Video

best video ever !

Remove electrons and switch off the bond. The Voltage Polarisation Process.. When the gas processor ionises the air to remove electrons. This air is mixed with water to make water fuel. When this water fuel is ionised. The processed air with missing electrons gives the oxygen a very strong electron gravity and is used to remove electrons from the water molecule. Causing a polarity flip and so splitting the molecule.. It’s a triggering process! He said, This is the voltage polarisation of the water molecule.. The covalent bond is equal to the two shared electrons and if you remove these electrons. The oxygen atom will flip back to a positive charge instantly repelling the atoms.. Processing the air in his air gas processor he removes up to 4 electrons from the oxygen in air and uses this as a tool by dissolving the processed air into the water in the way air is dissolved to keep fish alive in a fish tank.. This is what he called his water fuel.. If you don't make the water fuel first then all of his inventions will not work as described.. I hope this is helpful to you.. You must understand when he says combustible gas atoms he is always referring to is the oxygen in the ambient air. Combustible gas atoms are not hydrogen and oxygen. Also In all his patents he refers to electrolysis as the prior art The voltage polarisation of the water molecule is not electrolysis. It’s a set of conditions set up to trigger a reaction. Like I said above he strips the electrons from the oxygen in air in his small air gas processor and keeps the oxygen atom stable with light energy.Then dissolves this prepared gas into the water tank. This is his water fuel. Now all of Stan's arrangements will work as he stated. When you use the VIC to charge the cell up to the dielectric properties of water without dielectric breakdown you excite the water molecule and also the dissolved oxygen held dormant by the dielectric properties of water. When the electrical stress re-excites the processed oxygen from the air. The oxygen has such a larger attraction force over the two covalent electrons it removes the shared electrons and as Stan says for every action there is an equal and opposite reaction. When those electrons are removed the oxygen atom swings from negative to positive charge and in so breaks and repels the atom structure. He says 5 seconds of excitation you will get 90 seconds of production..In turn the electrostatic fields used to ionise the water and combustible gas atoms otherwise known as water fuel, attract the now separated atoms towards the electrodes. This is not electrolysis, it is the birth of a new technology and now you know!! Any questions just give me a shout.Hope this helps you with your interest. Thanks Tony. czcams.com/users/clipUgkxIobrQrZVXglOaAgxttBYfTvPzTFwXdca?si=qET09j2icEAxubA9

Remove electrons and switch off the bond. The Voltage Polarisation Process.. When the gas processor ionises the air to remove electrons. This air is mixed with water to make water fuel. When this water fuel is ionised. The processed air with missing electrons gives the oxygen a very strong electron gravity and is used to remove electrons from the water molecule. Causing a polarity flip and so splitting the molecule.. It’s a triggering process! He said, This is the voltage polarisation of the water molecule.. The covalent bond is equal to the two shared electrons and if you remove these electrons. The oxygen atom will flip back to a positive charge instantly repelling the atoms.. Processing the air in his air gas processor he removes up to 4 electrons from the oxygen in air and uses this as a tool by dissolving the processed air into the water in the way air is dissolved to keep fish alive in a fish tank.. This is what he called his water fuel.. If you don't make the water fuel first then all of his inventions will not work as described.. I hope this is helpful to you.. You must understand when he says combustible gas atoms he is always referring to is the oxygen in the ambient air. Combustible gas atoms are not hydrogen and oxygen. Also In all his patents he refers to electrolysis as the prior art The voltage polarisation of the water molecule is not electrolysis. It’s a set of conditions set up to trigger a reaction. Like I said above he strips the electrons from the oxygen in air in his small air gas processor and keeps the oxygen atom stable with light energy.Then dissolves this prepared gas into the water tank. This is his water fuel. Now all of Stan's arrangements will work as he stated. When you use the VIC to charge the cell up to the dielectric properties of water without dielectric breakdown you excite the water molecule and also the dissolved oxygen held dormant by the dielectric properties of water. When the electrical stress re-excites the processed oxygen from the air. The oxygen has such a larger attraction force over the two covalent electrons it removes the shared electrons and as Stan says for every action there is an equal and opposite reaction. When those electrons are removed the oxygen atom swings from negative to positive charge and in so breaks and repels the atom structure. He says 5 seconds of excitation you will get 90 seconds of production..In turn the electrostatic fields used to ionise the water and combustible gas atoms otherwise known as water fuel, attract the now separated atoms towards the electrodes. This is not electrolysis, it is the birth of a new technology and now you know!! Any questions just give me a shout.Hope this helps you with your interest. Thanks Tony. czcams.com/users/clipUgkxIobrQrZVXglOaAgxttBYfTvPzTFwXdca?si=qET09j2icEAxubA9

