Video

I am broadcasting to facebook and i have exactly the same issue as this stream, video pausing, did you have a solution?

good tutorials, only if maybe can show us how all these affect the voice as an example.

This is so smart! I’m looking to add a wireless to 2 in, to try and get both mics recording separately. Would that work here too?

Anybody know how to control the bass? I was in church yesterday and they sung and the kids love their own bass and they really went deep. On church spearkers it sounds fine but on the stream the bass just cracks up and sounds like noise... How can I rectify this for the next time we have a singing group? I basically want an equaliser just like on a mixer

OK, I'm convinced - I don't want to be swatting flies with a sledgehammer - I'll use a Dremel Tool.

Man , huge . Let me fly you to Vegas to setup my studio ! Having so many sounds issues. Thank you thank you

Thank you

WARNING, this device doesn't have an audio out to monitor, why did BM do this? to complicate things. This is a switcher and nothing more. I rather run sound independently than jury rigging a flawed product. Good review, but people don't need to buy this if they don't want to waste time with the flawed audio setup. I own the Mini Pro ISO, don't even use all the functionality and must bypass the audio completely since there's no way to monitor.

the S3 biggest issue is Presonus don't test the firmware enough. They've rolled out firmware several times that hard crash the console. They also back pedalled super hard on adding insert fx - they 100% through there hardware had more hoarse power than it had and as a result they never delivered on adding anything to the channel strip insert that's actually worth having.

Sweetwater still sells the PreSonus StudioLive 16R at $899. Plus you can use Studio One with it.

One word. Livetrack 20. That’s two

i connected my atem mini pro and the frames are just to slow ,how do i fix this ?on facebook

Yes. I am. using the key given tha youtube or Facebook but still.

Good morning. I have challenges streamin my new ATEM mini pro

So your signal splitter loses no signal, and it's passive? Do it generate power? Quick, you finally found free power! Sheesh

I send a 32 channel Digico console into an Atem for a full stage worth of mics and direct inputs, works fine with same cables x

Would I be able to use the unbalanced 1/4" Jack outputs from a dual wireless mic receiver into the Atem Mini Pro 1/8" mic inputs? If so, will there be any difference in using a stereo cable vs a mono cable (1/4" to 1/8" jack)?

I had no ideal the eq existed. I am so glad to have watched this,,

Thanks. Needed to know the airflow.

Thank you so much. I am using the ATEM Mini Pro in a church environment and the music we were streaming was embarrassing. The knowledge you have provided will help a lot.

Here I am watching right now 😁😭I love CZcams

Excellent tutorial. This all coming from an audio guy!😂

My is my zoom giving a hiss sound or floor noise when i connect my rod pod mic via xlr? 😢😢😢😢

Anyone know how to downgrade the firmware on the RM32AI. It used to work great until we made a the last firmware update.

After watching your video, I think I've made up my mind to install the foam board. No time constraints and nowhere near the mess of spray foam. You definitely took that hit like a champ. I'm afraid my video would of had a few " beeps" in it 😂

Great video. Thank you. I have been struggling for days with getting rid of a hiss / buzz / humm when running a Zoom F6 through the ATEM. If you have time I'd love to hear your opinion of it: czcams.com/video/TO8eJNq6l28/video.html

hi i just bought one for my mixer the sound comes thro brill no lag but if i speak into a mic i get lag about 1 second any ideas mate

Well done sir. I'm a carpenter. I'm looking for ideas and products. It was my good luck to watch your video. You were the third person to use the word hack but you did the most thoughtful approach with top quality results.

So you could use this by its self for a small show(30 ppl max)…w/o a mixer???

