Video

I like your product

Niezłe

Sick bushing I never see

Bonsai Concert back in the day

Only 3 comments

bought 1 set of them and will never buy them again, way to expensive for the quality. had bearing slip on day 1

Great comparison video. Especially at the end with the touch test! Would've loved to see the standard shipped bushings in the touch test for the in-between feel that's neither super soft nor super hard. Thanks!

Hello, can anyone tell me if the Cruisers model has grip. Thanks

I like your product

I like ill pills and oak wheels havent tried the black river wheels yet?

What’s the difference between the Blackriver and Berlin wood boards?

what happened to berlinwood???

I own this one too love it

Waiting to try a 33.3 xwide deck with my 34mm xwide br trucks and g8 wheels.

Love mine 32mm, they just feel perfect right out of the box and the build quality is on part with the highest quality skateboard trucks (maybe this explain the nearly same pricetag 😅🙈)… But they are just the best in the market with a huge gap to the second place (not sure if that is y trucks or dynamics), even from pictures you can already tell that this is on another level like all other brands and you just get what you see, the nearly perfect fingerboard trucks…

Good to know, at some point I am sure that I will buy 1 or 2 decks from BR, so now I already know wich 2 sizes I would try mostly (32mm in high and low) so thx to save me the time for searching…💚☠

My honest review to the 30mm starter bollie complete: The starter Bollie setup was to be honest not that great when I come back to fingerboarding a month ago, the trucks already broke after 3 days (same issue like on the smaller tech deck trucks, one of the axis pins come loose) and the wheels kind of died just a week later… The trucks are very awful and the wheels are really just a small step up to tech deck wheels, the bearing pockets are nearly not existing so the back of the wheels broke, next to that the bearings sliping around even on first day and they are just pretty cheap Plastik with no effort into it, they still kind of run but wouldn’t ride it anymore, now they are on a pure cosmetic tech deck setup with no other use anymore… Don’t get me wrong, when I compare that to a 25mm tech deck from 1998 (and even with everything till today from tech deck) it’s a very big improvement but when I compare it to the more modern Produkts like the ASI complete 2.0 (20€) and the 3.0 (25€) it’s not really on the same level (32 and 34mm, single axis trucks and on 3.0 seems even hardened, still plastic wheels but with way better build quality and even the foam tape is quit better)… And to be fair, even the stuck 32mm tech deck stuff hold up better as the bollie trucks, I replaced them in first step with Tech deck trucks cause needed one order more to find very nice inexpensive trucks… So the best to say about is that the deck is pretty nice, the pop is quit nice, the shape is good, quality seems to be good as well and even the graved in graphic is completely ok and nice work… Would 30mm not be a bit too small for me I think I would still ride it and even if not anymore I will keep it for sure just to compare it with other boards cause it’s still completely fine even after 3 very hard coming back weeks… In the end I be still thankfully for the board cause it brings me really back to fingerboarding but just 3 weeks later I am now on a ASI shop deck 32mm (with the blackriver uncommon pleasure holo sticker 😜), blackriver trucks (they are pure perfection) and still switching between couple sets of wheels (ill pills street, kraken street, kraken conical, kraken bowl, spitboards swirl, spitboards urethane and tuned asi shop wheels) which is all together sure somewhat more pricy then the bollie complete… But my secondary EDC dry and wet setups are quit more on this level with 32mm tech deck deck (wet) and 32mm asi shop deck (dry), 32mm asi shop trucks 3.0 with beta bushings (weight more but performs nearly like brt‘s with the betas) and still switching wheels… The wheels are highly depending on what I do, but mostly I use spitboards swirl, spitboards urethanes and asi shop wheels tuned with a very soft rubber coating (tuned be my self) cause they cheap and it’s not too bad when they will be gone outside, so both setups are damn cheap with surly under 40€ but perform on a pretty high level for this pricetag, that’s for sure more then for the bollie but it’s anytime worth it cause that are all parts that will last for more then just a week of pretty hard times when coming back… And with that we come to my results, the Bollie completes are ok to make first steps but have so much room for improvements, at least put single axis trucks and at least better shaped wheels to it, that didn’t change that much in price (maybe 5-10€ more) but brings so much more quality and performance to this setup that I could finally recommend it to others but without that changes I would go with other stuff like the asi completes or maybe the bullgod completes too when they really will ship to Germany for free (haven’t tried it till now but maybe I will next month)… So it’s an ok, cheap setup but if you ask me, still a bit to expensive for what you get so please make it cheaper (at least 5€) or put longer lasting parts on it (then it’s even ok when it cost 10€ more) but for what it is now you just got better stuff for this pricetag and i‘am not even talking about cheap china knock offs, just parts you can easily get by order on trustful stores… And before someone say that the asi shop trucks 3.0 are brt knock offs, they just not, for sure they share some design features but not more like on dynamic or y trucks, the base is a bit like brt (Indy’s) and the hangar a bit like dynamics (venture trucks) but in the end they are still different and more then enough to see them as own trucks cause the quality is noticeable better as on the more common china trucks (like the 2.0 asi shop trucks) and I have multiple of both plus a set of brt’s to compare…

whats better this or the bigger ramps one :3

Mmm yes beginners will be starting on this

Information was helpful but what material are they using? simple hard plastic or is it some mixture for better grip for example ?

Is it difficult to use a 34mm Dynamic Trucks on a 33.3mm X-Wide Blackriver Deck? I have a set of Dynamic trucks and a shop near me only has a BR thats 33.3 X wide... I need an opinion. I mentioned Dynamic trucks because I heard that the 34 Dynamics are different than the 34 BRTs in terms of the physical length

Are they rubber wheels

What would be the difference between a low concave and a normal concave deck which are both the same width? Does one of them help with stability?

Just ordered some street dogs then you go and drop the Ill Pills collab. Wounded. Still gonna buy some though.

I still miss the Winkler wheels, but blackriver wheels are not that bad..

how do these handle outdoors use ? do the bearings handle the dirt well ?

very cool 👍

So many choices!

Jesus Christ loves you❤

Hey! Don’t forget that Jesus Christ loves you and he died for then rose on the 3 day have a blessed day ❤

The 29mm Envoyege deck was my first pro setup just in 32mm! Still going strong!

Just got a pair of 32 gold BRT.s and a 33. Deck flatface blackriver deck as well

Love the 3.0 trucks you guys make!

Do the single bollie decks come with a uncut pice of riptape or a pre-cut piece?

Cool tricks 😍😍🤩🤩🤩🤩🤩🤩🤩🤩🤩

Hi

So sick!

I got the old style of this one, the one with the piece of metal at the entrance of the transition. I'm planning to get the extension one in the future. I'm wondering why it doesn't longer come along with the piece of metal, it took away the realistic look.

Can't wait to have my hands on the Thom Mcinnaly pro-board. It looks beautiful.

Dope video

Nice can you sponsor me

..ich mag die blauen ✌️😚💨

..es gibt fast nichts schöneres auf der welt! ✌️😜

..let the goood times roll.. ✌️😚💨

thanks for explaining

polska

nice

🙌

Amazing 👌

This thing is twice the size I thought it would be. Definitely buying one.