- 158
- 4 008 686
Global Electronic Services
United States
Registrace 12. 07. 2012
Global Electronic Services repairs industrial electronics, motors and hydraulics for some of the largest and most advanced manufacturers and distributors across the world. We also sell new and refurbished equipment and parts.
The Global Advantage allows your facilities to eliminate downtime by reducing the cost of doing business and the obstacles that historically have been seen by the MRO(Maintenance Repair and Operation) sales and repair industry. Global Electronic Services reduces long turnaround times, eliminates poor communication, does not use multiple outsourcing and replaces the high mark up and low value of our competitors with our single source system to provide maximum speed and value to our customers. We are experts in the repair and sales of industrial electronics, motors and hydraulics. We remain at the forefront of the newest technology and OEM training.
Want a quote for a repair? Give us a call at 877-249-1701. Our team is available 24/7!
The Global Advantage allows your facilities to eliminate downtime by reducing the cost of doing business and the obstacles that historically have been seen by the MRO(Maintenance Repair and Operation) sales and repair industry. Global Electronic Services reduces long turnaround times, eliminates poor communication, does not use multiple outsourcing and replaces the high mark up and low value of our competitors with our single source system to provide maximum speed and value to our customers. We are experts in the repair and sales of industrial electronics, motors and hydraulics. We remain at the forefront of the newest technology and OEM training.
Want a quote for a repair? Give us a call at 877-249-1701. Our team is available 24/7!
Centrifugal Pump Before + After
Scot Centrifugal Pumps are workhorses designed for industrial applications, irrigation, and even your boat. They use centrifugal force to move liquids by spinning an impeller, making them efficient for transferring large volumes of water.
Global Electronic Services is the industry leader in repair, service and sales of industrial safety equipment and all Industrial Electronics, Servo Motors, Motors, Hydraulics and Pneumatics. Whether we are serving customers with an electric motor rebuild, circuit board repair, servo drive repair, or hydraulic pump repair we ensure all services are done correctly the first time, with all work completed by our experienced technicians at our state-of-the-art facilities.
That's how we are able to offer The Global Advantage!
10% Price Guarantee
18 Month In-Service Warranty
1-5 Day Standard Turnaround
FREE 1-2 Day Rush Service
Free Evaluations
Visit our website www.gesrepair.com
Call us at 1-877-249-1701
Don't forget to subscribe to our channel for more videos!
Global Electronic Services is the industry leader in repair, service and sales of industrial safety equipment and all Industrial Electronics, Servo Motors, Motors, Hydraulics and Pneumatics. Whether we are serving customers with an electric motor rebuild, circuit board repair, servo drive repair, or hydraulic pump repair we ensure all services are done correctly the first time, with all work completed by our experienced technicians at our state-of-the-art facilities.
That's how we are able to offer The Global Advantage!
10% Price Guarantee
18 Month In-Service Warranty
1-5 Day Standard Turnaround
FREE 1-2 Day Rush Service
Free Evaluations
Visit our website www.gesrepair.com
Call us at 1-877-249-1701
Don't forget to subscribe to our channel for more videos!
zhlédnutí: 64
Video
PowerFlex 755 Variable Frequency Drive (VFD) Repair
zhlédnutí 154Před měsícem
In this video we repair a PowerFlex 755 Variable Frequency Drive (VFD) which provides high-performance AC motor control for a wide range of applications. This easy-to-use drive offers flexible control options, embedded safety features, and seamless network integration. It optimizes machine performance with features like sensorless vector control and built-in diagnostics. Global Electronic Servi...
Fixing a Chattering Contactor
zhlédnutí 129Před měsícem
Is your industrial controller making a racket? This video tackles the issues of chattering industrial controllers, diagnosing the cause, and showing you how to fix it for smoother operations. These include things, such as industrial controller chatter, PLC noise reduction, industrial motor control applications, and industrial automation troubleshooting. In this video, we will cover: - The funct...
STI PA4600 Perimeter Access Unit Functional Test
zhlédnutí 78Před měsícem
Our technician walks us through an Omron STI PA4600 perimeter access functional test. Through a series of checks and repair, we will confirm the safety light curtain is operating correctly. Omron's STI PA4600 [a discontinued product] is a long-range (up to 70m) safety light curtain ideal for machine safety applications. Its multi-beam design (1-6 beams) creates an invisible protective zone that...
Replacing PanelView 550 Touch Screen
zhlédnutí 213Před 2 měsíci
In this video, one of our technicians walks us through the process of replacing a PanelView 550 Touch Screen. We hope you find this video informative and helpful. Global Electronic Services is the industry leader in repair, service and sales of all Industrial Electronics, Servo Motors, Motors, Hydraulics and Pneumatics. Whether we are serving customers with an electric motor rebuild, circuit bo...
