![Dan Burkhart](/img/default-banner.jpg)
- 231
- 5 608 528
Dan Burkhart
Registrace 23. 01. 2011
Gearhubs demystified, bike rides documented, and other cool stuff.
Triplet bicycle wheel hub with a standard rim
A triplet bicycle wheel has two drive side spokes for every non drive side spoke.
This design makes sense because the drive side carries most of the load due to the steeper angle of the spokes to accommodate the cassette.
The nipple holes in the rim should be angled to match the spoke direction, but in this case, the customer brought me the hub and rim which was drilled for standard spoke pattern.
Let’s see how bad it turns out.
This design makes sense because the drive side carries most of the load due to the steeper angle of the spokes to accommodate the cassette.
The nipple holes in the rim should be angled to match the spoke direction, but in this case, the customer brought me the hub and rim which was drilled for standard spoke pattern.
Let’s see how bad it turns out.
zhlédnutí: 102
Video
Park TS 2.3 vs TS 4.2
zhlédnutí 125Před 21 dnem
Time to upgrade from my trusty twenty year old TS2. Do I go for the TS 2.3 or the TS 4.2?
Freeing frozen nipples from a carbon fiber rim
zhlédnutí 423Před 8 měsíci
Aluminum spoke nipples in carbon fiber rims can be problematic. Here is a situation where the nipples actually fused into the rim and I had to take extreme measures to remove them.
Diesel heater first start
zhlédnutí 1,1KPřed 8 měsíci
First start attempt I got an error code. I just didn't prime the fuel pump long enough.
Making my Morizumi spoke threader more user friendly
zhlédnutí 966Před rokem
Newer models of the Morizumi spoke threader have a knob on the guide plate. When I purchased mine ten years ago, it did not have it.
Shift cable replacement Sram S7
zhlédnutí 12KPřed rokem
How to change the shift cable in a Sachs/Sram S7 twist shifter and how to adjust the clickbox
Adding a counter to a Morizumi spoke machine
zhlédnutí 502Před rokem
Adding a counter to a Morizumi spoke machine
Calibrating a Park Tool TM1 spoke tension meter
zhlédnutí 5KPřed rokem
Calibrating a Park Tool TM1 spoke tension meter
Checking the tension meter calibrator for accuracy
zhlédnutí 1,8KPřed rokem
Checking the tension meter calibrator for accuracy
Our 7x12 Cargo trailer conversion Episode 15 The completed build.
zhlédnutí 1,8KPřed 2 lety
Our 7x12 Cargo trailer conversion Episode 15 The completed build.
Our 7 X 12 cargo trailer conversion Episode 14 Installing a window in the door
zhlédnutí 6KPřed 3 lety
Our 7 X 12 cargo trailer conversion Episode 14 Installing a window in the door
Replacing a nipple in a Giant P SLR 1 rim
zhlédnutí 2,1KPřed 3 lety
Replacing a nipple in a Giant P SLR 1 rim
Fixing a loose bicycle fork crown race part 2
zhlédnutí 1KPřed 3 lety
Fixing a loose bicycle fork crown race part 2
Fixing a loose bicycle fork crown race
zhlédnutí 2,5KPřed 3 lety
Fixing a loose bicycle fork crown race
Our 7 X 12 cargo trailer conversion Episode 13 Installing a window
zhlédnutí 7KPřed 4 lety
Our 7 X 12 cargo trailer conversion Episode 13 Installing a window
Our 7 X 12 cargo trailer conversion Episode 12 Connecting the solar panels
zhlédnutí 2,6KPřed 4 lety
Our 7 X 12 cargo trailer conversion Episode 12 Connecting the solar panels
Our 7 X 12 cargo trailer conversion Episode 11 Electrical phase 1
zhlédnutí 1,6KPřed 4 lety
Our 7 X 12 cargo trailer conversion Episode 11 Electrical phase 1
Our 7 X 12 cargo trailer conversion Episode 10 Installing the shore power receptacle
zhlédnutí 4,3KPřed 4 lety
Our 7 X 12 cargo trailer conversion Episode 10 Installing the shore power receptacle
Our 7 X 12 cargo trailer conversion. Episode 9 wireless brake controller
zhlédnutí 1,9KPřed 4 lety
Our 7 X 12 cargo trailer conversion. Episode 9 wireless brake controller
Our 7 X 12 cargo trailer conversion Episode 8 insulating the back doors
zhlédnutí 3,2KPřed 4 lety
Our 7 X 12 cargo trailer conversion Episode 8 insulating the back doors
Our 7 X 12 cargo trailer conversion episode 7 Lame excuses
zhlédnutí 1,5KPřed 4 lety
Our 7 X 12 cargo trailer conversion episode 7 Lame excuses
Our 7 X 12 cargo trailer conversion episode 6 Insulating and paneling the ceiling
zhlédnutí 1,9KPřed 4 lety
Our 7 X 12 cargo trailer conversion episode 6 Insulating and paneling the ceiling
Our 7 X 12 cargo trailer conversion episode 5 Unboxing the ridiculously huge 4000 watt inverter
zhlédnutí 1,5KPřed 4 lety
Our 7 X 12 cargo trailer conversion episode 5 Unboxing the ridiculously huge 4000 watt inverter
Our 7 X 12 cargo trailer conversion episode 4 Amazon delivery
zhlédnutí 2,1KPřed 4 lety
Our 7 X 12 cargo trailer conversion episode 4 Amazon delivery
Thanks for make this video! ❤❤❤
Nice to see you! Thx Dan
Do you know if that Sturmey Archer RX RF5 or RX-RK5 transmission can support a pedal vehicle that weighs 270kg without breaking?
