Video

@IOverdoneCrownI I'm in the USA so we only have one sensor. I think Europe and some other countries have 2 sensors for environmental control. Try it with just one sensor. Maybe you get an engine light. Also, if you have issue with engine not starting or cutting out, then increase the "idle speed" with control on bottom right of bike.

Ok thx i Will see

@Band222 Probably not a good idea. The o2 sensor may go crazy. Also, the muffler and cat converter are one piece. Once u cut that off the pipe is just gonna hang on bottom of bike.

@Band222 I had to take off the aftermarket exhaust when I traded in the ninja 650. I'm in the NY/NJ area if u want to get it cheap from me. I'll also include bunch of left over parts for Ninja 650...

@@genxjya ohh ok thanks u got a link for the exhaust in this video?

@@Band222 It's in the description. www.ebay.com/itm/175881757293?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=jbdlh7pqrkg&sssrc=4429486&ssuid=IhUZRFMFQkm&var&widget_ver=artemis&media=COPY

@the-square-hub It's Rhinowalk Tail bag. See 9:30 section of my other video here: czcams.com/video/blOgjjDmArM/video.htmlsi=lXnw_DIQ8_m-Bx5f Both Walmart and Amazon has them so get it where it is cheaper. I have the largest one and also the smaller version. www.walmart.com/ip/3341708488 a.co/d/gMh5BTU

@Glenn3000 Thanks If u didn't buy the exhaust yet and near NYC, let me know. Traded in my bike and took it off. Sitting in box with other ninja 650 parts & Accessories.

@burundoyins9583 No probl. I changed to a fast charge usb. Go to 9:13 min mark in this vid... czcams.com/video/IXwKYzQ6yig/video.htmlsi=7RXwu4C8T2Mnwd0o

@cschacker99 Works great. Hopefully it's still available.

@louierivera7512 It's the Womet Tech Total Protection Package. Here's the video czcams.com/video/qw-uUvCnqPE/video.htmlsi=EwIhP0Yfld4F13fp

@louierivera7512 If you want something cheaper, search Amazon for DMD or Shogun Frame Slider for Ninja 650. Also, Front Axel Slider (there are also rear axel sliders but u can't install it since Ninja 650 has a pin in the rear axel).

@louierivera7512 I traded in my Ninja 650 and have a bunch of extra leftover parts and accessories for it. If u r near NYC area, let me know if u r interested.

@@HeYiTzCoLbY Thank you...

I did this since I had another vid picking up the Yamaha MT-07. Anyway, thnx for idea. czcams.com/video/Fy7c2c8wGZ4/video.htmlsi=cfWpf_1jJeiBvKNX

@jneptune1540 lol, I guess we were lucky. I know another family who went to Hiton Tulum and they had to evacuate...

@@genxjya my kids are loving you videos bc we were there and they saw you.

@jneptune1540 glad they like it... my girls don't like it too much... had to edit them out a lot...

MZS Bar End Mirrors: www.amazon.com/dp/B0BG56ZZZC/ref=cm_sw_r_apanp_P1DyyPwDLEU3V Review in my mods video: czcams.com/video/blOgjjDmArM/video.htmlsi=3yFL4iSr2oS6Rngx

No problems for me.

Hell yeah but it is what it is...

I'm not sure but if you don't have that dummy hole next to dash then probably don't have the power connector. You would probably need to buy amazon usb that connects to battery directly.

New York Honda Yamaha (718) 784-6200 g.co/kgs/QfFwoQ2

That's the quad lock vibration dampner. You can get it on amazon. Or u can also get aliexpress copies for cheaper.

Lol... It's just that some motorcycle stuff are so overpriced. Gotta save $ so I can use it for good stuff like visiting Australia.

It was just too expensive. Anyway I got an MT-07 now so may get Akrapovic for it.

Jaenuwine@gmail.com

Mounts Lab MotoMount Ninja- Kawasaki Ninja Motorcycle for 12mm Hexagon Hole Mount/Fork stem Base Mount with 1inch(25mm) Ball- Compatible with Phone/Camera/GPS Mount(Adapter), black (ML-Ninja01) a.co/d/fQB7noq Is this what ur looking for? All the product links r in the description of video.

I didn't. Anyway, had to remove and put oem exhaust when I traded in. If u r near NYC, u can have mine for cheap price.

This exhaust is only for US version with 1 O2 sensor. If you already bought it then maybe you can plug the 2nd slot with plug screw that came with exhaust?

@genxjya it's not that a slot remaining. It's the second sensor (and the wires) that are left hanging, and I'm nervous if it will appear the check engine

@@TapHelmet Just unplug the 2nd sensor and see what happens.

