Video

I really need a battery but AIWA seems to be unavailable. What a bummer!

Waste time

Hey does anyone know if u can get a table extension for the 8 in rigid wet saw????

Still one of the best bluetooth speakers - the battery died on mine after 4 years too, I think I left it empty too long not sure. Seems so soon. Took the battery pack apart but still figuring out the best approach to either jumpstart these cells or just replace em with matching battery cells that are totally available to buy new but requires above average soldering skill and being very careful with correct polarity of each cell matching the original system exactly (positives and negatives in the correct order). Taking photos/video and notes of the current setup prior for good measure with electrical work.

good video man!! :)

I used this receiver for about five or six years and now I’m selling it, but I cannot remember if it came with a manual or not. Besides, a short explanation of instructions was there actually a complete manual ?

My doesn't charge any more. It only workes while plugged. :(. And it's new. I mean I bought it while ago charged it Tested it and it worked good. Nad now on its second use battery doesn't charge:/

I have two and it sounds like your battery sucks

Hello, please if someone can help me with this problem with my aiwa exos 9 battery, it suddenly stops charging, I went with it to a party where the battery lasted about 7-8 hours as usual and when I got home it didn't it still charges at all, that is, it's not as if the battery is dead, I suspect that a sensor has broken something and that's why it doesn't charge anymore,

These are the very definition of POS! Battery problems, can’t press the display, sometimes wont even work while solely plugged in. Aiwa was aware of these issues, I purchased mine when they first came out. Then Aiwa sold company! I am going to take apart my battery and replace cells. Aiwa or whoever owns them better pray it doesn’t start a fire and burn my house down, my insurance will sue the shat out of Sony or whoever owns them now…

My battery lasted two months. AND battery was jammed. Wrote Aiwa and they did nothing

sorry bro but that shit is rocking sounds good af!!!!!!!!!!! hope they can make you whole

How has it held up all this time?

It seems like the internal prong assembly that connects with the external charging plug is loose and sometimes I can get it to charge if I get it in the right spot but that’s not even working anymore. Any suggestions

Watching on my television. I heard you say "Popping Sounds" from the equalizer? Me too, keep the plastic on🎉

Used mine for a few years but the battery stopped recharging at all (not as gradual of a decline like most battery devices). I'd often use it for movies too. I love some EQ tweaking but I wouldn't risk maxed out all EQ + Volume on a speaker for too long. Some have DSP software that prevents overload damage but for longevity sake I try to keep max vol around the 90% range. One surefire way to damage most speakers is an external amp maxed out - boom. High quality / high watt subs and mids can take it and survive but the tweeters usually pop first in that scenario - all highs gone.

How much money Your sound system Total sate up ? Because I interest your set-up. I'm from Indian ❤😊

iam jealous

Bro you selling them? I’ll purchase even if the beat up

God speakers.

Aiwa era la vieja escuela como los equipos que tengo aqui en mi canal 👌

How match price

If I wear a 10.5 jordan what size would I get in these a 44 or 45?

czcams.com/video/dechvhb0Meo/video.html

You are the problem,son!😱If you push any amplifier too much,it will quit on you! I hope you get the message!Easy on the volume/equalizer!Fool!

Ото жакшы

Can you connect this to a pc?

Does the 2022 saw changed from the 2016??

Would you buy it again? Thanks

I got mine 2019 still pumping great.2022 🙃 still going strong want to do an update sometime this year.

*Probably one of my most used **MyBest.Tools** cordless tools. Plenty of power when used with the 5.0Am Lithium Ion Batteries. Awesome cordless circular saw. Would highly recommend!*

Ar your subs still running hard?

You got a great deal I got these when they came out for over a thousand

Fuck your stupid fucking music !!!!!!!!

Boss tool 👍

废话多多

I just bought one today

480€ actuell. Best speaker for edm. Better buy 4. For the neighbours

Bruh lower or remove the background music. Its a tool review, not a rave concert

I bought one yesterday and I like it. As for the plastic on the right. You can add a flat screw on the front bottom and it will hold it in place very well...also I added a small L bracket on the plastic towards the back to hold it in place even more. To me you have to just be creative with things like that. And it will suit better.