Hi. I got a new 4k splitter so i can display to 2 projectors from my atem mini extreme switcher. All went well until about 2 hours of show, everything went black. Initial suspect was that the new splitter caused ground. I recently checked the extreme and it did detect all HDMI input but the output resolution is not okay. Audio and recording is fine. One suggestion was to change the pins of hdmi out. I'm not sure how delicate the pins are and there's no ATEM service center. I'm not super knowledgeable about this. Hope i could get a help from you or anyone? It will really be a big help🙏

Still trying to find a video that shows you how to record at home with these. What I mean is how do I run it through Studio One like a regular interface. Like opening all channels in studio one and recording via the DAW, instead of the studio live program.

Hey, are you still available for audio consult? I need questions answered before buy an ATEM

Cool we’re can I buy one

Now if you want to do a live recording where you have speakers going into the room as well as monitors coming back to the stage etcetera, will this same scenario work in this case?

Thanks for a great video you convinced me not to do it. Lol thanks again great video.

That was helpful, thanks.

The latency of the Airfly makes its operation with FocusRite's Scarlett impossible to use. yes it connects but Ryan try using it and you will see for yourself.

Thank you!!! Great video!!! I have a quick question... I currently use the Behringer Xenyx QX1202usb but when I got to the sound card M-Audio M-Track 2x2 (C-series) the voice changes pitch in my live on streamyard... any idea how to fix that??? If I use the Mtrack alone doesn't happen but I want to add instruments and more mics that is why I use the mixer... when I use the mixer usb alone, I can't hear the guest on our stream not sure why... help please!!!

it is built solid, the first thing that happened before I could even get it in the rack was my dog knocked it off a table about 30" high. thankfully nothing fucked up

I did the same thing with the AirFly Pro and the headphone output of a UA Volt 476 audio interface and it worked fine except there is a visible audio lag if you watch a video. And if you plug an instrument into the input, the lag makes it impossible to play, even when monitoring the input directly before it goes to the computer.

Hey, thanks for the video. I have the same setup plus the ZHA4 amp, H6, sm58, and xlr cable are from Amazon basics. However, I have an issue with noise more specifically I can hear the radio in my monitors. The radio disappears when I turn on the PAD button but again there is a white noise that is very distracting.

Dude I just got this. Thanks for posting

What about HDMI

Could you go REC out rca/jack from the mixer into the line in jack adapter scarlet solo?

Awesome but how do you do this with an EURORACKUB802 Barringer mixer & 2 interfaces? One interface in, one out (Tascam MK122-144 in & ART Dual Pre Project Series Out) using VMix not OBS and also USING A Panasonic WJ4000 Special Effects generator TO PRE-SPLIT SCREENS BEFORE Going into Vmix (PIP).as well as TO SELECT & Switch Cameras & Audio BEFORE Either audio or video goes into The inerfaces or computer & VMIX by going thru the WJ4OOO before VIDEO or Mixer audio GOES INTO Computer or into VMIX and this arraignment/setup/array be equipped WITH A SWITCHABLE SELECTOR TO An old Marantz Paper-wound capacitor Model 2226 We're using as a Monitor either by open Speakers or via headphones from the Marantz ?

Amazing! still learning, How the Whirlwind PCDI helps to output to camera? (since it outputs XLR?)

Hey Ryan and anyone that used these before. Can the apron be plugged into a 2 way radio VOX headset port and it the send and receive signal to the headphones and from the mic when you talk? Wanking to use it to connect a set of Bluetooth Headset with mic for use when riding my motorcycle to talk between radios hands free.. I already own the radios so don’t want to spend the big money on another pair made specifically for that. Thanks in advance.

Did you ever find an "insertion follows playback" solution for fairlight?

very sad to hear these video comments. Every system works similarly except Protools. Protools is extraordinarily illogical and unintuitive. To say that shift or option + scroll wheel should behave the same as Protools and it is frustrating that it doesnt , assumes that Protools syntax is correct. Protools is an extremely underdeveloped, unreliable , unimaginative, unintegrated, appropriated software . Update, bug fix, crash report, automatically find and relink, would you like to go to the avid store and download missing plugins, error 3.02.00.110, pleas wait for an operator - your call is important to us.....

thank you so much. Great tutorial. definitely trying all you mentioned