Wow, I apologize for being so forthcoming, however, I must say i think you are a beautiful person and I am enamored with both youre handsomness and your interest in research and experimentation which I also have a passion for. I hope you figured out the correct protocol for this process by now. I am smitten.

Remove electrons and switch off the bond. The Voltage Polarisation Process When the gas processor ionises the air to remove electrons. This air is mixed with water to make water fuel. When this water fuel is ionised. The processed air with missing electrons gives the oxygen a very strong electron gravity and is used to remove electrons from the water molecule. Causing a polarity flip and so splitting the molecule.. It’s a triggering process! He said, This is the voltage polarisation of the water molecule.. The covalent bond is equal to the two shared electrons and if you remove these electrons. The oxygen atom will flip back to a positive charge instantly repelling the atoms.. Processing the air in his air gas processor he removes up to 4 electrons from the oxygen in air and uses this as a tool by dissolving the processed air into the water in the way air is dissolved to keep fish alive in a fish tank.. This is what he called his water fuel.. If you don't make the water fuel first then all of his inventions will not work as described.. I hope this is helpful to you..

I got that same supply! :) Boy it hurts when you get nailed by it ha ha! Did you try it on Stan? I think I did, but since we lack the ability to "safely" probe it, I didn't go too far there.

David, hello. Have you done much with the Meyer HHO experiments since this video?

9 years later it still seems that the resonance guys show the Gas but never measure it …

Are you still alive?

circuit diagram please, ur apparatus details please

thank you

If you have a large hydrogen generator like that with high voltage I would imagine it could be dangerous if you have any poor connections. large volume means a large amount of highly volatile gas, why not start with a small scale experiment.

U still alive famo ?

I am glad I found your videos, but sad its 10 years later.

I believe Edward didn't understand your point, because he's talking about water cell as a capacitor + resistor and you're talking about not using the transformer, but just coils + water cell. It seems that the purpose of the transformer you talk about is multifold. For once, it serves the purpose to isolate the wfc part from the ground, as Edward said, so you can have both sides of wfc capacitor charged, producing the full effect of ionizing the water and make it easier to break water molecules, without much current flow, which saves power. I've seen a lot of people doing this process right, showing amp flow of zero (or really near zero) and voltages going very high (tens of watts of power max). The second purpose of the transformer seems to be to reset the DC offset, which is present in the pulse train, in the circuit before the transformer (the dc pulse generator). If you studied Meyers papers, this pulse train is never crossing zero point, it's always either positive or negative, but never crosses zero point. When you bring such a DC pulse train to that transformer, it triggers the resonant oscillations by charging the wfc capacitor when the dc pulse nears the max value and discharging (and oscillating between coils) when dc pulse is at its minimum. Those oscillations you can see on Meyers graphs on each 2nd part of the oscillating period. It is my belief that the purpose of such a signal is to 1) charge the wfc capacitor up to start ionising the water molecules in the wfc and 2) start oscillating in resonance with wfc to trigger covalent bonds breakup. Without that transformer, using only silicone rectifier/switch for the pulsed dc signal, you're going to be left with the dc offsetted pulsed signal, which never crosses the zero point, like Edward said, which means you're effectively doing Faraday's electrolisys, using the current and wasting power, instead of vibrating water molecules in resonance to help them break apart to their atoms.

