Video

Great to the Point!!!!! 🙏❤

What's the name of the make to look for the dealers

Great video!

It was going to cost me a $100 service charge + parts + tax. Watched your video. Said I can do this. Bought the part I needed, fixed it myself and it only cost me $15. Thanks.

AWESOME VIDEO!!! Saved me some money🙏❤

U r a my hero!!! Thank u. I’ve had this problem for awhile. Just left it alone till my sister said her air gap was shooting water. Told her leave it. She said I was crazy so I went on you tube and found u. IT WORKED!!! The cable did the trick. I had to go through the sink hole up through the air gap cuz it was clogged the other way. Thank u again. 🤗🤗🤗

I agree! I just ordered new bolts, and a new 3”Gasket for my Toto toilet.

#1 low on charge #2 blower motor stops running #3 AIR FLOW thru your ducting, could be a closed damper or collapse duct, or a clogged return and or supply vent #4 not enough air flow flowing thru your system #5 blower is running backwards upon install and no one cared to check #6 condenser fan isn’t running #7 restriction in the refrigeration system, or any non condensables and or moisture in the system. Before even looking at the refrigeration system everything else must be checked before diving in the refrigeration system. People tend to overlook the basics and in my opinion the filter doesn’t truly effect the unit to the point where it starts to freeze over, although a dirty filter can restrict airflow, and cause a drop in CFMs, its the least of your worries.

So bending a fan blade will throw it out of balance? That doesn’t make sense.

What's funny about my groaning Goodman condenser fan motor I bought a new one and same noise rumbling crap when I give it a shot of water from the house it quites right down motor runs at 103 degrees so idk what heck is wrong

I’m told in another video that if you use a step up in the extractor, it will actually work. I’m counting on it cause I already bought the damn thing.

This is a US-only type of bolt

I bought this lock and the original key DOESN'T work, yet I didn't not change the key. It's not rusted or seized. It just won't work. bummer.

صديقي العزيز شكرا جزيلا لك على مجهودك الرائع كيف لي احصل على مقطع فديو تفصيلي عن سيستم التوصيلات والقطع الالكترةنية لهذا الجهاز

Always check drain pan too. Had many customers not even notice the pan under it full. Alot of stopped up drains😊

A good hvac guy woulda found that wire cut into before even pulling the meter out

Very helpful!!

Just fixed three y o GE after watching half your video. The control panel alone costs $175. Temperamental things, these LED boards.

I am working on my shower at the moment, hoping I can get some answer from views. It is Ok to use a hammer to lose the cartagena?because it is too tight to open Thank you.

Thank you for helping me DIYS. If the sleev, catrige is tight to open, is it ok to use a hammer to losen it ? Will this cause more damage?

Thank you so much for posting this. I have zero plumbing experience. You just made me look like the man in front of my wife and probably saved me a few hundred dollars paying someone else to do it. My eight year old son assisted me. Now he knows what to do if he runs into a toilet that doesn’t refill. Thank you.

Man I'm new in this trade You make everything so simple and understandable Sam #1

Very good video I had the same problem and would have called the AC guys out but I watched this and found the problem

Great video. One correction. It's not the sock that knocked off the belt. The belt comes off when the spin cycle is lopsided.

Please don't let your coils get that packed with lint. Clean them quarterly or biannually at a minimum. It kills the cooling ability.

super badass, thank you!

Its 110 degrees there?? Get that sucker running fast lol

Great how to video. Thank you for sharing your knowledge. I appreciated it. Signed Sherri , Marysville, CA.

i think this was the video & explanation i was looking for. the air gap keeps leaking water from the dishwasher. so it’s possible the air gap hose needs to be replaced or the rubber hose to the garbage disposal. thank you

Real troubleshooting right there! I don't even have a broken fridge light.

It took me 5 minutes to change this valve. I found the part on Amazon. Wonderful video.

where can i get this tool? what is it called?

I did exactly what you did, I even found some old cable wire lying around. The first time I used the dishwasher afterwards water came flowing out of the air gap at a much higher rate than previously, but the 2nd time around there was no water. Not sure why but I like the results. Thx

What is that tool called

Thanks, that is more simple than I thought. But what if the cable came completely off the drum so that it is not attached at all. Is there a way to reattach a new cable to the drum?

I have a few deadbolts to drill out this weekend. I watched other videos of this and this looks most effective.

Why couldn't you check voltage to fan before you changedtl the capacitor

What’s the name of the tool dumbass

Thank you!

In the van watching this haven’t touched a furnace in decades

Perfect video! I just finished this repair on my washer. Thank you so much for the clear, concise info!

Thank you for the in-depth explanation of every little thing you're doing! I've got a few years as an installer, but I have really no service experience, so this is all crucial, lol.

What if your breaker isn't tripping at all? But nothing is working, the fan, heat or Ac.

Thanks a ton. My drive belt was snapped but lowe’s had a belt for $15. Back going in no time

Thank you thank you from where can I purchase this key?Thank you!😊

Thank you Sam. You saved my ass here.

Thank You I learned more than what I know but don't get why the door and the track weren't clean while apart.

When taking out the centre string its best to tie a different string so it goes through to make it easier when restringing

Chauffage électrique ou gaz ?

this is the best video i have seen about fixing this issue