Video

Thank you for the video, especially to be so honest to report failures as well to let everyone learn something. Really appreciate your review

I just spend 12 hours under my van becouse of one very jammed upper bolt😂 At first it seemed an easy job but was something else than easy. My god how numb i was after that. 12 hours fight but manage to win that battle.

Those little sensor bits you took off the pads were nothing to do with the ABS. They're pad wear sensors.

We went down Trollstigen in a coach bus on an excursion trip. Very grateful for the bus driver’s skills navigating those hairpin turns!

Thanks. Very helpful. Is there anywhere (eg Europe) where it's necessary for the access to the gas locker to be from the outside?

Ours when we poured the water in the big white thing was leaking in the middle of the van close to the driver side so guess that's it

Thank you for your video we were leaking not the water pump but I watched your video and I'm pretty sure it's the housing my husband's taking it apart but he can't get the last bolts I think not that your hard middle one just some missing one.

Brilliant job mate appreciate you taking time to make it. Very helpful 👌

Had these on my last car and will put them on again soon on an EV. I was blown away with their performance in winter, took them out to test on compacted road and fresh snow they are a game-changer. Being able to safely bring the car to a stop without any surprises or get up a hill where others are getting stuck. Alright they are not the best summers and you may not get a crazy severe winter but better to have these than find yourself in a ditch.

This is the sort of real life experience I find helpfull.

Could you do a video or tell me a bit more about the suspension lift as I’ve been looking at lifting my one and there are bit expensive, please

Really enjoyed viewing this! I have the same car..! If there’s any option I can ask some sizes of that wood staff under the bed? Really inspired to do the same

It's better to name the sizes of each nut or bolt you remove

Awesome build, saved!

This video was the most helpful one I have watched! Thanks so much!, especially the turn off when not needed hatch

Great video! Those drone shots towards the end of the vid were spectacular, particularly the ones at 6:13 and 6:28

Is there a metal alternative or aluminum??

I love how shes so small she makes a small guy look tall , hes sbout 5 ft 8 max , but next to her she looks like shes 5 ft 5 and hes 6 ft 3 lol but nah shes 5.0 ft and hes 5 ft 6/ 7 max

Really good to see a U.K. shogun CZcams video, please do carry on! I absolutely love mine, some custom under body protection would be useful I know the tanks are very susceptible to being punctured or crushed when you belly out

Rock sliders! I smashed mine to bits off roading, and now looking into making some custom ones along with a rear bumper as it’s like a diggers scoop!

Do you use gas ptfe on the olives or jointing compound?

Plant looks like cannabis. Greetings from Cadiz, Spain.

Love the water idea, batteries, couch. Loved the dance video

Great Video, regarding the pain in the butt bolt I used 1/4 drive with extensions with a universal 5mm multi spline socket (which fits the torque bolt) with insulation tape wrapped around the joint of the swivel joint just once to take the floppiness out of it and it just seemed to find it's own way onto the bolt, it may of been luck but it may not of!!

You didn't show the faulty part. Saying there was a leak? And not saying what the leak was? Then Just somehow fixed by removing and reinstalling. Everyone makes mistakes. But a good video. Thanks

I have a Lithuanian wife. 🥰

Do you have to reset/clear the brake pad warning light after a brake job?

Price?

Good video man. Plenty of experience working on other makes but not the mercs, so this was helpful setting me up to do this on my glk. Cheers brother.

This is by far the best video on tapping into a sprinter van diesel tank on CZcams. An excellent method for removing the sender unit, using the correct pipework and jubilee clips. Plus an overall neat and tidy installation. I'd love you to do mine haha.

Very interesting. I'm toying with the idea of outing my old Boxer Autosleeper for a Shogun and pull a small caravan! But when I'm not pulling the van I want the Shogun to be a Day Van with the odd solo,off grid camping trips. Ideally I would just need to come up with a micro kitchen and a porta potty. (I'm at that age now)! Will be interested to see what you come up with for the conversion. Just subbed. 😊

Why do people need to mention every single item in these videos 🤷‍♀️ “here I have a bungie strap” 1:38 😳😳

What size gas tank do you use? And how long does it last?

Thanks for the video bud. However, I would not recommend the new pad bracket bolts which come with the pads unless you have new ones from a mercedes dealer. I made the same mistake and damn think broke later on. So they are not good quality. They must be heat treated and durable. Cheers mate.

Great video - thank you! Did you do anything about steel filings falling into the body space? Or is it ok to leave all that?

😍 'Promosm'

😍😍😍

Straight pipe it! Let that baby roar! Oh and obviously a winch and light bar!

What else do you guys want to see us upgrade on the shogun? We're loving 4x4 life!

Did the gas installer have any problem with your choice of hobs? The pot support and burners are not fixed and could take flight while you travel. The reason I'm asking is that I bought the same hob for my van and cut the hole in the worktop before I realised that the burners and pot stand should be fixed. I'm thinking of making a hinged cover and putting a tea towel in to stop rattles.

Should’ve got a land cruiser

😍😍😍

What a lovely video and you’re such a lovely couple! I’m about to buy a Sprinter too! Following you for sure! Safe travels X

Glad you’ve gone jap! Haha see you soon for an adventure! Subbed

What Adhesive did you use?

Are you going to be doing Sprinter Van conversions to order? I watched you doing the previous ones and you are clearly very good at it.

Looking forward to seeing what your plans are for this!! Personally, I would go back to stock sound and get the screen working again.

Many thanks for the tips and Help. Thanks to you I got the tricky job done. I liked the tissue paper reminder. When working on the car I seem to spend longer looking for dropped bolts. Regarding getting the middle bolt out of the EGR cooler.. I used a 10inch extension which comes out beyond the end of cooler then added the 6 inch and rachet making it perfect length. This was the easiest part of the procedure. Extensions used were amtech 3pc 3/8Inch Drive Extension Bar Set Sizes: 6", 10" and 18". from Euro Car Parts

Great video, thanks

I always ask….is it a “fall off” or a “roll down”? There’s a difference! :-)