Any chance you have a video on where springs go on this old recliner? 3 out of 4 of mine have come off and I can't figure out where they go back!
Walter Cronkite is back!
And that's the way it is.
Fascinating, are real marvel of mechanical engineering. Well explained too.
Great video. I have a project where I want changeable gears without a freewheel (kids pedal tractor). Is there any hub that can achieve this? the freewheel in this video is unfortunately integral to the operation of the hub, I was hoping that I would be able eliminate it.
Don Franks?!
This is great upgrade
Great content, thank you.
Does grease on the outboard bearings really “seal” the hub? Doesn’t oil (ATF) dissolve grease?! Seems like a short-lived solution. On my Shimano Alfine 8 hub, I did this using 80w90 gear oil to soak the internals (refuse to pay ridiculous price for Shimano special IGH oil), Shimano IGH grease on outboard bearings (as well as on roller clutches as recommended, etc). After just 100 miles, I opened it back up, and the grease was watered down and almost same viscosity as the oil!
Nice 🚲 bike👍
I have an R900651088. Can anyone help me, please?? Thank you!!
Have you ever done a video how you got started off in the bicycle industry? Will you ever consider it? Thank you 👍
Not something I ever considered but thanks for the idea. I came to it relatively late in life after a totally unconnected career.
@@2wagondragon I believe you were a truck driver and obviously mechanically inclined and that's where the connection might be thank you so much for your videos 👍
TANK YOU SO MUCH, thanks to your video our recliner is fixed, so simple too.
I was nine years old when I first saw this show. I never missed an episode! I was a huge fan and watching them again brings back many happy memories of a different time.
SA 1st gear doesn't engage. Took it apart, greased it and oil....everything seems to be ok but it still 1st gear doesn't work. Any ideas what could be wrong ?
Hi Again The Bike Is A Centurion Challenger 6061. Thanks M England.
Trying 2 Take Old Cable Or Try 2 Fix Old One Been Trying 2 Take A Part The Sram S7 Grip Shifter Not Much Luck. Great Video By The Way. Have Done The Sram S7 On The Bk Wheel. My First Time In Doing This Make Of Bike Any Advice Would Help Many Thanks M England Will Try And Send Video If That May Help Take Care All Best .
Asante sana rafiki, the last one is the best of the best. I loved it , after 12yrs am seeing this wow , kazi nzuri sana na ubarikiwe
Very helpful, though I have a different model, with the return spring not engaging. Now I got some confirmation how it is supposed to work
Beautiful beautiful truk. Take me bak to when trux like that ruled the road.
Besides the Electric Shifter ( MU-S705 ) Why is one hub Electric Shift ( SG-S505 ) And one Mechanical/Cable shift ( SG-S501 )? Why can't you put the 'Manual/Cable' shift on the SG-S505?
The SG S505 has no shift return spring. The stepper motor does the shifting in both directions. a mechanical shifter would not work unless you cobbled together a two cable pull pull system.
Are all the ball-bearings 7/32"?, there's nothing in the SRAM Tech sheets. Much obliged.
Been a while since I had one of these hubs apart but 7/32 sounds right.
@@2wagondragon Thankyou!
Hi Dan do you happen to know if the spring inside the click box can be purchased ? The replacement unit I ordered 2 years ago from one where on the internet has decided it hated life and corroded in half.
Maybe this man is a genius ?🤔 Thank you for this outstanding video !
I used to watch this show with my dad because he was a truck driver I was in kindergarten I always remember this show I like it alot once he took me to Fresno to pickup fruit thru the grapevine I felt like cannonball great feeling.
Can you please find other episodes
Great video, thank you!
If you aren't paying attention. This type of action is exactly what don j.t. is all about. It's not anything that is good for this nation.
Does hammering on the removal tool cause the RH bearing to get damaged? The hammer blows pull the cone down over the balls. Thank you.
Don't you need to install a washer with these nippels?
No washers necessary for these rims. I have yet to encounter internal nipple rims that require washers, but I know they do exist.
its already a year but ididnt have it
Very interesting gearhub system! Nice to have the comparison to the sturmey archer gearhub! Haven’t seen before. Thx for documentation!
Excellent Dan and still current info. Thankyou for the explanation
There is an interview with Ray on CZcams, he talks about the truck. What a real hero
Damn I felt so left behind 😂
Merci. J'ai un Raleigh de 1963. " Modernisé" surtout au niveau éclairage. Mais pour le réglage du moyeu ce n'était pas simple. Heureusement que youtube existe. Mais mon dieu que vous êtes " compliqué" les anglais 😂. Ma Jaguar 2,7 V6 ....il y avait un jeu de cale pour régler les tiges culbuteurs lorsqu'elles prenaient du jeu.Tout cela au bord de la route.... tellement british 😉
Did they ever wash that rig?
How does the doc control the bleeding? Inthought Jerry was driving to the nearest phone not the nearest town. Hevwas supposed to hone for an ambulance.
I vaguely remember seeing this perhaps when originally broadcast.
Back when this series first aired there was a guy that worked with my Dad who quit that job and became a truck driver. From then on every time we saw him we'd say "Hey, Cannonball!!"
"The Romeo of the road" hahaha. I'm just a little old man now but once upon a time that was me!
Ginny & Jerry....He loved her...but loved cannonball more....weeee!!!!
What kinds of shenanigans are those whacky Canadians up to now?
Good old Cannonball, the blabber-mouth...
HAHA! Now if a middle aged truck driver asked the police if he could feed and bathe a couple of runaway kids before turning them in, he'd be in hand cuffs very soon. Times sure have changed.
A carton of smokes in 2024 near 100.00 not today my friend.
In 2024 I pay 19.99 for a carton of smokes....2.37 for a single pack.... Missouri...