What happened to u , were u killed by the elites?

good morning. Could you share the circuit please jato90k@gmail.com

Is that a power supply transformer from a microwave oven? Wjy is it that everyone posts CZcams videos, doesn't explain so all people would be able to replicate it at home. Make a neat and simple version, explain it, help people achieve the goal of making hho the most efficient way,

Well done David. Very good to see such intense upward spikes. Do you intend on gating your output?

Have you heard of irondmax

do you wanna chat at Bradley lude, find me on facebook, playing the didgeredoo in the snow

Pretty neat but 500volts at .5amps is 250 watts. It's not working at 100% efficiency so it's using more power than that. OUCH.

¡¡¡CUIDADO CON LA ALTA TENSIÓN, QUE SE TE PUEDE ELECTROCUTAR EL PERRO...!!!

0:28 hilarious

All of the ball flow meters will give you a low ball reading as the gases are a bit lighter than just air gases but it's okay to have a low ball reading as then we know we reading gas output on the low end of the scale. Thus any reading we get is good for use as it would be a low reading of the actual gas output that is taking place and it is something we can see and measure in real time. I have two of them that I use which are calibrated for LPM readings. I use them for I know they are giving me a lower reading than the actually amount that I am producing so when I run my error calculations I can basically ignore the lower readings for I already know the reading are on the low side with the ball type gas flow meters I have.

1780V Gas production Too little Pulse sequence + Gate will achieve this effect

from what ive read ya need a high frequency generator and a pwm... the idea is to bring the reaction to resonance...

are you still working on this?

enough Anon suggestions in your videos?

David, still working on this?

my email is mihirsahu99@gmail.com pls explain yhe circuit also

i simply can't understand can u pls explain the circuit and system in an email to me pls.....

I quite enjoyed that. Nice song too :) looks like a lot if fun

Dude you are a "dead ringer" for Shia Labeouf!!!

You can use voltage divider to measure higher voltages. It can be built easily by yourself.

I'll follow you! I need to get a patent, so this is info is perfect thanks!

Good work..

from many such videos on youtube yours gives me so cool explanation, thx dude.

Thank you for showing this!!

Dude your getting closers ha! Good on you and well done! don't understand why this only has 2 thumbs up!? This is good! you got a website or forum we can check out more about your progress? Cheers Ant

Now how did i miss this excellent Video ? Neal Ward

Remember he got us into VIETNAM, he promised a nebulous assistance to south Vietnam to push out the threat of communism. You have him to thank for killing thousands of young ( some were only 16) men during that war and one of those young men was my father.

great, i want to share you my own experiment in using water as fuel, i `ll send you video exposes electric generator work on water 90% and gasoline10% and hope we could develop final product together. if you like that please let me know Mohsen Ali Mohcen.ali@hotmail.com

go ahead

Really it's not an open circuit as the water is to be viewed in the circuit as a resistor. Meyer himself says it being used in the circuit in the form of resistance and gives it this abbreviation Re. The real resonance takes place between chokes and in a series set up as shown to us in figure 6-1 it's the two ending chokes at opposite side of the winding. Thus far I have been getting some of the best results the world over of getting high voltages to the cells while restricting the flow of amps just as Meyer talks about doing. Right now I am up to 5.8 kv at 25 ma but I have to reach around 7.5 kv before I reach what I have been calling the, "Ionization Threshold," a process where the atoms that make up the water molecules will start to eject their electrons and in the process the bonds of the water molecules are thus broken down.

Nice to see the 9xa and your work with.

This man is a genius.

Voltage X Amps X Seconds X Milliliters = MMW (milliliters per watt per minute) this will tell you the efficiency.

There are some flow meters out there that are made specifically for HHO. Check out delvis11's flow meter.

Well said!