Video

Just a fabulous vid. Bought a Danby 70 pint three days ago and was struggling just a tad with all the control buttons on top. Have a Danby 40 pint in my basement cave and has given me 10 years of great service so far. Danby makes great products. QUICK QUESTION: I am installing my new 70 pint model in the storage section of my car/motorcycle building behind my house. Building is about 3000 sq. ft and area for the dehumidifier about 2000 sq ft. Does it have to be set on the floor or can I install it on a large shelf about 5 feet off the ground? Thanks very much.

Wht change a perfectly good screw on filter Mine broke Plastic garbage That's pretty bad quality considering its on a Toyota

Great video. My 2019 Sienna calls for 5.7qts

65k miles and both of my front calipers seized up. Getting ready to install some Powerstop replacements with a fresh set of Z36 pads and their rotors. I’m bummed I only got 14k miles of the front set before the OEM calipers seized.

So helpful!! Thank you so much!

Be careful with compressed air. If it IS clogged, you could rip the tubing.

Does anyone know where it's located on a 3rd gen tacoma 3.5 liter?

There is absolutely nothing wrong with the plastic housing as long as you treat it properly and do not abuse it. That means getting the proper cup-style filter wrench that fits over all of the flats on the housing. Remove the round metal bottom plate from the plastic housing first, before draining the oil. No oil will come out. Insert the plastic drain tool that comes with the filter with a short piece of fuel hose to route the oil into the drain pan. This is the way cartidge filters are designed to work, and they are fine. Now unscrew the plastic filter housing using the PROPER filter wrench. Change the paper element, lubricate both O rings with NEW oil. Put the housing back on the engine, then put the bottom cap into the housing. NOW drain the oil using the drain plug. The crush washer will stick to the oil pan every time, and it's not easy to remove. I use a clean razor blade, being EXTREMELY careful not to scratch the metal surface. Been doing this on my FJ Cruiser with the exact same 1GR-FE engine and filter housing and skid plate for 13 years and have not had one single problem. Don't follow this video. Do it as I described and you will be just fine. Yes, it is a pain to remove the skid plate, but it's only 4 bolts and it's not difficult. It has two hooks in the front to support it so remove those bolts first and let it hang on those two hooks while you remove the rear two bolts and lower it down. To whoever complained about the paper element, you will find that 99% of all filters are paper. Some are synthetic fiber but it is not needed in this case. Use the genuine Toyota filter element from a Toyota dealer (not an online fake) for about $6 every 4k-5k miles and you will find that your engine will last hundreds of thousands of miles. If you live in the south, switch to 5W-20.

👍🏽👍🏼 Thank you!

Video ok....BUT, you are talking so fast..it is difficult to understand everything you are saying.

Video ok...BUT, you are talking so fast... it is difficult to understand what you are saying.

Thank you

You are a blessing! This also works in the 2022 4runner. Thank you!

How do I find rear drain holes?

Thank you. I broke my handle on my toilet and my handle is on the right side. I bought a different handle which didn't work. This does work and it's thanks to your video.

question, I also changed out my brake pads with this same "extreme" set and put the squealer pin on the bottom of each brake pad since the box gave me 4 of them. Is that acceptable? I'm seeing differing opinions online with putting one on each brake pad vs just one each set of pads...

The automatic shut off is not working water is coming out help?

2:55 i can't resist stopping work and going out to identify the plane flying over...i often use flightradar24 app on my phone.. now what were you showing us ?

thans,,could not release the tabs yesterday

Thank you for this information. Unfortunately my touch screen is unresponsive. Any way to get around this?

My dishwasher is just like yours and it won’t turn and come out

Thank you

The timer is constantly beeping and blinking 0.5. Does any body have a clue on how to shut the timer off for good. The manual directions do not make any sense to my dyslexic brain.

My honda brush cutter cutter, when i put choke down , the engine stop. So ki ndly help me

How much is a oil change for this 4runner that's how badly I'm upset with the process 😤 i completed the oil change but what made me so angry is putting the plate back on i gave up and just tossed the plate into the garage the bolts kept falling out

Love Toyota but maybe just me this is the first filter change i have done where i hated it and it actually made me really angry and lash out like a little boy

Using a blower or air hose on the mower after cutting helps a lot.

i cant connoct to wifi help

So you don’t need to get one of those air sealant funnels to make sure no air gets in?

It does not work. I purchased my 2019 4Runner a few months ago. I followed your instruction, but the maintenance message is still there. I went to the dealer. They will charge me $65 to reset it. Please advise.

Wow, just did mine in 25 minutes using this vid. Fairly straight forward. I used a long nose pliers to take out the plugs and stick the new one in. Easy peasy. Many thanks. Car purred after.

If it rains, will it mess up the unit from the outside

Thank you for showing explaining this in excellent detail 👍🏽

this machine is dry or wet clutch?

How about a bracket?

Hey, I appreciate you giving personal account of a product. Buying a partially CCP owned product is something I worry about, but if it's gonna function properly, I don't really care. To be fair, Canada has sold out to the CCP long ago so I guess that adds to my lack of concern for buying one single product from them.

the thiefs at the workshop want to charge me thousands for this

How often do you change the oil? Thanks

where did you get the springs for the brakes? I only see springs that come with the bottom portion but the second spring wont fit on the top.

Thanks!

The whole reason I looked this up is because I don’t have the original keys. Any options there?

We have one like that have it set on 63 and will only go to 68 at night is this normal? It's in a bedroom use only at night

Replacing filter just to be on the safe side. @126000 miles, the filter was in very good shape. Thanks for the video.

How can I run a self-wash cycle in my washing machine if there's no hot water? Does it damage the washing machine to run the cycle with cold water?

Thank you

Im having a very similar issue on a 2013 rav4 but the AC direction is also stuck on the feet. Would this also correct that issue?

Do you know how to fix it for a 2013 Venza?

Thank you so much for sharing your experience with us.

This video is the truth🫡💯, Thank you sir 🫡💯

Is this ac noisy while running.