Video

Hey Aaron, thanks for this video - helps a lot! Will the USB-Hub / Capture-Card-Solution work with my older iPad Pro with Lightning-Connector or do I need a new one with USB-C-Connector?

This or a yolo liv ?

I want a switcher with borders, can load vids, usb-c mobile network link, 4 inputs, does it exist?

Whats a good camera todo 24/7 streaming with the yolo mini....clean hdmi out?

Nice setup

I have an older version of that bag and with my laptop and camera gear I began having shoulder issues because the straps were too narrow when fully loaded.

Great video Aaron, but maibe you can help me. I am having a problem during my live streams on Instagram When I stream a local video, either through the USB port (external hard drive) or the SD card, the audio doesn't play. It's strange because when I open Instagram through the Yololiv Instream and choose "post," the video plays with audio normally. However, when I switch to "story," "reels," or "live stream," which is the real function of the device, the video plays without sound. Do you know how to fix this? I have tried all possible audio settings, selected AFV, turned ON Local Video, etc., and nothing works.

Why the 'eff is this not offered on the gimbals that require the app to use special features like tracking.

tl;dw - SRT handles h.265, so it can be way more efficient, plus it drops fewer frames.

Aaron you are better than ChatGPT. Thank you man!!

Can I connect transmitter to Canon Legria HF G70 - 4K and view it on smart tv

How do you bring a VDO Ninja guest into your ATEM to then use that feed into SuperSource? Like the way brought Adam in. Thank you!!! 😊

Please turn the AC up next time! 😉 Nice video with tons of little golden nuggets!

How did you make the map of viewers?

Quick question, if I wanna have the Multiview on my computer, does that allow for me to hear the audio or would it be solely Multiview with no audio?

Hi Aaron, really love your contents even thought I just found your channel today. Quick question that I have in mind and couldn’t figure out. Could you please explain this to me? On your multivew, there is one box where it is a combination of your main camera and desktop screen layout beautifully put. How can you do that? I know atem mini support Picture in Picture but not like your customisable. Thank you again

I follow Set a static IP Address on Raspberry Pi OS Bookworm Tried setting a static IP but got error: unknown connection 'wired connection 1' Can anyone please solve it? Thanks

And the ability to break the ATEM Mini Pro. As after the update and firmware update the software control will not connect to the ATEM Mini Pro. Not sure how to report the bug/BlackMagic didn't test it! I had to downgrade it to get software control to work again. This was with 9.5.1 (didn't try 9.5). Got it working again with 9.4.

0:50 This is why I suggested to a blackmagic engineer at a trade show, something like an 8x8 matrix, where 4 inputs and outputs are hdmi and 4 inputs and outputs are sdi. So a universal matrix AND converter all in one unit. Works as splitter, converter and router all in one

Come on, it’s a long time to release new prosumer Atem, not another update! What are they waiting for? 🤨

Hey Aaron, I've been watching lot of your videos. Thank you for all the info and dope videos! I wanted to know if you knew how to get good audio signal livestream to the ATEM EXTREME ISO HDMI version? There is that 1 audio port and the lack of XLR makes it difficult to get good audio. Is there something black magic makes that I could get to help this? Live-streaming with 2 camera and 2 wireless lav mics to an interface into pro tools. thank you for your time!

This video will be useful to so many people, not just podcasters/youtubers.

Somewhat curious if the devs of the Companion image for Raspberry Pi have considered making the image available to the Raspberry Pi community through the Raspberry Pi Imager. I think it would be more likely to be checked out by people interested in doing even more with their SteamDeck. I'd also kind of like their home page for the software to indicate what platforms they know it's working on. The fact that it's available on a Pi suggests that it should be available on Linux in general, but I don't consider it a given.

Question, is the output of the ATEM going all the way to the projector? Or how is that achieved while still having your preview monitor?

Great video. I would suggest the Companion emulator over the web buttons.

when can i get SRT Enabled on my channel? pls

2:19 how could u see the game from the console while connected to the mixer ?

I completely agree on the Up and Down buttons.

Great information. Thank you

the the Instant replay only for Mac user?

I have deployed companions on mini-pc at many places but I plan to use raspberry pi 4 because of low power usage and lack of fan noise.

Could not chat... hmm.. I could not find a way to stream Multiview out instead of Program, any idea what I am missing?

As I livestream more events, where do I begin to send my SRT streams? What platforms support SRT? How wouldI use it for a client?

Hi, Is it possible to live on Instagram, using Osmo Pocket 3?

EXCELLENT PRESENTATION as always. Thanks, Aaron.

Have been using Companion for a few years, amazing tool. Love when a video like this is released and I learn a few new tricks. Strong Work Aaron!

Please more content like this

I had wanted this option, especially in my flypack so I don't need to go around with a laptop if not needed. Is it possible to install other supported software like a playback sw(playout bee etc) alongside companion since you installed a custom pi image. I would love where I can have automation and also media player in. a single pi.

Excellent tutorial!

Can you run it on proxmox?

This should garner some boosts, and suggested videos for ALL of YT. I feel like the algorithm is strong for this one. 👍 120 views in the first 43min. not bad.

Exactly, better buy PRO version ;)

In my day in TV we would edit a quick turnaround program that was shot as live the editor would start editing the program a few minutes after ecording with ISO's on growing files, WOW now you can do it with the ATEM and Davinci, and dont need a EVS to do the growing file recordings

Sugget me a switcher with multicam cam instant replay for obs not all in one device.

Aaron, thank you, any apps, etc, for android and Windows...?

Thinking about the converters - the idea of having all the ports on one side is if you want access to both the inputs and outputs.... But, if you have either an HDMI switcher or SDI switcher (which is why you need the converters) then you can arrange it do the output of the converter is pointed at the switcher in the rack and then you only need access to the input side. Just flip the converter to the input side you need, and the output will be facing the switcher, in the rack. For instance, in a home rack, I want an ether ent switch, but I do not need to see the ports because I set it up once and will never touch it except for that rare occasison I change something. But I DO want to see the lights indicating that it's working correctly, so I want lights on the front and the ports on the bac, so all the gear in the rack connects to other gear in the rack, without poking back outside the rack. THis includes power. So on most every basic ethernet switch, I need to have both the power jack and all the ethernet cables facing outside the rack, and all the cables circling back into the rack, just so that I have the ability to see that it's powered up, POE is active, what ports are passing data, etc. Very annoying and cluttered.

Would an extrernal screen like a touch screen tablet pc need to be running win 10 or later. Same with older android tablets? Seems like many if the cool new programs require cool new computer$. I have older machines that I would like to use for remote control, but they aren't win 10 compatible (my old macbookpro is stuck on iOS10!). In guessing because its IP cloudbased, it wouldn't matter.

Would the Tiny2 be a better option over the insta360, or is the insta360 an easy set up with similar no lag output?

Can you limit countries from where viewers can view your stream (like US Only for private streams)

re @wutrudoin's question @52:48, you can set the ATEM file name using data from a Google Sheet... use the variable $(sheet:0_Sheet1_A1) in the atem Action: "Recording: Set filename" filename field.