- 246
- 11 290 250
pazi88
Finland
Registrace 18. 03. 2011
Sipa's BMW garage. Mostly some BMW e30, e36 stuff. Engine builds, burnouts drag racing etc.
Video
300hp N/A M52 project. Part8, first start
zhlédnutí 14KPřed 5 dny
It's finally time to start this NA project engine for the first time. Getting the last details done, has been surprisingly slow process and this video has been in the works for half a year now. The MRT Engineering ATI damper kit: mrtengineering.fi/products/bmw-ati-super-damper-installation-kit Bigger alternator pulley from MRT Engineering: mrtengineering.fi/products/bmw-m50-m52-m54-s50-underdri...
8HP Swapping my BMW E36
zhlédnutí 16KPřed měsícem
I'm not a fan of automatic transmissions, but still. I'm swapping 8HP45 transmission from N55 to my 328i manual e36 and showing how it's done on this video. CANTCU website: www.canformance.net/product/cantcu-transmission-controller/ CANTCU article at ms4x.net: www.ms4x.net/index.php?title=CanTCU_Integration
I finally got big ultrasonic cleaner!
zhlédnutí 7KPřed měsícem
VEVOR EU wanted to sponsor my Channel, so I got big 30 liter ultrasonic cleaner from them. On this video I'm checking it how well it works to clean car parts. Affiliation link for the Ultrasonic cleaner I had on this video: s.vevor.com/bfQWF7 The 5% discount code: VV2324 Vevor also has smaller ultrasonic cleaners available, like: s.vevor.com/bfQ2OU
300hp N/A M52 project. Part7, wiring
zhlédnutí 12KPřed 2 měsíci
This video to wire up the new M52TU engine swap to my e36 chassis has been in the works for 6-months, but now it's finally done. It might not look like it from the video, but this wiring took tremendous amount of time to do. Even though being relatively "easy" thing to make. Pinouts and connector part numbers can be found from ms4x.net wiki: www.ms4x.net/index.php?title=Siemens_MS45_Pinout If y...
ATOTO F7XE Review and Install
zhlédnutí 5KPřed 3 měsíci
Purchase and discount links: 👉DE: amzn.to/42ZTSwY 5% code: ATOTO6OA 👉FR: amzn.to/42Voqj6 5% code: ATOTO6UF 👉US: amzn.to/3SVkaff 5% code: JJQEHK8U #atoto #atotof7xe #carstereo
Getting the X5 back on road
zhlédnutí 10KPřed 5 měsíci
I'm finalizing the M54B30 rebuild on this video and finally getting the BMW X5 back on road after lot of wrenching. -15% of the Armytek products using code PAZI88 at: www.armytek.fi/ Headlight covers at eBay: ebay.us/qGsW5g Headlight covers at AliExpress: s.click.aliexpress.com/e/_DmTADPT
Plans for 2024 and fleet update
zhlédnutí 12KPřed 5 měsíci
Quick check on our BMW project cars and then plans for 2024 CANTCU site, for more info: www.canformance.net/product/cantcu-transmission-controller/ 0:00 Intro 0:31 My M52 turbo E30 2:20 Petri's the ONE 7:01 V8 E12 7:57 X5 8:27 E36 12:40 8HP swap 16:39 CANTCU 19:29 Summary
Fixing the seized X5 engine
zhlédnutí 14KPřed 6 měsíci
Winter in Finland is getting worse, so I really need to get this new winter beater X5 on the road. So in this video I will rebuild the seized M54B30 and we will try starting it first time.
Taking apart the BMW X5 engine
zhlédnutí 13KPřed 7 měsíci
I just bought this -04 BMW X5 for cheap with seized engine. On previous video I did investigate what is going on with the engine. And on this video I will pull out the engine and take it apart to see can it be saved.
I bought BMW X5 with blown engine
zhlédnutí 19KPřed 8 měsíci
My old e39 winter beater starts to be bit too rusty and I don't have time to fix all that rust properly. So I have been looking for rust free and cheap BMW to replace that. And now I finally found it and of course it's broken. In this video I try to figure out what has gone wrong in it.
New project car for the channel 🤔
zhlédnutí 4,5KPřed 8 měsíci
Bimmerparty 2023 Vlog
zhlédnutí 13KPřed 8 měsíci
Tässäpä pikkusen videonpätkää meidän reissusta tän vuoden Bimmerpartyille www.btcf.fi/?page=bimmerparty
Getting my E30 back on road for summer 2023
zhlédnutí 11KPřed 9 měsíci
Follow up video to my the previous e30 wrenching episode in which I added oil sump baffles for the m52 turbo engine and swapped in the MRT Engineering bump steer and roll center correction kit. This time I will do the finishing touches to get the car back on road. And lastly some thoughts about how well the mods worked. 20% off from the Gauge.S price with this link: pazi.sorek.uk/ Or use code P...
