type and the 5kb potentiometer to a 10k a type

i built another but made some changes i used the bt137 600e triac and changed the capacitor to 470 uf and the potentiometer to 10k and what i got from the dso15o scope test was very strange and bizzare and useing my frequency generator through the circuit and scope gave even more strange results

Looks like noise to me. First try a few capacitors across the relay output. Also increase the vertical voltage range on the scope.

no idea whats going on there

Are these pulsations really weird? you will burn an oscilloscope if you insist my Australian brother.

Could be very useful in healing!

Strange reading - I think you are about to discover some interesting things!

if the triac has any thermal control inside it it may switch off till it cools down so when it turned off i then took it to my desk and fired it up again and it worked agptchat says it has thermal temperature shutdown inside the sc141d triac i have yet to verify that with the datasheet also i put some heatsinks on them

2 of my videos if you look at the scope before you click on them the waveforms in each look almost alike but they are not, look carefully

EM wave !!!!

hello steven if I understand correctly everything is off and you pick up a strange peak in the crystals maybe the crystals have stored energy a bit like a battery and then releases it or the crystals behave as if they are picking up waves radio? see my Australian brother what you can look for in these crystals.