Diagnosing A Valve Control
zhlédnutí 241Před 5 měsíci
Join us as we diagnose a valve control. Our technicians are testing the valve control to be sure it is working properly to control the output. Once we confirm this valve control is working, we will mount it on the output and put it on our machine for final testing that will confirm we do have hydraulic flow coming through the system. We are the industry leader in service and repair to all Indus...
Calibrating Metal Detector
zhlédnutí 169Před 6 měsíci
Join us as we calibrate and test a metal detector used in food processing. Our technicians have calibrated the machine to detect any metal or foreign objects in bags of chicken and are testing to be sure the metal detector is calibrated properly. We are the industry leader in service and repair to all Industrial Electronics, Motors, Servo Motors, Hydraulics and Pneumatics. Fully load testing is...
Replacing a Backlight on an Allen Bradley PanelView 550
zhlédnutí 178Před 6 měsíci
Join us as we troubleshoot and repair a backlight in an Allen Bradley PanelView 550. There is no illumination when powering up the unit, so we will test the LCD and backlight using a voltage meter. Our technicians will change out the older lamp with a new LED lamp. They will then test and clean the unit before shipping it out. We are the industry leader in service and repair to all Industrial E...
Replacing A Membrane Button
zhlédnutí 141Před 7 měsíci
Join us as we repair a button switch in a Membrane Button Assembly. Our technicians will peel back the membrane and determine the issue with the button switch. They will replace and reassemble the membrane on the unit. We are the industry leader in service and repair to all Industrial Electronics, Motors, Servo Motors, Hydraulics and Pneumatics. Fully load testing is how we ensure that all of o...
ESAB Plasma Cutter Supply
zhlédnutí 225Před 7 měsíci
Join us as we troubleshoot an intermittent power reset fault issue on an ESAB Plasma Cutter Supply. We will test the connections and determine the area of failure. We are the industry leader in service and repair to all Industrial Electronics, Motors, Servo Motors, Hydraulics and Pneumatics. Fully load testing is how we ensure that all of our repairs are done right the first time. We fully load...
Joystick Controller Board Repair
zhlédnutí 150Před 7 měsíci
Join us as we repair and perform testing on a joystick controller. Our technicians will check for movement and pulses from each of the sensors to determine functionality. We are the industry leader in service and repair to all Industrial Electronics, Motors, Servo Motors, Hydraulics and Pneumatics. Fully load testing is how we ensure that all of our repairs are done right the first time. We ful...
Char-Lynn Eaton Hydraulic Motor Seal Kit Replacement
zhlédnutí 15KPřed rokem
Join us as we repair and perform a seal kit replacement on a Char-Lynn Eaton Hydraulic Motor Seal Kit Replacement. Our technicians will check for excessive wear and contamination along with inner and out ring replacement, bearing replacement and they will replace the seal kit. The displacement cavities will also be checked. We are the industry leader in service and repair to all Industrial Elec...
Testing A Honeywell HercuLine 200 Actuator
zhlédnutí 464Před rokem
Join us as we repair and test a Honeywell HercuLine 200! We are the industry leader in service and repair to all Industrial Electronics, Motors, Servo Motors, Hydraulics and Pneumatics. Fully load testing is how we ensure that all of our repairs are done right the first time. We fully load test all AC and DC drives after repair on one of our dynos and we back all of our repairs with an 18 month...
Analyzing Video Display Hardware Errors
zhlédnutí 134Před rokem
Watch with us as one of our technicians walk through analyzing the hardware errors on a video display. We are the industry leader in service and repair to all Industrial Electronics, Motors, Servo Motors, Hydraulics and Pneumatics. Fully load testing is how we ensure that all of our repairs are done right the first time. We fully load test all AC and DC drives after repair on one of our dynos a...
Telemecanique DC Motor Controller Output Test Using Lightbulb Fixture
zhlédnutí 596Před rokem
Watch with us as our technicians test a Telemecanique for an output using a light bulb fixture. This drive must know that it has a load in order to test the output, before we put an actual load on it using a dynamometer we preform this pretest to make sure that it does, that way nothing blows up if it needs further repair. After this test confirms the output, we will fully load test the Telemec...
Reliance / Electro-Craft BRU-200 Brushless Servo Drive Repair and Testing
zhlédnutí 856Před rokem
Reliance / Electro-Craft BRU-200 Brushless Servo Drive Repair and Testing
Siemens Simatic HMI Touchscreen Panel Repair
zhlédnutí 3,3KPřed rokem
Siemens Simatic HMI Touchscreen Panel Repair
Soldering Surface Mounted Contacts with Solder Paste
zhlédnutí 423Před rokem
Soldering Surface Mounted Contacts with Solder Paste
How to Repair a Fanuc Robot M-430iA in the state of an Excess Move Error
zhlédnutí 2,8KPřed rokem
How to Repair a Fanuc Robot M-430iA in the state of an Excess Move Error
What is the difference between surge test and megger test?
nice work
Thanks for the visit!
