Video

That could be too it says filters should be replaced every 6 months 3 if you have pets.

FWIW the manual mentions specifically that you can use "a ratchet or impact driver" on the actuating screw, provided you don't exceed 30 lb-ft of torque.

Is it worth it to you? A few questions can you do it your self? Do you have the tools? Have you looked at another shop?

Thank you for your question. This is what i was able to find. Since 1st June 2022, update Autel MaxiCOM MK808 can get endoscope function. So after you update the Autel MK808, you can use it with the Autel MaxiVideo MV108.

Thank you for your question this is what I was able to find what year is your scanner. Since 1st June 2022, update Autel MaxiCOM MK808 can get endoscope function. So after you update the Autel MK808, you can use it with the Autel MaxiVideo MV108.

@@mr.fixitayala310 yes now I know...I bought one mv105 and it's working great with clean image.im really happy about it.

@@maximejette7674 my apologies for my late reply.

@@mr.fixitayala310 all good bud.

@@maximejette7674 but yes that maxi scope is one of the best. Out in the market.

Good question.. but it charges the dongo. For the computer, if you ever would need to connect it to the computer, it would be a USB. But the thing is that it's a computer itself.

I am pretty sure it would it seems real strong

Really? If only 30 ft lbs, we can easily turn with a 1/2 ratchet.

@@mrweisu Yeah really. The actuating screws threads were probably not designed for reliable operation beyond that level of torque. They made a point of stressing it in the manual, I'd heed the warning personally, no matter how easy it might be to exceed it.

​@@StilettoSniper30ft lbs is nothing.. even 3/8" ratchets are designed to go at least 100 ft lbs.. and I wouldn't use a 3/8” with that kind of bolt.. either a wrench or a 1/2” ratchet.. 30 ft lbs is the kinda torque you would use with maybe 12-15mm screws/nuts.. a 21-24mm screw can easily handle over a 100 lbs. Most cars lug nuts are about 17-22mm with an average torque rating of about 100 ft lbs and we've all seen tire shops torquing them to more than 200 ft lbs 😂... so it seems to me that that 30 ft lbs is overly cautious and maybe even impractical for the job

Thank you I have since done a 3.4 swap on it since the 3.0 engine broke down

No Poblem I will be doing another one. Just to make sure I did not missed anything.

You got me wondering so I plugged mine to charge it.. not sure if I do a video.

Hey Bud I uploaded a Video apparently I do have the software for the camera.

Thank you

Check spark plugs. Maybe one spark is not gaped properly and check timing thats more of the rotor and spark plugs issue.

1:55

It was the ERG valve wires

Son el mejor producto por el dinero si hay mas caros pero esto es perfecto cuando nesesitan ser mobible..

I agree I'm retired on very limited income

@@pirihern9329 well it's the best thing my brother bought a snap on and I am glad I bought this one insted of the snap on..

Hola Fernando yo creo que si pero no estoy tan seguro.

Muchas gracias por contestar voy a intentar ver si están en el mismo lugar

No hay problema si me avisas si esta en mismo lugar.

Is the blower working? And what did you had before? Is your house big? Some things that might make a difference

Thank you I could not get my words together.

On the fire wall Haha never thought of that maybe since I dont want fumes in side the cab

@@mr.fixitayala310 well I mean the carpet would be covering it alot easier than messing with extensions lol

@@jok3yjesu339 Haha yeah I dont think the carpet goes that high those fumes are dangerous

@@mr.fixitayala310 I dont know lol but I'm about to pull my rangers trans soon idk what I'll do yet I'll firgue it out

@@jok3yjesu339 I would like to see a video of how you ended up doing it... and if you make a hole Haha hope u dont use it on the rain or have to cross high waters haha

Check you lines from your break booster and in your throttle body. What engine does it have?? The screw from your idle on your throttle body the O ring goes bad. It could be a few things but look at the ones I mentioned

Haha glad it helped you man..

What was your issue??

Fallow the instructions from min 2.19-3.15

Hola Ricardo yo no quite el filtro por la rason que el cliente no me pedio un cambio de aceite pero si el carro es tuyo seria Buen momento de acerle el cambio yo use un codito que se puede mover oh yo no use cellador asi funsiono bien.

@@mr.fixitayala310 GRACIAS

Senal Devasurendra hey what's wrong with your car??

Mr. Fixit ayala, I removed all the vacuum hoses to take the plenum out, now when I’m at a light on brakes, I hear a high pitch tone. When release the brake and stomp again it goes out, also rpm jumps

Senal Devasurendra do you happen to have the book for this car. It would help you a lot sounds like one of the hoes is at a wrong spot check the lines from the break booster.

What code you came up with hope you find that leak those are hard to find

Mr. Fixit ayala its p2279

Yeah so that leak is creating a reading and there should be sensors around to pick up the reading and yes similar to my issue here where air is entering the system.

Neil Williams Hi Nail is your air box on the way?? Remove And u might be able to do it from the top mine had a lot more going on the top so I choose the bottom and I used a swible. You can wrap your swible with black tape so u have a little more control.

Haha gd thing you ran into this video. Was it the ppl at the auto parts no names. Yeah that's where it would normally be on top but not on this engine.

Yeah that's funny yeah glad I saved you some time. Some ppl actually do open the top.

Yes and in some cases on the lower bolt you might want to use three long extensions

Yes as long as is a 3.5. I made this video since the the thermostat is not on the normal location

@@mr.fixitayala310 do u know where the water pump for this car is

@@esgarza1486 Hello so the water pump replacement is in mid engine with the timing belt..

@@mr.fixitayala310 thanks

@@esgarza1486 you are welcome..

You are wellcome glad it was helpful.

45eno omg haha thats too funny about you moving the Computer and i was the filming person haha. And yeah I should have holded the phone vertical haha. Good catch.

Dragonboy Slayer glad it helped..

+Nicholas majkrzak glad this one helped.

Tosun Bay thats right it could bent it. In my case tge engine is trash. If you saving the engine it would be better to put a block on the oil pan and raise it from there.

+Keep it Real glad it save u some $$$$$ lol

+Christine Smith thank you for watching this video and taking the time to comment on it happy thanks giving.

+Ian Clark yup that's all. So simple and it works magically..

+Chuck Barry Thank you for ur comment and I am glad it helped you.

bco3504pir n OK problem.

Miron Briley good lol just make sure it gets everything out the way.. I used a paper clip my self but it got clogged up again so I used a nail that was able to fit in that nipple..

Imil Assaf glad the video was able to help thank you for coming back and leaving a message