- 6
- 843 317
Masterworks Jewellery By Jonathan Corey
Registrace 30. 09. 2013
Masterworks Jewellery -Homeschooling Masterworks Jewellery Style
Our children are at home and unable to attend school due to the COVID-19 pandemic. Here is our daughter getting to work in the studio. Enjoy and stay healthy! www.masterworksjewellery.com
zhlédnutí: 1 406
Video
Masterworks Jewellery - Trailer for Trigold Mokume Gane Ring with Sterling Silver Liner
zhlédnutí 6KPřed 7 lety
This short trailer takes by Jonathan Corey gives you a glimpse of his process for creating Mokume Gane Rings. To view the full video go to czcams.com/video/yA3j_WgTjV8/video.html
Masterworks Jewellery - Going to the Show Part 2: Setting up the booth
zhlédnutí 2,1KPřed 9 lety
A short time-lapse video of our 10X10 hard walled booth being set up. Most people do not believe that this whole booth fits in our van, have a look at Part One to see just how we do it, czcams.com/video/Px8kqIwm8_w/video.html. Thanks for watching! Don't forget to like and subscribe, enjoy! www.masterworksjewellery.com
Masterworks Jewellery - Going to the show Part 1: Van Load
zhlédnutí 1,1KPřed 9 lety
Most people don't believe us when they visit our trade show booth and we tell them that the whole thing fits in our van. We have put together a little video of our 10 X 10 hard walled booth being loaded into our van in prepartion for a show. Carpet, lights and all. To view part two go to czcams.com/video/kk0HPs8en1s/video.html. Please visit our website at www.masterworksjewellery.com
Masterworks Jewellery - Trigold Mokume Gane Ring with Sterling Silver Liner
zhlédnutí 829KPřed 9 lety
Jonathan Corey of Masterworks Jewellery will take you though the steps of creating his 18kt Mokume Gane Ring with a sterling silver liner. Don't forget to give us a thumbs up if you like the video, share and subscribe! To see more, please visit our website at www.masterworksjewellery.com, enjoy! Masterworks Jewellery By Jonathan Corey Designed and Created by Hand in New Brunswick, Canada. www.m...
Masterworks Jewellery - Hugs and Kisses Earrings
zhlédnutí 3,5KPřed 10 lety
Jonathan Corey of Masterworks Jewellery will take you through the steps of creating his Hugs and Kisses earrings from his most popular jewellery line. Don't forget to give us a thumbs up if you like the video, share and subscribe! To see more, please visit our website at www.masterworksjewellery.com, enjoy! Masterworks Jewellery By Jonathan Corey Designed and Created by Hand in New Brunswick, C...
Absolutely beautiful.
Что сказать, красавчик! при наличии растяжки для колец - выбивал киянкой, полировального станка - шлифовал руками. Не удивлюсь если у него есть насадка алмазный диск на бор-машинку или фреза или гильотина, но он распилил лобзиком. Заметил что потери металла он не собирает, наверное из дешевых металлов, кустарь.
dlaczego robisz trojkont zecz ,a pozniej robisz to na okraglo??
🙌
Super ❤
Bravo, bravo, abs. precise craftsman as well as great video, full respect from me and old BG.
Amazing work. But without captions or commentary I don't always know what you are doing and why.
Is the outer band copper/nickel/brass or white yellow and rose gold? Beautiful job either way, thanks for sharing your work
what use is the foam in the rollers for ?
Why he doesn’t explain how to weld the gold layers?
Amazing!!!
That just makes that ring pop.
nice awesome art work.
Como permiten un vídeo con tanta velocidad .
The most important step to weld the different kinds of gold is missing..
Amazing work 👍🏼👍🏼👍🏼👍🏼
Gorgeous design on your ring!
I don't understand why so many modern jewelers use the mini torch when the Hoke is so much better.
Im not sure how its better but I can tell you that my hoke torch was leakey and so were the ones at a place I used to work at. I switched over to the mini torch and have no regrets. Thanks for your interest.
@@masterworksjewellerybyjona3255 The Hoke is far more versatile. It accepts a wide variety of tips from large to small. It can melt a much larger quantity of metal, solder a heavy shank or do the finest chain repair. You can use it one handed and easily adjust the flame with your thumb. The mini torch is too wimpy. I routinely size gold rings while holding them in my fingers. Get in, get it hot, make the solder flow and quench it before the stone gets hot. No messing around pulling and resetting stones, no wet tissue paper or wet sand. That's how you size a ring fast. The mini torch could never do that. I worked in a wholesale trade shop, we had a 24 hr. turnaround time for sizings. No one used the mini torch.
@@desmondmurphy449 Awesome, sounds like it the perfect product for you to continue to use. It was not for me so I tried something different. I really enjoy hearing about and sharing about different experiences. appreciated Jonathan
I haven't seen twisted wire flatten out like this, it is stunning !
how to i get this ring? Location plz?
You can order it through the website www.masterworksjewellery.com I am in Canada
Such a stunning wedding band. I love the tri colour.
Thank you for your wonderful video! I would love to see more mokume gane-how you make the billet and create the patterning. Which metals did you use in this ring? When making gold mokume gane have you found some combinations that work really well and others that should be avoided?
sooper
Worth watching
Absolutely amazing
Из готовоой заготовки?
Sooo much skill and effort put into one ring. Wow...
hi Jonathan! Great video, thank you so much for sharing your process. I'm curious, how did you calculate the gauge needed in wire form to mill flat and to the width you want? Looked like around 2mm round after you planished, then filed a flat to help start the milling process?Thanks for your help!
I always roll out the width of the ring first and then roll it to the proper length. I also know the thickness I want to achieve. The first few rings I made I had to estimate the length of the planished mokume rod needed to cover the liner ring. I was able to narrow it down and create a system based on percentages. If I know that a 72mm length would cover the liner ring I multiply it by a certain percentage for the wide bands and another percentage for the narrow rings. I have to keep in mind that I need to have sets of diagonals at both ends of the rolled out piece so I can create the hidden seam in the diagonal lines of the pattern. This system also allows me to figure out billet lengths for rings wider or narrower than I normally make.
Aint no body watch this!
Trendsmax Men's Cuban Link Chain Necklace Gold Filled Chain Necklace Gift. www.ebay.com/itm/184483447140
Almost like a very heavy gold electroplated silver ring
Making fool in front of camera
Extraordinario trabajo!
No fire scale?
The fire scale has been completely removed in the sanding and polishing process
👍
Absolutely beautiful, I really enjoyed watching this.
Piston
Can we order ?
Yes you can order through the website www.masterworksjewellery.com
Amazing work i like
💗💗
Не слабо. 658$ или 46500 RUR
What is mixer of metal...?
The combination of metals are 18kt yellow, 18kt palladium white, 18kt rose gold with a sterling silver liner ring.
Te saludo desde Colombia. S.A
I'm Robin Kumar Singh in lndina
God Ganpati Bappa Bless You and your family Members
Parabéns pelo vídeo, deixa um contato pra poder comprar seus produtos.
price please??
For current pricing on this ring and others like it you can go to www.masterworksjewellery.com
Чудесно
i love to have this type of ring in hand of my wife.
how to make mokume gold,this is just a ring like any other,its not from scratch ,show us the rest of it ,how to make the gold