@Amor Baeza -Okay, I had to stop watching at 5 minutes in, when you said you had not even used it. Come on. You are dirtying on it for things that are not even an issue and you had not even put it to the test. You say you wished the splash trays were made of aluminum when they don’t need to be. Those are made to come off easy and be stored when not needed or to make the saw a smaller foot print for stow and travel. They are quick release that don’t need to be (shouldn’t be) bolted on. Yet you yank on the side one, it pops loose and then you say something about it “falling off”. No, you pulled it off. I never had an issue with these “falling off” during use of the saw. You even say they work fine and do their job. Exactly. You fiddle around with the two locking pins like they are not working and cheap but that because you don’t even know how to work them. The “storage” rubber straps, that you again don’t know what they’re for, you talk as if they are cheesy and not able to hold much. Hint; they are for holding the rear splash shield to the backside of the unit when in the upright position for storage or transport. There is another rubber strap to hold the slide table extension to the side splashguard. Worst of all you complain about the “cheap plastic” D handle on the saw head. You say that it feels sharp and that it may break if you drop it? What?? There is nothing sharp about it and it doesn’t feel like cheap plastic. I can tell you I used to know someone that was so bad with his tools. He constantly broke things since he just threw them in his truck bed (unsecured) and drove like an idiot on the road. He broke all sorts of tools doing this that I had never seen broke. He later owned this same saw for a many years and never broke any part of it, definitely not the handle. I used it a few times and I never had an issue thinking the handle was sharp or otherwise uncomfortable. Maybe my hands back then where nice and rugged from working them hard everyday. You complained about the stand. The stand may look less heavy duty than others stand but even this we never had any issues with. No breaks nor instability issues and it was lighter than the previous model that I owned back in 2008. It was also a lot easier to set the saw up than the older model. You really should take down this video as it came up in my search for this model and it’s an unfair assessment of this tile saw. I recently purchased a used one of these for a small project, since I had great experience with it years ago. Before that, when I ran my own remodeling company in the mid to late 2000’s, I owned the RIDGID 10” saw that was the model before this one (maybe 2 models before this one?). The whole things was much heavier (including the stand) and it really didn’t need to be. Something I realized after using this latest one. That one I owned from 2008 was dropped and broken by someone borrowing it. The thick cast aluminum arm for the motor/saw head snapped revealing a hollow core. The arm was not a “C” beam like this current one but completely tubular and bigger in girth. I actually thought it was solid core. One it broke in two, I saw it’s weakness. It had no inner support ribs. This latest model is a “C” beam with open Channel on one side that lets you see plenty of inner webbing cast into it. Much stronger I presume. Although, not going to drop it to find out.

I have an Exos 9 and I loved it until one day the battery just stopped taking a charge. It sucks because I cannot find battery replacements ANYWHERE online and Aiwa said that they don't know when they are going to get them in stock, which basically means that my unit now cannot be used portable... which renders it basically worthless. That said, the Exos 9 sounds better than any other portable speakers in terms of quality I've ever heard and it can also get loud enough for pretty much any purpose. It's just a damn shame about the battery though because more and more people are having this issue.

I purchased mine around 3 years ago and is it did the same thing yesterday I was listening to music loud in the backyard while I was doing yard work and it turn off by itself while powered, cause it was already low in battery. I had to wait a whole day for it to respond when I connected it to power. Maybe an overload protection?? Now, one thing I did was cranked the 2 bass bars to the max for the first time since I was all over the yard and I wanted that bass sound. I usually se the bass EQ to one bar down from the top and 2 bars from the top the second bass level and never had an issue. Again first time I did crank both bass Bars to the max and it did this weird defect or it could be that I was listening with the volume almost to the max. Either way that sucks. I will try again with different volume levels and not so high eq bass levels and see what gives Other than that, I don’t think there is a Bluetooth speaker out there than can outperform this one and if there is one, I need to know about it. The EQ is key in this thing.

The plastics are just for water runoff. You did a review and you don't even know how the saw functions. I wouldn't hire somebody who doesn't know how to use simple rail latches. You are not experienced enough to do tool reviews. Your lack of logic is disturbing.

Can this be used with self tapping screws?

polk audio signature series bought klipsch Rb81ll What does it sound like if I put it for the back?

The thing that sucks is that replacement batteries are.not for sale anywhere and when your battery dies (and it will) you can't find a replacement anywhere.

1000th sub here bro I had to make it happen great vid :)

Purchased these to work in love these

Can this thing be used in Malaysia? Does it have dual voltage in it?