- 8
- 303 356
Bot944
Registrace 10. 08. 2010
Using VCDS for MQB(Tiguan) to Reset Electronic Parking Brake
Used this process on my sister’s 2019 Tiguan SEL 4motion R line. Should be the same for 2018 and 2020. I believe all MQB cars Golf, GTI and Golf R. Possibly some other newer Volkswagen and Audi cars
Hook car battery to a trickle charger
Hook computer to a charger and plug into car
Ignition on
Open ross-tech vcds
Clear any codes to start
Pump brake pedal(idk if this is necessary)
-Select
-03 ABS Brakes
-04 Basic settings
-IDE03331 to start the change
Go back and do the brakes just as you would
-IDE03330 to finish and test the system
Refer to the ross-tech video that is out there for more info. Try this at your own risk, I am just trying to be helpful to people that are experiencing what I was
Hook car battery to a trickle charger
Hook computer to a charger and plug into car
Ignition on
Open ross-tech vcds
Clear any codes to start
Pump brake pedal(idk if this is necessary)
-Select
-03 ABS Brakes
-04 Basic settings
-IDE03331 to start the change
Go back and do the brakes just as you would
-IDE03330 to finish and test the system
Refer to the ross-tech video that is out there for more info. Try this at your own risk, I am just trying to be helpful to people that are experiencing what I was
zhlédnutí: 8 452
Video
GSC Zero Tick Lifter Warm Idle
zhlédnutí 499Před 5 lety
The car was warmed up and the oil pressure has dropped to a normal idle level. The tick has greatly increased to what I think is a normal level
GSC Zero Tick Lifter Cold Start
zhlédnutí 655Před 5 lety
Just installed GSC S2 cams, Beehive Valve springs and Zero Tick Lifters. Experiencing some pronounced lifter tick on a cold start. The springs were professionally installed and the lifters were bled down as per GSCs request. A warmed up video will follow this one.
Evo 8 Gates timing belt noise (warmed up)
zhlédnutí 3,3KPřed 9 lety
Took a drive around my town. Get an idea of the noise that it makes while driving and idling at operating temp. Also, pay no mind to the coolant temp gauge, it is malfunctioning, the car is running at the proper temperature.
Evo 8 Gates timing belt noise (cold start)
zhlédnutí 5KPřed 9 lety
Evo 8 Gates timing belt noise (cold start)
1983 Volkswagen rabbit gti overview
zhlédnutí 16KPřed 11 lety
This car is now for sale on vwvortex.com. It just goes over all of the imperfections on the exterior and shows some other things
83 VW Rabbit GTI
zhlédnutí 267KPřed 11 lety
A little tour of my Mk1 Gti that I just recently picked up. The exhaust has a pretty bad bang when it first starts up. Im trying to get that fixed asap. If you dont like it or you have unconstructive criticism please feel free to shut up haha. Havent started working on her yet so give me any advice or ideas you may have. thanks, Brian
Extremely helpful. I used it for 2018 Tiguan SE. I would like to share a few helpful tips: 1. try VCDS before you actually begin the entire job, this helped me get familiar with the procedure, plus know where the functions were located.. also clear out your codes for your brakes, check codes make sure they are gone and them proceed. 2. Have wheels off, vehicle on stands, parts laid out along with tools. Plus brake reservoir open, put rag over entry so nothing ends up in the reservoir. 3. Use a battery charger for the vehicle. Plus charger for laptop, plugged in for additional piece of mind. 4. VERY IMPORTANT: before you begin, clear out codes, ensure there are no codes and then; Open the calipers on VCDS (follow video), during this step you can close the controller while the brakes are in the open position. 5. Finally, pushing back the piston has very little resistance, if you don't have a caliper tool, and you are using a C clamp; ensure it is at least 6 inches. Press brake pedal gently back in place close the brake reservoir and "close" or end the procedure on VCDS. Thank you for posting this video.
Thanks works for me.
Uno scarico messo a cazzo
And after ending brake lining change function VCDS will perform the Electronic Parking Brake test. Then is should say passed. After that don't forget to clear ABS module DTC's or you might get a DTC saying EPB is in brake change mode.
Just did a set of these really loud when they are cold. After driving no noise though. Did this ever change for you? Thanks!
It has changed a bunch. After some miles and good oil changes it is actually an extremely quite 4g63, I am happy to say. The normal tick when cold and the idle drops, but to me it is much improved
@@Bot944 Thanks for the info! I was worried when I first heard this.
Thanks for the post. You helped me out!
I am glad! my sisters car was metal on metal for the rear brakes, when that other video wasn’t working it was making me nervous. I wanted to make this video to avoid that happening to anyone else
Sounds normal with no tick lifter
The tiguan does not start up?
Beautiful car, they are becoming a very rare vehicle to find these days.
You sold it for an Evo,🤦🏻♂️🤦🏻♂️🤦🏻♂️🙄🙄🙄
Visitando a los amigos, excelente canal y muy util el video, lo vi completito, saludos y ya active la campanita para estar al pendiente cuando subas un nuevo video🤗😉👌🙏🏻💚💓
Used this process on my sister’s 2019 Tiguan SEL 4motion R line. Should be the same for 2018 and 2020. I believe all MQB cars Golf, GTI and Golf R. Possibly some other newer Volkswagen and Audi cars Hook car battery to a trickle charger Hook computer to a charger and plug into car Ignition on Open ross-tech vcds Clear any codes to start Pump brake pedal(idk if this is necessary) -Select -03 ABS Brakes -04 Basic settings -IDE03331 to start the change Go back and do the brakes just as you would -IDE03330 to finish and test the system Refer to the ross-tech video that is out there for more info. Try this at your own risk, I am just trying to be helpful to people that are experiencing what I was
Do you recommend them? Or not because of the noise, performance wise are they good? Idc about the noise ^^ they just need to work great
swissevov they definitely still tick when cold, but after the car gets warm and it seems some oil pressure they seem to quite down. I would recommend them if you are going to be doing cams anyways
@@Bot944 okei thanks😊 my lifters are ticking, so i want to change them, maybe i will doo cams too im not sure we will see, but thanks!
