- 90
- 142 609
Joe Ada
Registrace 17. 11. 2011
My place to show some videos I make and I hope you enjoy.
Worx WG381 - The good, The bad and The ugly truth
*Caution* long rant ahead and long winded, so prepare yourself!!!
So my sister let me borrow this brand new saw she never used to trim some trees. I was using my pole saw until it broke so she told me to use this in the meantime until my part comes in. So I have used this for about 2 weeks now and decided to make a video on it.
So my sister let me borrow this brand new saw she never used to trim some trees. I was using my pole saw until it broke so she told me to use this in the meantime until my part comes in. So I have used this for about 2 weeks now and decided to make a video on it.
zhlédnutí: 17
Video
Craftsman WS2400 Final assembly
zhlédnutí 46Před měsícem
I installed the used parts that I got for the trimmer. Here I am putting the trimmer back together. The case is a pain and so is the handle control, so keep at it and you will get it.
Craftsman WS2400 - Parts have arrived, will it fix it...
zhlédnutí 48Před 2 měsíci
Continuing work on the WS2400 and I got the parts in to fix it.
Sears WS2400...A really bad day today...
zhlédnutí 22Před 2 měsíci
Well, not a good day today. I forgot to update on the carb issue, but I bought one off Amazon, Hipa branded. Today I was string trimming and it made a crunchy loud sound and then stopped. I tried to pull it over and it was locked up. Here is the carnage...
Well, it happened...
zhlédnutí 13Před 2 měsíci
I was using it to trim the grass using the string trimmer and I ran out of gas. I filled it up and it would not start. I am thinking the carburetor or the pulse port in the head might be the issue, not sure really!!!
Part 2 - Husqvarna MZ5225 Voltage Regulator issue
zhlédnutí 77Před 2 měsíci
Well this is embarrassing, all of these issues I was having was a battery issue. Please check your battery and get it tested Learn from my mistakes!!!
Part 1 - Husqvarna MZ5225 Voltage Regulator issue
zhlédnutí 131Před 3 měsíci
I was having issues starting and running my mower over the past few times I used it. I will explain what I found out. Its long winded so bare with me as I get to the issue I found. Thanks for watching and I hope it helps!!!
Jager made me do it...
zhlédnutí 1,6KPřed 6 měsíci
This was from the February 3rd, 2024 show and I thought it was a good little jam so I ran it through Audacity and Virtual DJ and few others to make it. This is only fan made, no infringement meant on this audio/video. Link for the episode: czcams.com/video/v47uE_wrSYo/video.html Let me know what you think, thanks.
Craftsman WS2400 27cc 2 Cycle weed-eater/weed-wacker Review
zhlédnutí 5KPřed rokem
So I bought this Craftsman weed-eater as my Troy Bilt died. I purchased this to replace it and I was hoping the attachments would work with this. This is my review of this model.
Changing your Ford\\Lincoln remote batteries (unedited)
zhlédnutí 72Před 2 lety
Just a quick vid to replace the batteries on your Lincoln or other Ford remote similar to the one in the video. I did not edit this down and it shows my mistakes along then way.
Launch of the GR Corolla 3/31/2022
zhlédnutí 120Před 2 lety
The launch of the GR Corolla for the US market. *Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of f...
Replacing the valve cover gasket on a 2006 Ford fusion with the 2.3L engine
zhlédnutí 580Před 2 lety
My friend was smelling oil from his car when he parked it. I checked it out for him and noticed oil leaking from the valve cover. I replaced the valve cover gasket on his 2006 Ford fusion. I ordered the gaskets from Autozone part number # VS 50639 R-1. I had to do some cleaning and removing oil from the wells but over all an easy job and not much time involved to do this.
Sony KP 53HS30 TV Solder Repair pt2 (update)
zhlédnutí 99Před 3 lety
Please use caution working on any TV as the high Voltages inside could injure you Update: This was recorded in February. I checked on him and he said the TV was working fine, it has been working great since it runs all day every day for his children without issue. A great repair even if there was not many solder pads to fix. It just shows you that a few repairs can make a difference and keeps a...
Sony KP-53HS30 TV Solder Repair
zhlédnutí 206Před 3 lety
Please use caution working on any TV as the high Voltages inside could injure you I am attempting to repair a friends TV, it has been working great but lately something makes the video go off but the power and audio stays on. I am thinking that there are a few solder joints that are broken so I am re-flowing the solder to those connections to see if that is causing the issue with his TV. Note: ...
