Video

Did you ever figure out the problem?I’ve changed to a 2 piece and had the trans rebuilt and still shakes

How many acres is your property?

I have a 17 sierra that had same problem, bilstein 5100 shocks in the rear made a huge difference, still has a very faint vibration but much better than it was

Im having trouble sliding the rear shaft like i have a solid 2 inches that can the spines are still xposed any tips?

Suppose to fill it from the bottom only until it comes out of the middle,then put middle screw in n fill the rest from the top.run engine n put in gear forward n reverse the recheck the dip stick top screw.those oil pumps work well . I have one.

Great video! Approximately how many minutes boat ride from Grider’s to 76 falls?

Since this was made, NEF was absorbed into Remington, and this line of guns have been discontinued. Savage Stevens and Henry are still manufacturing break-open, single-shot shotguns. But NOT at $99.00.

hey do you monitor your comments??? if so i have a OMC cobra 2 with a 5.7. the 5.7 will only rev to 4200 and it only will go 45mph. it gets to 45mph really fast but dead stops at 4200rpm. Any idea?

Excellent rifle!

Hey, nice boat. So saw one online for sale so was just lookin them up. I've only had a basic John Boat. But thinking about buying one. Trying to learn all I can first about repair and all. What do you do if your motor goes out on the water?

Did you have the Drive Shaft Balanced?

A 25-06 with a 22 inch barrel is the stupidest idea that any gunmaker ever did. I will highly recommend a minimum barrel length of 24, and 26 is ideal 👌

Does this fit a 4wd ??

👍

The 25-06 is at its finest with the heaviest bullets; 117 or 120gr.

Low Pressure 50 Caliber Smokeless Loads in a 209 Factory Muzzleloader, 2 DVD set | eBay These 2 DVDs contain a demonstration of using Low Pressure Smokeless Loads in a 50 caliber factory muzzleloader.

Painting your yoke is not a good idea.

Got me a savage axis in .223 love it. If you want to smooth out that bolt and put a smoother trigger pull. A guy makes a bolt lift kit that literally should be on every one of these out the box. 20 bucks and easy to install. Also another company makes a 20 dollar trigger kit. The 40 dollars makes it feel like a 1000 dollar rifle. Its insane that the rifle doesn't come like it already. But a great rifle with or without the upgrades. Its night and day though for 40 bucks and easy to install. Check it out if you like tinkering with your toys def worth it. Btw I love that wood stock. Great video.

Ouch these tracks are way to tight. Nice machine. I have a 450g and a 650g. The G series is the last of the great machines, mechanical transmission and no computers running the engine or the transmission.

How much it cost to buy a similar machine?

25-06 is cool...i get tiny groups with my savage. I found out years ago whatever ammo you use...its all dead on at 100 yards....no need for adjustments. THEN, after a few years I saw an article that said just that. It drops deer like a lightning bolt i have found out. I think an all copper 100gr bullet is better/faster kill than the 115gr nosler partition. Both bullets work great.😊

Awesome

Same. My poor rifle got the brunt but no reward last season

Mine only vibrates between 63-68 mph. I just cant figure it out.

So i wonder if ri rifling the sabot itself like a shotgun sabot will help or a material change like carbon fiber...or lubricant of bullets

I’ve had a 25-06 since I was 12 years old and bought my first rifle. Had one every since. 22 inch barrel is to short when your talking a magnum cartridge basically.

Quarter bore works great 👍

Dude. I literally have that exact same gun and scope. I also have the same POS silverado with the shakes. And... I too ride a big quad in the appalachians lmao.

I really want to get into reloading. But it just seems like a lot. And at least here in California, it seems like reloading costs as much as just buying.

Jeez, so these thing did come with 16t front sprockets stock!! No wonder I read the 2000/2001 DS650 had a higher top speed than the previous years.

could you recommend a site on where to buy the parts to rebuild the motor on one of these? did you stick to stock bore/stroke and crank?

What year are this machine?

You cannot determine accuracy without shooting from a bench. Having your gun supported on a rest, eliminates your movements, thereby checking the accuracy of the bullet and the gun. Also, in a short barrel revolver, a faster, burning powder will work better. Why is that well the ideal situation is to have all of the powder burned before the bullet leaves the barrel. A slower burning powder will not do that but a faster burning power will burn most of its powder before the ball leaves the barrel on a snubi. Thereby providing more consistency and more velocity and power. Hope you got that her yet.

Get rid of the led sled, better groups without it. No need to clean bore after 3 shots, good way to get lousy groups.

I just bought a Polaris xpedition that i intend on getting licensed. (Met you in Marlinton at the tavern) having a lot of work done on the Polaris… so it isn’t ready for Pocahontas county. But you’ll have to let me know where this road is!

Beautiful rifle. I have a CZ527, but would like to have a model 70, pre-64.

My 25-06 has never let me down through the many years. It is certainly under rated.

It looks like Your tracks are too tight,this increases wear by a lot.

Love our family 12 g 3 inch shells 1940s my grand pappy had it new his Red Letter Winchester with 32 inch Barrel great bird gun single long Barrel gets you out far with Nice pattern put duck geese Turkey lots of deer in its life time. My pop uncles will keep passing it down in our family. Great 👍 gun you Designed it better I do love the Adapters shoot any kind ammo 22 Lr 410 to 45 also I would get 223 357 and have it shoot 38s great 👍 product the adapters learned that thanks for your content makes great food on table and have the Ability to have different also a 2 barrel side byaside could be fun too With those tube Adapters . Great 👍 job

It has been fairly easy to find 117 or 120 grain based upon my experience. Not so much for other weights, but online usually solves that issue. Heard Ron Spomer note this could really be the next best thing with fast twist rates.

Would've been a little better and quitter had we been inside I think.😢😢😢

All nice but you need a dillon 550 or something. Accurate and a whole lot faster. Nice video though.

Where did you get the heat shield with the sights to fit a brake action shotgun

can you pull the .308 bullet from a store bought factory round and seat a .224 bullet in the sabot (keeping the factory powder charge intact) ?

I like 25-06, I own a few. The thing I don’t like about it is it’s so close to the performance of what you can get out of a short action and shorter barrel. The thing I do like about it is the nostalgia, almost ubiquity with westerns plains game/ mule deer.

The Rona blaster...

I have 2010gmc sierra 5.3 my truck started at 45 thousand miles.Still can't figure it out.I think I've spent about as much as the truck already. If you or anyone out there figures it out please let us know.

Close the powder box before you shoot. It could ignite the whole thing.

Any luck?

DUDE, REALLY COOL !!!