Actually it's more expensive otd then similar msrp/cc bikes. Also used prices are much higher than others. For example, I could get Z650 or Ninja650 for minimum $1k less than mt07.

@@genxjya the mentioned are very beginner friendly. I know because my wife has the z650. The gsx750, honda hornet 750, gsx8s are the bikes the mt07 has to compete with.

@kellyd1910 I'm gonna put some massive miles on my mt07 so hopefully no more issues. It's awesome ur wife rides. My wife wants no part...

I don't think it has anything to do with the price. There's clearly an error in manual, cause they torque spec is way to high for such a small bolt.

czcams.com/video/qWBQK7Xu8FI/video.htmlsi=cPyXUwD0vtzalkGf Here's the vid of phone holder. Product links are in the video description.

That's crazy. For the rear axel, I used 75 ft lbs instead of 77 ft lbs in the manual. I think yamaha or any manufacturer should always design so there is some protection above or below torque. Especially for common maintenance stuff.

@@genxjya exactly! mine was also not on warrenty so i paid full price for the spare parts.

@Brabobiker. Hopefully no more issues. Love the bike though...

I think that was a good day...

Lesson learned.

Hopefully I don't have any more issues 😅...

Yes major QC issues. I bought a '24 MT07 3 weeks ago and last week the engine started making a clanking noise along with a serious vibration. Been sitting in the shop for a week now with no answers yet.

Thnx.

Yes. Used generic one from Amazon. 20 Pack M14 Oil Drain Plug Gaskets Crush Washers Seals Rings Compatible with Hon da Yamaha Triumph Kawasaki Suzuki, Used for Oil Change a.co/d/ezg0x2o

@@genxjya thanks! I’ll be doing my first oil change soon,think I’ll just hand tighten or 15flbs

@DscRides577 Good idea. I even saw a post on reddit where the guy cracked it with 20 ft lbs. Tight with hand then maybe 1 or 2 tugs should be good enough. Check the chain - after adjusting I torqued the axel to 75 ft lb (manual says 77). I skipped the Throttle body sync (really unnecessary unless bike is running weird - idle jumping, lots of shaking, etc).

@@YammiePro Hand tightening a drain plug is way to loose. You'd be lucky to apply more than 2-3 ft lbs of torque (or 4-5 Nm by hand (IF you mean by just using your fingers). The correct torque should be used, and if it cracks like in this video there's a serious production error (I did'nt see the full video, just the start). If you hand thighten it, and it comes loose while driving, you get oil all over your back tire and a very possible whipe-out (plus much likely a ruined engine). If in doubt, why not let the dealer take that first service? Because then if, against all odds, this happens when the drain plug is thightened, it's on the warranty. In Europe (where I live at least) the warranty is voided if service program not followed.

Do u have to tall one or the standard one from puig?

I did the door opener with outdoor rated velcro on my previous bikes. I can take it off whenever I need but even if it gets wet, just let it dry out and no issues. I didn't have any velcro this time but will change. Quick shifter is tempting 🤔 but no $ because I had a major issue during my break-in service. Vid coming soon...

Got 2 Yamaha OEM replicas. They r good quality but doesn't do much with wind. Will check out National Cycle one or maybe get a replica of a Puig.

for my 2022 Blue MT07 i bought the mid size Puig windscreen....I think it's the perfect size for the MT07 I love the bike.....It's hard to go slow...

@stevegaines-vq3bd I'm gonna get the replica one from aliexpress. If the quality is bad then I'll get the authentic one. So the puig does give ok wind protection around 80mph?

@@genxjya IMO, most windscreens are too small......Puig sells 3 sizes, The middle size is perfect.....But It is a "naked" bike so going 80 + it's ok but not going to block all the wind.... BUT... It looks cool AF......

I traded in for mt07 about 2 weeks ago. Got lots of extra parts if u r near nyc.

It's called a tail tidy... Thnx for ur input.

I don't think so. Check the width of the hole. This will fit if it's 12mm.

That's a premium stand. My cheap harbor freight stand is too narrow...

What about the port thats on the side below the seat idk what thats for

OK. I see. There is another under the seat? Didn't see that one, I'll check that out.

Connecting an ecm scanner/ code reader plugs under the seat. Should look into CB racing case savers covers left / right,water pump and water outlet.

You mean the small windshield I have on mine? Does almost nothing but does look good. Your exhaust sounds good but probably not gonna mess with exhaust til warranty is over.

All the links for the products are in the description. Got the rear rack from revzilla.com www.revzilla.com/motorcycle/yamaha-rear-rack-top-case-mount-mt-07-2018-2019

Ya, that bike was loud... I can't do a straight sport bike. I need an all around. Your bike with the new color scheme gonna look and sound sick!!! Enjoy!