I designed STM32 MCU card for Speeduino!
zhlédnutí 11KPřed 10 měsíci
Some time ago I did design this Arduino Mega replacement board for Speeduino ECU that uses STM32F407 processor. With this processor board you can have all the modern features that Speeduino offers, on your old speeduino ECU just by swapping out the processor card. My GitHub page for this board: github.com/pazi88/STM32_mega PCBWay to order boards: www.pcbway.com/ STM32Cube Programmer: www.st.com...
300hp N/A M52 project. Part6, engine install
zhlédnutí 27KPřed 11 měsíci
Time to drop in the newly built NA engine to my old BMW e36. But before that we will put the old engine back to running condition and see if it runs as it should. And then we will pull it out and replace with the new one. MRT Engineering damper adapter: mrtengineering.fi/products/bmw-ati-super-damper-installation-kit Damper itself: www.summitracing.com/parts/ati-917071
Hi Pazzi I have a M50B25tu engine just wondered what must be done to my cam tray to fit these cams also do I use the vanos unit from my M50 intake cam ? Can I also use Intake Cam from M50B25 Non Vanos in my M50B25tu engine as exhaust cam ?
Just curious. Did you torque down the cam caps
Yes. Not sure if it was clear on the video.
@@pazi88 what kind of torque wrench do you have
@@Thomas-fc6gf basic mechanical Bacho one.
next episode soon? ;D
Hopefully, and not after half a year 😁
Out of curiosity, why ms45 over ms43? Such an awesome car mate!
I did mention the reasons in the previous wiring part of this video series. But anyways, I use ms45.1 because of the dual wideband O2 sensors. And then also because the ms45 has torque modeling, which makes it feel way more modern than ms43. And that also helps with the 8hp-swap. Which also benefits from the fact that ms45 also supports more modern e60 CAN protocol.
0:33 still waiting for that "Tervetuloa Sipa parkkihalli".. i guess its not coming 😁
Mihin oot pistäny ton ecun mapin? Itellä ongelmia sen kanssa.
Eikö tuolla kuvauksessa oo linkki?
Superb results! You are a legend.
Hello bro ... Thank you so much for your beautiful video and information.... But i wonder what l shifter A/T you are using and can be also DTC 7HP ?!!!
I'm using F-series 8-hp shifter, because those are cheap. But cantcu wiki has list of supported shifters: wiki.canformance.net/doku.php?id=cantcu:supportedshifters
Great video!
Forgive me if i'm out of my lane here, but i believe that changing the stoichiometric AFR was a mistake. Since MS45.1 reads Lambda with no real interpretation to AFR you just made it target Lambda 0.67, thus making it run really rich in the clip with the good airmass meter. Instead compensate for E85 in your ron98, idle and cold start fuel maps and leave the stoich value at the stock 14.7 for MS to target Lambda 1.
Based on FR, that setting affects injected fuel amount and also some calculations that model the mass of the fuel and air moving in intake. It "should" work correctly like that and so it seems, with quick testing I have done. It doesn't affect lambda target. It still follows the set lambda target from the maps.
@@pazi88 I see, you clearly know more than me. I wish you good luck and I look forward to seeing your result!
@@DuffBeerLover Yeah, lets hope it works nicely. I did already swap in new OE MAF and it runs perfectly now, even without any further tuning. So it looks like that was the fault indeed and I can continue tweaking the maps to suit the engine.
Great content and channel, love the build, appreciate you speaking in English aswell 👍
Kuulostaa siltä että olet vaihtanut nokka-akselin :)
On vaihdettu jo moneen kertaan 😅
i wish you could do this for a living. id watch every video
Any link to thoes cams? Or where to find them? 272 and 256 that sounds like the metric mechanic regrinds they make from u.s. S52 cams
I have another question. M50b25 engine. I want to fit in e46 and want to use ms43 ecu and now because m50 only have at front crank position sensor can i use the 60x teeth trigger wheel with hall sensor?
Yes, you can use the front trigger wheel with ms43 too. It just needs to be from m50 vanos version.
@@pazi88 that great. Yes the engine it is m50b25 vanos model. And I will want to try make twin vanos and use the ms43 ecu.
Nightmare...!
??
Muistakko ku joskus lähetin sulle winols checksumeja, pientä sääntöä sekin 😂
Etäisesti joo 😁
Thank you for speaking english. I watched your videos with subtitles before, because my finnish is not existing. Much apprechiated
nice from you to show how things are done, including part numbers and software stuff, like it!
Mullaki Lexus hybridissä 14:1 puristukset onko sekin siis racing ready?
