Video

So easy!

Clear silicone may dry as it is underwater but don't expect it to adhere or waterproof edges or joints. It has to cure and not touch water for at least 24 hrs

Thanks Blake. Had a feeling that it was possible.

Silicone may have cured but did not appear to adhere to the brick surface.

Thank you for the great instructions but the calculator is not available ☹

How long did it take to apply this start to finish?

You can adjust the range of the dimmer with that blue dial under the switch cover. No need to cut power, since you will stay outside of where the wires are.

What screws would you recommend to build the same but attach to a cinder block wall?

I like that video ❤

Don't take my word for it. After you have used the toilette on a few trips, swab the surfaces of everything in your camper and send them to be examined. Every swab will have been found to have fecal matter. There's a reason why they never put toilets in these campers and those that are bigger and do have one, it's in a separate room, not in front of your sink and stove

I just did my first upholstery job on a similar piece of foam last week. I researched nothing and did it my way which turned out great to me. I used spray adhesive and super glue for a cat bed. Video comes out Saturday. Nice job with the camper.

You’re the best

Thank you friend!

What’s the big black line on the left?

Love this!

Thank you! I was very confused on how to make the cut out for the outlet

How has this held up over the years? Did it stay stuck for a long time or is it starting to peel

Camper!!!

I have two black wires, a red and the copper. Following your video for single pole and connecting the two black wires, what do I do with the red wire?

Thank you!

Finish that cool camper

I would say the camper. I'm excited to see the end result.

The camper seems cool and then you talked about making your own jackery. The power box is my first pick but either one is great.

I think the camper first as that is most important.

Definitely want to see the camper and I’m pretty excited to see the new go cart build!!

Do the camper!!! Love to see the way that can change and show us this summer using it!

I'm also open to other ideas if you have them! I have a lot to learn with this kind of stuff, but maybe we can learn together!

My dude! Happy to see that you’re keeping this going. Can’t wait to see the future content.

Dang ima miss this

He lives!!!! You have to find topics that make this a sustainable effort. So think you are on the right track and will find success. Looking forward to seeing your progress and future videos! Welcome back 👍

We support you! ❤

The non silicone products did not have a chance. They are acrylic latex. Latex is another word for water based. They actually cure by losing water. Hard to do when submerged The difference between the 2 silicones is one is acetoxy cure the other one is neutral cure. You can tell the difference by smelling them. Acetoxy loses acetic acid as it cures and will smell much more like vinegar, right out of the cartridge . I believe the clear is acetoxy. But I could have them reversed.

Where’d you go?

Thank you Blake! Too anyone QUESTION??? My putty knife scraper is metal does that matter? I’ve never hung wall paper before✌🏼

Those drywall plugs are self drilling 🤦

Interesting... I was going to buy Advanced Silicone but looks like I should settle for the regular. Thanks for posting this video.

Thank you.

European here. I needed 10 minutes to figure out what was the stud finder and why I’ve never seen one here it Italy. At first I thought it was a way to find cables underneath and avoid them, but it couldn’t be so because you were actually looking for that spot. At the end I remembered that the structure of American houses is… how can I say it without being offensive… let’s say very “light”, so you need to find the “not empty” part of the wall before nailing, while in our houses in order to hang something you need to drill in the concrete/bricks wall, put a dowel and then a screw 😅

is there more chance the wallpaper can damage your walls the longer it's on for?

Wow! Great video. Thank you.

Do you clean your wall first?

Thanks for the demo, I’m afraid it’s something I’ll just have to dive in and give it a try 😊

First, always measure the width of paper and use a level and pencil to make a vertical line down the wall to match the edge of your first piece…walls are rarely perfect..

Very easy install . If you had to take down not to easy.

This was a great video… right to the point, demonstrations matched audio, you only talked about relevant content and you addressed hiccups that could happen. Can’t wait for my DIY❤

I did it yesterday, without not seeing any video, anyway, good video

I really wanted to make this today but the site is down :( :(

Thank you, now I'm gonna do this instead of painting,

Thanks for this video showed us what we needed to know and hepled with details and wasnt a bunch of stuff that we didnt need to see. I am going to get my Peel and Stick Wall Paper now

I am so glad I found your channel this is a game changer for renters