latest experiment low amplified pulsed frequency , water restructuring.

this was originally a 12 vols dc power jaycar electronics preamp with amplifier, kit the same one used in my ghost boxes but im powering it with a 12 volts dc 1.5 amps plug in power supply instead and i was going to test it using signals fed from my frequency generator but i found it was already outputting low frequency without any input and i can turn the volume up very loud so much the water jumps up so high and goes everywhere on the kitchen benchtop, so if the speaker is motor boating or not its perfect and exactly what i wanted to alter the crystalline structure of water with low frequencies between 200 and 3 hundred hertz and experiment i did before which i shot only a short video of it and used just my frequency generator number 4 linked to the speaker and using my ac frequency pulsar circuit i got a flower pattern on the water so if thats also classed as the flower of life its only one flower only but the bizarre part was a blue glow on the edge of the water in the speaker which if it is the biggest sonoluminescent glow I've ever seen and it was blue

[@stevenchiverton48]

that part where the water pattern was just sitting there was very interesting like as if its time was frozen

[@kimfitzgeraldrockfam8973]

thats cool

[@stevenchiverton48]

thanks kim maybe i can get more out of restructuring water than possible

[@davedede5516]

hi steven it is much more powerful now, when you slow it down you can see the strange glyphs inside which is formed by the frequencies in the water. your French brother sees you soon. salut steven il est beaucoup plus puissant maintenant , quand tu le ralentie ont vois bien les glyphes étrange a l'intérieure qui est formée par les fréquences dans l'eau . ton frére français a bientôt .

[@stevenchiverton48]

wait till i test run it through the pulsar circuit dave

[@stevenchiverton48]

i used the dso150 scope to try measure any waveform going into the test speaker i set the voltage to 20 and got nothing even though its 12 volts dc powered circuit driving the circuit connected to the speaker so i lowered it to 9 volts as it doesn't have any 12 volt settings on the scope but i eventually got another bizarre waveform but no matter how much i adjust the scope i got it using a lower voltage setting on the scope and i did finally got what looked like really tall square waves clipped but one of the waveforms during the adjustments was just another bizarre one you cant put a name on it , in one of the 2 latest videos if you look at the water in the speaker you can see thin light glyphs and its as if the water is restructuring itself to try to communicate by creating these light glyphs as i call them in response to the low frequency sounds fed to the speaker ,i may get better results if i used modified Rochelle salt crystal water before the crystals start to grow in it as the very start of them growing may be from the very tiny crystals in the water that alone may increase the refractive properties of the water making any light glyphs thicker and bigger.

[@stevenchiverton48]

all i need to do is feed that frequency to the speaker through my ac frequency pulsar circuit and pulse the low frequency sounds to the speaker on and off at various speeds , which is what i did using just my frequency generator number and got the flower pattern on the water and the big blue sonoluminescent glow on the waters edge