Hi, tengo un driver bru-500 al energizarlo se encienden los leds rojos 1 y 3 , podrías apoyarme con algún comentario respecto?. Saludos.
Can I reform several capacitors together by connecting multiple capacitors in parallel?
Thank's for the video, my Deep respect for this company.
Thanks for watching!
Great video. If the environment is noisy it is difficult to notice this fault. Coil with melted spool, or angled coil due to oxidation of the core and sometimes dirt between the core.👍👍Good job. 👍😃
Great points & thank you for watching!
Hi ! I would like to ask how to reset the circuit breaker if it remains in the trip position but is no jammed. Tried to turn off multiple times but failed to reset.
Appreciate your comment! Many variables involved in this type of repair. Is it possible to send to us? We would love to help. Visit www.gesrepair.com
thanks to share the analyses with oscilocope great job .
Have you guys tried changing the bearings on one of these?
Actually yes! As our standard practice, we won't simply repair a specific issue, we refurbish the entire unit. So we almost without exception, we will replace the bearings in a servo motor or any other type of motor. Thanks for the question!
Brillant video
Thank you!
Nice
Thanks
You're welcome!
Very nice company
This is so helpful, thank you so much.
You're so welcome!
This was awesome. Thank you for the details and demonstration.
Glad you enjoyed it!
Yo tengo un generador no produce energía ycebe bueno elnuclio lecanvie ABR uno produce energia
you guys doing nice job
please whats the pressure range pressure for input and output
thank you so much for this very helpful tutorial it helped a lot G
Glad it helped
Please send me what apps number
Hello Which MOSFET use in switch mode power supply.17n80c3
Thank you so much, haven't worked on one, really like your testing set up. God bless you.
You're welcome!
What brand of overcoat enamel should i use when re-soldering a loose joint?
Alguien puede decirme por qué al checar continuidad en las bobinas del servomotor me marca 0 homs si jiro el rotor al estar checando? Gracias
Hello, is there any solution to error u.9? Thanks.
How do you test?
It would have been nice to see the reassembly as that is what I am working on and have questions about.
Note that the NASA requires the wires to be pre-tinned. But what about multi strand wires?
Did it and it sucked when trying to coil the wires. Also I found a no solder method where you twine the wires then fold the tags 180 degrees and then 90 degrees. If that's confusing pinch the verticals and lay the folded vertical flat on the rest of the wire parallel to it. Couldn't pull it apart even without solder add some to it and you can't beat it. The nasa, leighman whatever pulls apart with little effort when not soldered. If it's tension you care about use another method
What would be the point of tinning a solid conductor? Multi strand- for sure. But solid? I’d be more concerned about not cleaning the conductors after twisting and before applying solder.
@@PonderingOne Better wetting?
@@NicksStuff No offense, but that doesn’t make sense. It will wet well if it is clean. If you use an eraser to clean solid wires before twisting, and then acid brush with isopropyl alcohol before soldering, you should be fine.
@@PonderingOne No offense but NASA may have given it a lot more thought than you did and decided it was safer to pre-tin the wires
nice video, useful !
Is there a reassembly video ?
Instead of quick-edit before and after shots, why not actually show us _how_ it's done?
this is easier
6:05 why prevent the coils from touching the core if the wire has insulation already? I know, every motor has these paper pieces to protect the windings from getting scratched if any pull occurs, but really - if the windings are already insulated, then why isolate them from the core?
Good day sir my fanuc p control have servo 400 alarm , we change the servo drive on Z with alarm HCAL . NOW we have 400 servo on the screen and Nc not ready, please we need your assistance
Hi
How chek encoder resolwer good or not good
Excelente me encantaría ir a trabajar con esta impresionante empresa
Bagaimana cara memperbaiki control servo eror
Hello, thanks for posting the video. How did you run the test? Was a voltage or sine wave applied to the anode and cathode of the gate driver? Please post your procedure if possible. Thank you.
?rotor winding test?
10128 fault coming to my powerflex 755-435 A- 600 v,can you help me
40 second long intro? But a GR8T video. Thank you
Thank you for your comments! We've updated our into & is MUCH more concise.
@@Gesrepair You're a gentelman and a scholar..
Goooood
WhatsApp number sir please
Hello sir
I don't understand how it works
Guess they don't want to show YOU to work on it!
Como se configura p368, supongo que a 3. Que más habría que poner?
Very good my dear
I sent you an encoder; you did nothing to it and returned as is, you charged 900usd for that! Scam!
Good on you dear Scott.