Video

빡빡이형 기억하고 있었다고!!!

I'm pissed at your company Q&A Dept. I sent a question about which pass thru I would need for my trainer, and in a week no one bothers to answer to help. What's the sense in having a contact us link if nobody answers customers?

Do you ever have to top up the oil. When I spin I hear a gurgling sound that sounds like water.

Is thus compatible with zwift

On my T-6400, the power readings are too high (compared to readings from my Assioma Duo power meter pedals) by about 20'ish Watts at low power (50'ish W on Assioma compared to 70'ish W on T-6400) and from there it gets progressively worse (170'ish W on Assioma compared to 300'ish W on T-6400). Essentially useless. Plus, as of Feb. 2024, Kinetic customer service is non-existent. I've contacted Kinetic about the problems with power accuracy three times in the past 2 months and have not heard back from them. STAY AWAY FROM THIS TRAINER AND THIS COMPANY.

Hello, I have had a problem with the 9mm adapters, I have lost the one on the cassette part, and I was to see if you could send me the measurements, so I can make an identical one. Thank you so much!!

Hello, I have had a problem with the 9mm adapters, I have lost the one on the cassette part, and I was to see if you could send me the measurements, so I can make an identical one. Thank you so much!!

Hola, he tenido un problema con los adaptadores de 9mm, he perdido el de la parte del cassette, y era para ver si podría mandarme las medidas, para poder fabricar uno idéntico. Muchas gracias!!!

I own two fluids, not that loud at all.

The most important part is missing: the software calibration process. Kurt Kinetic utterly failed here. The whole purpose of a power meter is measurement. For that, you need software to calibrate the signal coming from the machine, as every time you tighten the knobs (which have been attached with a terrible variable screw-mechanism), the watts shown will be different, even when tire pressure is a constant. A Garmin does not hold the proper calibration software standard to do this, so an app is required, Kurt Kinetic has the Inride App for this purpose. The sensor cannot be calibrated properly, their software on Android crashes constantly, the measurement stops during a ride, etc. It's a mess. And it's a known problem. In this field, the Kurt Kinetic not only failed utterly, but their customer service is deflecting, while they do keep advertising on Strava even with a shill marketing effort. Avoiding the Android issue alltogether and advising to buy an iPhone (costing twice the amount of a decent powermeter that would render this hometrainer's powermeter selling point obsolete), all the tricks in the book but to avoid having to put together a properly functioning app. Their recommendation (and no surprise, TrainerRoad CEO Nate is from Kurt Kinetic) is to calibrate with a third party application, such as TrainerRoad or Zwift. Which is fine, if you are willing to pay a monthly 20 USD fee just to have a constant calibration. We can all do the math, within a year or two you could buy a properly functioning power meter on your bike from that amount, which you will be able to use outdoors as well. Interestingly, the calibration process in the TrainerRoad app has no issues whatsoever.. So somehow, what Kurt Kinetic was not able to do while Nate was still there, Nate is able to do while Nate he is the CEO of TrainerRoad. What a coincidental difference in expertise! When asked, Kurt Kinetic is ignoring its customer base. It is not even made clear that the initial sensor these Roadmachines came with did not work upfront. So it was recommended to upgrade to a newer sensor (at cost), which does not do the job either, since the software is faulty. They were selling a product of which they knew that a significant part of their customer base will not be able to use its prime feature, unless spending a lot more on affiliated subscriptions. To top it off, interesting collaboration between Garmin and TrainerRoad as well: the workouts that you upload to your Garmin from TrainerRoad can no longer be accessed under the Workout plans in your Garmin, after you pause your subscription to TrainerRoad. Seems these providers are one happy gang, abusing their software control. My recommendation is to avoid these manufacturers. Save yourself some money from tempting "cheap" workarounds to measure power, get yourself a decent power meter on your bike and use an offline independent software like Golden Cheetah, so not even Garmin can mess with your data through the server-based location of all your data. Which they can limit access to at any time and are probably selling to a third party anyway.

I believe the company has now been sold to someone else. I did not get any response from my inquiry about the road machine failing. The cadence is way low and the wattage is 10 to 20 W low now.

I’m having trouble getting the qr adapter out of the trainer, any advice?

Where is the android app version ?

Question? Why can't we use the bike's own skewer?

You didn't show removing the rear wheel, attaching the cassette, and fixing any chain or derailleur issues.

I have the green version of bluetooth it seems dead it wont connect to any device not even kinetic app itself do i have to buy that same exact one in video plus the magnet and sensor again or is that not removable once installed on the machine?

