Video

0:32 I see that smile after saying Deez Nuts 😂

🤤🤤🤤

The best and most quiet was the stock muffler. The sounds of all the aftermarket exhausts were terrible! Why would anybody spend $1000 to have more noise in the cabin…don’t understand. The HP gain at 6500rpm is minuscule. Its useless gain for me because I will probably never run my engine at 6500-7000rpm. Bottom line….if you want your 6 cylinder sound like 8 cylinder, then get a truck with 8 cylinder engine! All the sounds presented sounded fake - imitation of 8 cylinder engine. Why would I want that ?! Its embarrassing.

Why shackles over adjustable shocks for the rear??

I installed this today on my 2023 P4X. It was easy, however I did one thing different, I removed the shutter assembly to make it easier, that was easy to remove. I removed the Grille to, along with the hood latch assembly. Re Assembly was easy, I also trimmed that rubber strip on shutter assembly that rubber was pressing so hard on the lights and wiring, I took a sharp blade carpenter knife and sliced 5/16 off it entire length, now it fits just right. And THANK YOU for a Awesome quality product. One question.. in the future if a light burns out can a single light be purchased>?

😮‍💨 Beauties

First shot it looks like a super nice power wheels truck lmfai

Looks great, also like the bumper that you have installed. Which bumper is that? and is it compatible with the adaptive cruise? Thanks.

Beautiful! What is the lift kit on that???

The dealer will cross thread the skid plate and use power tools to put the oil filter on too tight

😍

Is this the one with the supercharger you guys are working on?

Titan swap plus body lift?

I want to build my like this you got a beautiful truck

What’s the lift that you put on this truck and the bumper price and if is available now

How bad do the 285s rub? Are the spacers needed in order to run them?

What's the warranty and where are they made?

I purchased these a few days ago after watching this video. I just got done installing them, and this video made it super easy. They look awesome! Thanks!

Need a breakdown tour on this truck lol. Like the last orange frontier ya did.

Looks great compared to gay ass Tacomas

Is that a new cold air intake tube Z1 is working on? I have the cold air intake from Z1 but it's a matte black tube, not that carbon fiber looking tube in that's truck.

For the Borla S type, did you notice the clamps coming loose? I installed mine last weekend and put about 75 miles on it. Noticed all the joints were loose.

Z1 The gift that keeps on giving. Enjoy having subbd to your channel.

Beast

This video was too long. Halfway through it, I got hungry so I left it playing and went to the kitchen to fix myself a sandwich. But then I found out that I'm out of mayonnaise so I went to the store. There, I saw the most beautiful woman I have ever seen in my whole life. But I'm really a shy person so I took up a three-year personality development course so I can introduce myself. She was very friendly and all, but unfortunately, she had a boyfriend. So I said, all good, I'm a mature person. I want the best for her and I harbor no illusion that I am the best person for her and she seems happy with her boyfriend, so I did not bother her anymore. But we kept in touch and we became friends and I got over my crush on her. Then she broke up with her boyfriend, we drank some alcohol because of it, I told her she'll be fine and I wished her well. I still think she's the most beautiful woman in the world, but like I said, I am over my crush on her. It was like five years already when I first saw her. Besides, I am quite happy with the friendship I developed with her. It was more important than a crush So we kept hanging out, drinking, having coffee, and all. I had a girlfriend, she started dating other guys. My girlfriend wants to live some other life without me in it, so I said, okay, I want the best for you and I want you to pursue your happiness. My lady friend and I drank alcohol about it, and she gave me the same advice l gave her when she was in that position and I became okay with the breakup immediately. But we were really drunk, so she spent the night in my apartment. I only have one bed, so you know what that means: She took the bed and I slept on the couch. But on the couch, I really can't sleep. Something was bothering me. So I tossed and turned for about three hours, then I finally can't take it anymore, I stood up and went straight to my room where she's sleeping. I approached the bed, gently sat on it and I reached for her shoulder to pull her closer to me. She stirred and woke up. She asked, "what's up?" I told her, you know, the first time I saw you, I was watching a video and left it playing to get myself a sandwich then went to the store to get some mayo then I got distracted by life that I forgot to finish the video. She said, you know what, I've been wondering about a weird noise in your night drawer. So we opened that drawer, and lo and behold, there's my phone and this video still has two minutes of play time on it.

2025 Ranger Raptor Doesn't even have these Cosplay Lights. If your not driving a full sized Raptor its all Cosplay and we Know it!

I have an opportunity to buy a 2007 Nissan Xterra · X Sport Utility 4D 120kmiles for 3800 But the front grill is alightly busted and missing a chunk by the Nissan. Logo But other than that, it just has the bubbling. Paint from rust a little bit on the hood

Can you tell us what the build specs are? Lift size wheels tires and is a wheel offset used for this look?

Borla sounds best

They look good when installed and on. However, a few notations.... Ended up installing the fuse to fuse 45, 10A located on the other end of that short row of fuses from the ABS module used in this video. It is immediately under the 15A (blue) fuse at the other end of the row. (You can see the blue 15A when he is plugging in the fuse at 15:21. This fuse is hot when the ignition is ON or START. And the fuse holder fits better. (I would add a photo but not sure how to post to this comment!) On my '23 there are a total of five T15 torx screws that need to be removed. Two torx screws on each side. Inner is for the plastic cover, outer may just be for the grill. However, I removed the two on each side just in case; not that hard. Also there is another torx screw in the middle just to the right of the hood latch; looking at it from the front of the vehicle. Forget those tiny tie straps. I used 3.5" black straps and they were hard enough to get locked; cannot imagine trying to use the small ones that came with the kit; at least after the lights were installed. Even though I did NOT remove the grill, it was a pain to align back up with all the locator locking pins and it appears both sides need to be pushed in at the same time. Or at least that is what I found on my vehicle. Also those six push pins, along with where that plastic cover attaches to the grill really hold that grill in place more than the side pins. Overall, not a hard install if you have all the right tools. At least you can do it all standing up.

Uh is that flip in the beginning real? Can’t be ,right?

I would guess he means "orange Permatex," since Loctite is a brand name and don't believe they make an "orange" threadlocker. However, I would most likely use 'blue."

only 1 question..... why the hose has to travel all the way till rear tail light?

What are the biggest size tires you could fit with this lift for no rubbing?

It’s beautiful 🥹

What lift is that? Stance is tough

Anytime you mess with the air intake you Must re tune! Are you telling me that yalls CAI does Not need a tune???

Dee’s nuts😂

Who can I have install these on mine?

Digging the looks of that new snorkel!! Can't wait till it's released.

Borla sounds badass, but seems like it'd get obnoxious every day. I'd say Z1, Nismo, Borla, in that order. Just love how much cheaper these are vs the $2200 Ark Grip catback I had on my G37.

Those are markers lights and you should tap on the markers fuse. Not ABS

I couldn’t even start to imagine having that truck ! Only in my dreams. You guys have done an incredible job. Way to go !

The other kit the lights just snap in...much easier to do

good stuff. when is the super charger coming?????

I need a good hood decal installed video?

Deez Nutz........ha ha ha !!!

I personal think AFE looks the best and has a dry filter

How does Z1 Air intake do?

Nope