GTI 👍
IS it for SALE?
James Eatmon sold it 8 years ago
Great car! Beautiful wheels!Nice color at interior. More videos! Check my channel to see two vw golf mk1 gti;)
Great car! Check my channel to see two vw golf mk1 under construction ;)
It is not 83, tail lights are from 1979
Michal it was modified, US did not get a rabbit/golf in 79 to my knowledge
friend a question, in which country did that version of the Caribbean come out, I live in Mexico and I have it but it doesn't appear on the internet and I wanted to know in which country it came out
Hey man, this version is called a Rabbit and it came out of the United States. I believe these were actually built in Pennsylvania, USA. Not too sure which versions were out in Mexico, I know these were produced in south America and other countries for a while after this though
Ok thank you friend, I'm lucky to have that version like yours in Mexico, regards.
i used to use those damn gatorback goodyear belts and they whined like i had a bloody supercharger under the hood...normal belts fixed that issue
Volkswagen Kaninchen Große Fahrt Einspritzer 😁
Why are these called "Rabbit" in the US? it's a VW Golf and always will be 😂😂
build in Westmoreland, Pennsylvania, USA. We have a Rabbit Edition Golf Gti for 2019, I believe.
It's a pity that VW America didn't give you the European spec car. They have taken a beautiful car and made it ugly. ..especially with the 1970s style porn set red interior 😢🙈😣
Ben Par come on man the porn set interior is groovy as hell!!
@@heshdeath4707 I agree us spec interior is way cooler
A truly beautiful car that's been ruined by VW America. Why did they put in the 70s porn star interior and the square headlights? 😣
Looks good but sounds like a bag of nuts
83 y calavera corta ??? No es 83 yo tengo una 81 y ya es calavera larga
my evo 4 engine makes the same sound when cold!!!...is it just cuz the timing belt is on too tight?
its idling rough, the engine needs a service, or the ignition is off. otherwise a good looking car, especially for its age. nice car. keep the oldies alive :)
My fir car was 76 rabbit. Bought it for $3500 when it was 7 yrs old. It was in great condition n traded it for new 2012 Camry le
7?
aww man someone took your timing chain cover
Please don't be a fartbox exhaust, Please don't be a fartbox box exhaust, Fuck it's a fart box exhaust.
decent start to a project car, looks like it still needed quite a bit of work on the interior and motor, good start though.
Did you fix this ?? What was it
DIESEL!!
How did you fix it
The gates blue racing timing belts make a whining noise, not sure why but I've talked to them about it before.
Fly GTI
I bought one of these , this same year , for 150 bucks best investment ever regardless of it eating tires right off of it , unbelievably fast car and fun as shit ,, was so funny in the late 90's blowing away brand new v6 mustangs with this thing lol
I'm having that same sound right now, freshly rebuild evo 8 and new belts and I'm pretty sure he put it on to tight. Thanks man this saved me a bit of trouble.
Why is your car over heating?
Lmao
Why do the old ones sound so amazing?
Nice Car bro I hope to see you drive it.
timing sounds a little off. Love these old little wabbits though!
find the problem out ?
Yes, I took it back to the shop shortly after this video was taken. They said it had something to do with the balancer belt being too tight. They loosened it a bit and it has been whine free ever since. Just normal timing belt noise now
thanks allot bro ill get mine looked at tomorrow !
no problem man good luck!
+Yama “2011R1Raven” Rider Hey man, my car definitely has some lifter tick. I believe they are just as noisy now as in this vid, maybe I will make an update video on it. I believe that lifter tick is pretty common in 4g63 engines. But, I would definitely check the tension on the balancer belt of you engine. That is what the shop i went to did and the whine stopped after that. About 7k miles later and I don't hear it at all. I believe if the belts are too tight for too long it could have negative effects on your oil pump which is not a good thing at all. Good luck!!
I have a 2jzge and im hearing a similar noise kind of like a putter or fluttering coming from the belt area/cams hopefully the same fix my mechanic said it was normal new belt sound
Legend car
sounded like it was mis firing but thats nothing a little tune up cant fix and the rear pipe sounds quite nice
Insane how many likes and views this video has! Really regret selling this car in some ways but it allowed me to buy my dream car, which is an Evo 8. I feel like I missed out on the MK1 life so hopefully I can buy one as a project at some point! Thanks for watching guys!
Bot944 I have one for sell
DVRK LO how much? where are you located?
Wrong belt tension
Yepp, got it re tensioned last week and now she sounds much better
Bot944 why it is happened? and how you do the re tensioned? mine having the same problem
Mohamad Fitri basically the timing belt on my evo was too tight. I took it back to the shop where I had the belt done and they took off the accessory belt. It still made the noise. They ended up saying it was the smaller balancer belt that was too tight. I am not 100% sure how they loosened the slack on it, because I have honestly never touched any of this type of stuff before. All I can say is now the noise has greatly greatly reduced. A belt system is always going to be a tad bit noisy and the stiff kevlar belt just makes it a bit worse, but no evo should sound like this. Definitely take a close look(or have the shop take a close look) at that small balancer belt. Good luck and I hope you get her sorted out!
Beautiful just beautiful! Love that red interior too! But it sounds rough dude! It's crying for an all out overhaul!! And a full crome exhaust upgrade! My heart bled when he started it!!
I lost my virginity in one of those. Ohhh mr Murdock such strong hands