I tried your way but i have lockable with key skewer and the rods to have skewers hooked on they were extremely loose wouldn't tie them i guess use the skewer given with machine. Also my cable for Derailleur somehow keeps interfering with skewer head so not sure how ur putting machine in it

How can i find the sensors in the kinetic trainner? My garmin cant find.

Hi I had purchased a Kurt Kinetic bike trainer through happy earth in 2018. The power socket has loosened/ become wobbly and off late it's become really cumbersome to get the workouts due to repeated disconnection of power supply. Kindly suggest what could be done to rectify the problem. Thanks and regards.

I strongly recommend you don't make the mistake I did an buy a Kinetic trainer. The trainer itself can be functional, but 1) They have no app for android any more. A year ago they promised they were updating it and a year later still no app. 2) Calibration is hit and miss with iOS. Often I end up with very little resistance. I'd like to think I could go that fast, but I can't. 3) Functionally there is no customer service. On their website if you hit contact it goes to an error page. When I called a customer service number I found via a third party website, I got a message to go to e-mail them. 4) If you use the iOS app, well it is awful as well. They have plenty of competitors - pick a different trainer.

I strongly recommend you don't make the mistake I did an buy a Kinetic trainer. The trainer itself can be functional, but 1) They have no app for android any more. A year ago they promised they were updating it and a year later still no app. 2) Calibration is hit and miss with iOS. Often I end up with very little resistance. I'd like to think I could go that fast, but I can't. 3) Functionally there is no customer service. On their website if you hit contact it goes to an error page. When I called a customer service number I found via a third party website, I got a message to go to e-mail them. 4) If you use the iOS app, well it is awful as well. They have plenty of competitors - pick a different trainer.

I strongly recommend you don't make the mistake I did an buy a Kinetic trainer. The trainer itself can be functional, but 1) They have no app for android any more. A year ago they promised they were updating it and a year later still no app. 2) Calibration is hit and miss with iOS. Often I end up with very little resistance. I'd like to think I could go that fast, but I can't. 3) Functionally there is no customer service. On their website if you hit contact it goes to an error page. When I called a customer service number I found via a third party website, I got a message to go to e-mail them. 4) If you use the iOS app, well it is awful as well. They have plenty of competitors - pick a different trainer.

I have a BIG problem I don’t know what to do. When I was installing I accidentally pressed too hard and now my magnet went too deep in the hole and I can’t retrieve it. Any ideas?

What is the USB cord for? I plugged it into the unit and to my laptop. I can not see it doing anything.

double sided velcro would be better for the device and also mine did not come with the grommet annoyingly

Where i buy that bike Trainer?

video is trash...my android screen is completely different BUT it nevr allows REGISTRATION so I cannot access he device at all...HELP!!!

I have a kenetic watch and cannot figure out how to set the time. please help.

Just wondering what holds the front tire in place or am i missing something obvious here

what's the color of the dog

This can be use for Rouvy? Thanking you in advance.

I just got my trainer and watched this video that was very helpful but what it did not tell you is how tight to tighten the bolts. Mine is sitting up really high and the ride is very awkward. I'm going to try some different arrangements

Which way does the battery go in? How do I open and close the battery door?

That's why I have one! It's the best fluid resistance unit made.

안드로이드 앱을 찾을수가옶습니다

안드로이드 앱처음사용자입니다. 새로운 계정생성이 안되는데 왜? 그런건가요?

Why not just mount the bike as is on the stand. Why is the skewer necessary? Thank you

PЯӨMӨƧM

where can I buy this? its sold out everywhere!

Curious on how it stacks up vs. the R1

Respectfully disagree with the noise as portrayed within this video of the road machine. i had one and it wasn’t nearly as noisy as in this video. it sounds like the persons bike chain is rubbing.

What is the silicone oil viscosity in your product?

The app is not in the google play Error message"We're sorry, the requested URL was not found on this server."

I enjoyed watching your adventure, including your thoughts on the Greenland paddle. thanks for sharing!

I have a 16 in brompton folding bike

How do you get videos loaded in the app?

How wide a bike can be fitted? 29er with boost thru axle?

Bike trainer with Giant three speed?

Easy simple explanation that was easy to follow thanks!

I purchased this and found the Inride pod had to be moved closer to the magnet in order to be detected. Not a big deal (just needed some double-sided tape), but it was a bit disconcerting that the unit was shipped with the sensor attached in the wrong place. Also, don't assume the battery it ships with is "fresh". If the sensor doesn't seem to work, try another battery first. I did this and found the sensor responded to me waggling a magnet past it, but didn't respond to the roller. When I moved the sensor closer to the magnet, it worked.