Kia Remote Key Fob Case Replacement
zhlédnutí 26KPřed 3 lety
In this video, I show you how to replace the case on a Kia key fob with a new case. Its a pain to get the old case apart so you can put the circuit board in the new case. I also show you how to set the key in the case so it will flip out like its supposed to. Be careful if you use a knife to separate the old case.
2020 Nutrocker byTrans-Siberian Orchestra to Christmas Lights
zhlédnutí 131Před 3 lety
2020 Nutrocker byTrans-Siberian Orchestra to Christmas Lights
2020 Amazing Grace Techno to Christmas lights
zhlédnutí 194Před 3 lety
2020 Amazing Grace Techno to Christmas lights
2020 Wizards in Winter to Christmas Lights
zhlédnutí 66Před 3 lety
2020 Wizards in Winter to Christmas Lights
2020 MusicalBasics Fur Elise to Christmas lights
zhlédnutí 175Před 3 lety
2020 MusicalBasics Fur Elise to Christmas lights
Illuminations LED 4 port light wizard (Part 2)
zhlédnutí 11KPřed 3 lety
Illuminations LED 4 port light wizard (Part 2)
Illuminations LED 4 port light wizard (review)
zhlédnutí 12KPřed 3 lety
Illuminations LED 4 port light wizard (review)
Trying out some L-shaped connectors for LEDs strips mounting
zhlédnutí 9KPřed 3 lety
Trying out some L-shaped connectors for LEDs strips mounting
Husqvarna MZ5225 mowing deck belt Replacement
zhlédnutí 7KPřed 4 lety
Husqvarna MZ5225 mowing deck belt Replacement
Scott Pilgrim VS the World my favorite clips
zhlédnutí 42Před 4 lety
Scott Pilgrim VS the World my favorite clips
(Update) How to Hang RGB LED strips using J channel on your gutters for Christmas
zhlédnutí 2,9KPřed 4 lety
(Update) How to Hang RGB LED strips using J channel on your gutters for Christmas
How to Hang RGB LED strips using J channel on your gutters for Christmas
zhlédnutí 7KPřed 4 lety
How to Hang RGB LED strips using J channel on your gutters for Christmas
3 years later still as useful!! You just saved me $350 dollars. Thank you!
I use needle nose pliers behind the key works a lot better then a nife and faster
💪🏽🇷🇺🇺🇸🏴🪖👟🚶🏿🍺🧃🌞🌙🌞🌙🌞🌙🌞🌙🌞🥊🥊🗽🗽👽🌞🌙🌞🌙🌞🌙🌞🌞🌴
I only watched this to see chip removal… but not on this model
Would Smash
This video has more than 279 views now, but I am a little disappointed that nobody made this comment yet. :)
That flywheel and fan assembly should pull off with a puller from Harbor Frieght should be able to pull against the center of the crank shaft ! You just need to spraysome PB Blaster on it and try not to break the flywheel any worse ! But it should come off without splitting the case !
Yeah, I was able to remove it last night. There was a washer that holds it on, friction fit. I found the parts that I need...just got to order...
@@joeada9309 Cool deal ! Tgat beats throwing away with it only being a yr. or so old ! Seems that's what Manufacturers want though is for us to throw away and by new equipment or vehicles ! I try and fix what I can myself ! That's the way my dad taught us and ive taught my boys !
Would smash
Would smash.
Thanks, made my day easier
I got some badger attachments that work on the craftsman
What brand are they, might look at them?
@@joeada9309 wild badger is the brand. I got there hedge trimmer attatchment off home depot site for $60. The depot sells all their heads thoz I’ve used it 3 times so far and it’s worked good. I had to trim an over grown rhododendron that I prolly should not have cut with hedge trimmer but it did the job.
@@joeada9309 my weed whacker is the 27cc bushwhacker speed start. Same box drive as yours in video tho.
You made that look so easy thanks
You’re welcome 😊
GTTP Get To The Point! Please just quit flapping your gums. Why not use a flat-blade screwdriver?
Yeah I do that...sorry.
How's it been treating you? I have a Troy Bilt TB2044XP that I got back in June of 2016 and it's still working and running great.
I have used it a bunch...i have been clearing a big lot for a friend using my brush blade and my chainsaw attachment going for 3-4 hours at a time and it's working great...no issues to report. I have been making sure that the gas and oil mix are new so that is probably helping. No issues with running or starting, it's working well. I can say I have run it hard and run it full tilt through a tanks of gas. I am happy with it. Thanks for the reply.
