Video

Looks like complete overkill to me. Also, why transfer from the bottom where all the trash is? I use 1 slightly lower additional tub to to my trailing tub with a small spillway. My water is way cleaner than that.

Add 1/8th cup or less of pool flocculant to settle the silt, it last and last, one quart does a medium size pool. Environmentally friendly. Gravel yards and big mines use it. It's cheap. About $12 a quart. Keeps your matts and gear from build up. Increases pump life too.

ur getting pressure off the bottom which has the weight of the water above ---- great idea

Very helpful video, thanks! Are those the new OSHA approved, steel toe flip flops? 😁

I bought one for my wife.Everything put together pretty good but the front wheels were I had to do a front wheel alignment.

Sunbelt Rental rents Hilti hammer drills. Why buy one unless you’re going to need one over and over again.

Dude…first off the NY accent. Music to my ears. What part of AZ are you at? I’m in the Tucson area and about to buy my first claim. Anyway, great idea for the Bernoulli connectors. So I built a suit like yours, with 4 tubs instead of 3. The 1st and second tubs have micro filters splitting the tub basically in half. I’ve found I can run pretty much all day like that, and I remove sludge when me and my son take a lunch break. I’ll post a video of my system on my new channel. Cheers!!

*Concrete

I like the way you think. That's some dirty water.

Harbor Freight is Cheap Chinese Garbage ,Milwaukee is the way to Go ! Cmon man !….Nice Workboots by the way🤣

That dog in the background would drive me nuts.

Is this manual tranny easy to use? I read on a comment about the Rhino that if you have big feet that you'll have trouble shifting the gears. I have a size 11 foot and this is the only reason i haven't bought this particular model yet. What's your opinion on this ?

What a great idea.

This guy sounds like he isn't a native of Arizona

a little less talk a little more actiom

Great job thank you for sharing your project How much did you pay for the foundation work?

I think using a reciprocating saw was really a good idea as you get a vibrating effect without using an offset weight to achieve the vibrating effect. That is, now you do not have to be reliant on rubber mounts, as opposed to using solid mounts such as springs and hinges that would account for the reciprocating motion. Good idea, good video.

Anyone getting a building with concrete done like this ask concrete guys to do a 2"drop next too the framing helps with keeping water out and a slope by the garage doors

Can I come have a beer and joint with you?

You still have these? Are they still running? Would be cool to see a long term review on one of these

Milwaukee all the way 👍

Great video!

Where did you buy all the pre fab to build it?

I think you erred and purchased the hammer drills that didn't have the SDS function. I've had one of the HF SDS drills and used it to drill 2 inch holes in a piece of ledge to split it for removal. It worked fine and still works great years later. If you had purchased the SDS drill, instead of an inpact drill, I think you would have been happy.

Versa tube kits are way too expensive, can easily get a building installed from someone else and still save a few grand compared to versa tube . Way too expensive for a do it yourself kit. $17,900 for a 30x39 with 10ft walls. Just payed 14k installed for a 30x40x10 . all vertical and the same metal specs …

You couldve done yourself a big favor with some sill seal under those base rails

does 3 tubs really keep your water clean? I have 2 big tubs with smaller tubs to catch tailings similar to yours. I cant keep water clean what so ever.. After a bucket of running dirt, the water is too muddy to see what is going on in the riffles.. Does this really work?

Too lazy,

Thanks for sharing the tips you figured out on the way. We're putting up a 30x34 kit.

Thanks for your video amigo i love it stay the course enjoin seen it i will share it

Where is the next video? I want to see the finished product.

Holy need tricks of trade impact drivers socket tip for socket for anchors .agent tip for screws Philips tip for pan screws

20 buckets and not a lot of gold .good job anyways wow ! Hot tub time. Lolol

Mongoose. If you don't mind me suggesting this is something that will help you and speed up your process while you had it all set up and measured out just should have went through with your hammer gun and just put a little dentation at each hole all the way to the end and then move your face out the way so you can drill your holes all the way through that way it would have speed your process up and you can blow everything through and one main issue a lot of people forget is to drill all the way through your slab I don't know how thick your slab is but it gets a better anchor when it pulls up from the bottom up instead of inside the concrete I hope this was helpful and you're doing a good job keep the good work up

Just buy a gallon of clean water don't drink use it on final clean panning at least when filming

Did u set anchor bolts for the ends of the columns when you poured the slab?

The title of your video states you are building a 30" inch X 40" inch shop. Shouldn't it be 30' foot X 40' foot? Measurement skills are a necessity in the building and trades industry.

I notice you have anchor bolts about every 5 feet, it looks like. I had a shop installed recently where they only put anchor bolts maybe every 10 ft, and that concerns me. I already know they were a bad installer, because they put one wall up off level, and had to straighten it before I paid. Can't get anything good from anyone anymore.

This is the only video, I can find on the internet regarding the RDH GOLD BUSTER2

Nice little setup. Greetings from sunny Jamaica.

I just ordered one of these Gold Buster

Ok I see, you have 2 pumps. Cool

How come you have the hose duck taped like that?

Never mind the drill, I just want a pair of those rad flip flops.

Hello What is the thickness of the concrete slab? Thank you

If that was 15 buckets I'm on a sweet spot cause that looks like a Colorado 2 bucket cleanup!

Sweet setup!

Thanks for the video. Will go look at some of your others. I just bought a 2021 Rhino 250, and am looking forward to assembling and modifying it. Content like yours is much appreciated!

Did you have to have that sprocket made

I’m just starting mine! Doing a 21x27 I just finished the site work but will be doing radiant I can’t wait to get it up