Melko seppä oot😅💪🏻
what gas will you run with such CR?. im guessing 98? nvm.. u said E85 but i wanna know if u have flex sensor in case there's no E85 available
E85
@@pazi88 u beat my edit. didnt realized u alrdy replied 😂 so, in case of no E85, 98 is mandatory?
@@n.shiina8798 Even with 98, it will prolly detonate to pieces. E85 is mandatory. But it has good availability here, so no problem running E85 only.
@@pazi88 dang. there goes my plan. what's the safe CR for 95-98? 12.5~13?
@@n.shiina8798 It depends from the cams. 13 is doable with 98, but it requires such big cams, that it won't really pass emission tests. 11-11.5 is roughly what works with basic performance cams.
my man, does bmw has any engine that is reliable? thinking about buying one but always got disappointed after a quick search about the engine of the model tried to buy.
Well all m5x engines are 😁 almost non of the 4-cyls after m10 are reliable.
Every single one up to and including the m54 e46.
i see pazi, i click like already.
I hope these don't get expensive as fuck as 2jz 1jz did, they used to sell the whole car with a 1jz motor in it with 500 bucks. now the block alone is 5000 😂. i wish there was some tcu that could control fwd dual clutches
Hey, arleady I have e60 ms45. Can i Connect the ms45.1 dme without change the wiring harness. I know there is a diffrent between lambda sensors. Maybe i can just modyfity the lambda connection plug ?
Yes, that should work. Only real difference is the lambda sensor part. E60 came with ms45.1 in US, so you can flash in correct software with winkfp.
Blokkaa kyllä kovasti ilmavirtausta lauhduttimen edessä tuo fööni. Eihän siinä pitää ilmastointia vaan päällä
Se tulee PWM ohjattuna ECU:n kautta käyttöön, kunhan kerkiän kytkeä sen kiinni. Siksi pistin vielä viskon paikalleen, kun tuo sähkönen ei oo vielä kytketty.
@@pazi88 nii justiisa ei o tehtaan jäljiltä tuommonen. Onko tuo joku E60 600w mörkö taifuuni?
@@mannine99 Tuo on ihan E36:n ilmastoinnin orggis flekti.
What hardware do you use to flash/read/write ECU?
This: www.ebay.com/itm/285716789174 But generally basic INPA-OBD cable works fine. But ms45 seems to be picky and needs that better one.
Keep us posted on those cams!
What do these 10.9, 12.9 numbers mean?
Those tell about the bolt strength: boltdepot.com/Fastener-Information/Materials-and-Grades/Bolt-Grade-Chart
englannin puhuminen parantunut huomattavasti! hyvä homma ja mahtavaa että saa hyvää kontenttia taas. kiitos!
Honey wake up, pazi88 posted new video
Bravo, Waiting for so long. Hope you can get it up to 300hp, Pazi.
intrested in the cams, where to look out for the production run ?
very well done.
Nice! good to see it runing. Mine 36 sudenly started runing like shit few days ago, cyl.6 4bar compresion. x) So i´m gona pull head off first time in my life lol, hopefully i dont brake it even more :D Nice video!
Nättiä!
If I remember correctly drift guys put audi 3.0v6tdi pulley on bmw powersteering pump, because its way bigger, for drifting when bashing limiter and doing a lot lock to lock turning it also overheats. It prelongens the life span of pump. Only drawback is that pulley is big enough so power steering is a bit heavier on idle, but same on little throttle. You will not be idling on 700 anyway with high comp.
I have a lot of BMW's and a V6 TDI here. Im going to check it out later today. I already have some of the ecs underdrive pullys.
I've been waiting for this video over a year!! Finally its here :) I want to build a similar engine on my channel as well, this gives me a lot of motivation :)
Yooooo pazi how the fuck did u time the engine without the timing tool broooo tell me, there is no guide without tool online anywhere!!!!
Mega Work ❤
I was waiting for this for ever!!!
🎉 hardly wait to see the results!
I see X201 I click like!
Moi Pazi, where did you get MS45 definiton file for Romraider ? Would be possible to share with me ?
I made that: github.com/pazi88/Siemens_ms45_RR-definitions
@@pazi88love u
@@pazi88 Thanks, i really appreciate your work. Might you do have a definition file for MS41 which has extended/rescaled RPM axis up to 7000 rpm for fuel and ignition maps ?
Why is there a need to set afr? Can this parameter be used to quickly switch fueling from gas to e85 for example?
Yes. Flex fluel cars do this from the factory.
I really like that you add/mention the torque specs and part #'s. Thanks for another great video Pazi! Can't wait to see it running and driving.
a 6 to 1 , sequential fire runner would make it sound really crazy
Congratulations! 🎉 Why stock ECU and no use speeduino or kdfi? ❤
I did tell about on few of the earlier videos. But I use ms45 mainly because it has proper torque modeling and because of that, it works well with 8hp.
👍