How is this holding up?
I have used it a bunch...i have been clearing a big lot for a friend using my brush blade and my chainsaw attachment going for 3-4 hours at a time and it's working great...no issues to report. I have been making sure that the gas and oil mix are new so that is probably helping. No issues with running or starting, it's working well. I can say I have run it hard and run it full tilt through a tank of gas. I am happy with it. Thanks for the reply.
Would smash
Thanks for that very clear instructions
Would smash
Dude... you spent almost 20 minutes munching this case with a knife. The term "carefully" has nothing to do with this process 🤦🏻
It was the old one so not a big deal...
This is the best. Thank you for doing the lord's work.
Would smash
Would smash!
Would smash
Would smash
Thank you, this gave me closure
This really is an important message.
This is, too (original song) czcams.com/video/xAOcrFxA7yQ/video.htmlsi=MKHN4MqezGeyXWbg
Thank you for making this! 🤣
This song helped me cope with tragedy
would smash
Would smash
Hot track
czcams.com/video/xAOcrFxA7yQ/video.htmlsi=MKHN4MqezGeyXWbg
It's got a nice beat, and we can dance to it! May Chloe Fineman be in touch. :)
Wonder if Chloe loved the original czcams.com/video/xAOcrFxA7yQ/video.htmlsi=MKHN4MqezGeyXWbg
Original song czcams.com/video/xAOcrFxA7yQ/video.htmlsi=jh9KD9hIC6SWPXcJ
Thank you!
Ha nice, I came after the clip to search for that exact beat
Original song with a full beat... czcams.com/video/xAOcrFxA7yQ/video.htmlsi=MKHN4MqezGeyXWbg
Would smash.
Great video! Do I need to do an oil change after replacing the valve covers?
Not really unless it's dirty or needed...just keep the area around it clean and you should be fine.
Would smash.
I have a 2013 Sportage. Don’t forget to transfer transponder chip from old fob. It is under white cover at top of fob. Without this chip car will not start
I only replaced the case, the guts of the remote were moved to it, thanks for the reply.
@@joeada9309 The immobiliser chip is in the corner of the part that houses the circuit. It's wedged into the case and is not part of the circuit board, nor is it attached to it. People unaware of the immobiliser will throw it away with the old case and be unable to start their car!
🤣
This thing is water resistant?
Yes it rained after I recorded this and lights never went off.
Only works with LED lights. I have them and they look awesome.
Thanks for the video. About what I expected the job to be. Already have the exchanger. Only thing I see is the gasket for the flue collector box I may need.
It's a bunch of work to do...but once you have all the parts it should go smooth. The only issue I had was bolting in the exchanger by myself...but once it was in it was easy.
Great job 😊
Thanks! 😊
Can you hook up incandescent lights to this
Yes but you will have to limit how many lights and the wattage of the string of lights...it should say it on the box of lights your adding to it. Keep the wattage in check and use all 4 ports just like on the video. Hope that helps.
Can you make a video of how to take the 27cc WS2400 head off?
I would but I use it, but if something happens to it I will.
With the mixture. Does it have to be full synthetic or what is ok to use ?
I use husqvarna 2 stroke oil, its a synthetic oil. Not sure if there standard oil since I only use the husky oil for everything I have.
Maybe its because I am left handed.... I hole the motor end with right and guide with left. The exhaust practically burns my right arm. Thanks Craftsman. I immediately change to blade type trimming instead of stupid line.
Yeah a friend of mine is left handed and he had the same issue with this, the Troy built I had exited out the back so he was able to use that one for a while.
Thank you very much sir. This so much easier than how I was doing it. Have a nice day, as you sure made mine.😅
Thanks!!
Please stop using string trimmers, they put heaps of micro plastics into the environment. There are other options.
I am sorry, I have acres of land and have no choice.
I wonder what people did before line trimmers came along? Powered hand shears, stringless brush cutters (longer life of blade vs string and seconds to change), hand shears off the top of my head.@@joeada9309
What the fuck
There's no other option
@@arturos.l.2248 Blade trimmers, hand shears, scissors. No options huh. Try thinking
Van de la mano lo instrumental con las escenas de la película....lo máximo
democrats are BANNING gas powered lawn equipment state by state. you should have bought electric
I would have but I have many acres and batteries would not work for me, I have used a friends electric and I used both batteries and was not even half way done. It rained that day so I lost time waiting for them to charge. I do understand your point tho..