Video

Thanks for the visit

Ya i don't really like that type of wild life, i think i have a few of the issue sorted but still thnking of swapping to the Fusion SE 1200kv to solve the ESC issues.

@@radioactivescalerc, I do find the Rc4wd rtr electronics are a bit week over the years, also after watching the vid I notice you shared my latest vid through your channel, thank you very much I greatly appreciate the support, happy trails bro 🤘🤘🤙🤙🇨🇦

Ya not to impressed with this one, motor seems ok just the ESC that is not so good. Can't even get it to calibrate the reverse on it, it's like it only Wil calibrate neutral and throttle and I have it programed for forward/reverse mode

Love that terrain as well! I would love to have a few hours there. Nice, scale features.

Ya it was a total shit show, mostly my mistake for not putting it on the programing card. i spent last night working on it a little, got the drag break sorted i think and working on finding the click and why the ESC was cutting out on me. might just take the plung and change the motor to the Fusion SE.

@@bcochener it is a awesome location for all different types of terrain, later in the video a spent a lot of time in on location seeing how it could climb the terrain, i enjoyed that and i didn't go as far as i normally do because of the issues. I will get it out again with the changes i make and see what happens.

@@radioactivescalerc Fusion... I think you just solved the issue!

@@radioactivescalerc yeah, the little wash out ravines were just perfectly scale. I always like crawling in creek beds or wash outs for all the natural formations like that.

Thanks Donna appreciate your support, I will figure it out. Spent the night going through everything, go drag break working and think the click is in the trans

Ya it got the heart going for a minute or two, I pushed it hard and beat the hell out of it, I have no clue what the click is, Spent time with it on the bench when I got home, I think I have the drag break figured out, put a hobbywing program card on it. Check to ensure all lockers were engaging fully, so might be in the Trans. Might have to tear into it. Thanks for watching and commenting 👍

I totally agree, they were not cheap but totally worth it. i go a set of black ones off of amazon for the Jeep as i like the black look on it better then the silver. they always discontinue the good stuff, not sure why they did that. thanks for watching and commenting.

Thanks Bro, it's hard to move on from the loss of your mom. i wish you all the best and for your mom, god bless her and her fight !!!

Thank u what length shocks u recommend for good articulation?​@radioactivescalerc

@@mikeinvegas1 I like the 43 to 48 mm shocks, on this build I put the Injora 43m Shocks and i gets great articulation, i used the same on Both my Injor rock buggy builds .

I love the look of the body also, going to get another body and put my own preferred color on it but it should be a fun rig out on the trails. thanks for watching ad always, and the support

Thanks 👍 appreciate your support

I am going to get the IFS version also my local shop will order it for me, the non IFS is the same setup as the ecto and the Gatekeeper and they are awesome capable rigs. Thanks for watching and commenting 👍

Any issues with the diff ring gear in the front stripping with the ifs2? I'm on my 3rd. They have lasted 15 each. Not really rough crawling either. Never had a problem with any other element I've had.

@@icyfs3036 No I haven't had any issues with the Ring and pinion gears in the IFS2. I beat on my Zuul pretty hard in my last run, and no gears have stripped so far. Have you replace the bearings ?

@@ManitobaRC brand new ifs2 in a brand new knight runner.

Thanks for stopping by Donna

It's a sweet little brushless motor, need some new wheels and tires and a little body work and it should be a awesome little climbing rig. Thanks as always for the support 👊 🇨🇦

Thanks Dirk, had it for awhile just got to getting it out of the box. Appreciated your support

Thanks GURU, brother the support is apperciated!!

Awesome, i picked up a set of Parallel splitters so i will be running them togther and i just pick up the Hoovo 10000Mah 120c 3s, so theat should keep me running for a good 4+hours. Thanks for watching and commenting, stay safe out there on the trails!!!

Cheers Big Z, you have a great long weekend also, rain and cool here. It's not great for trailing but I'm hoping to get this new rig out for a run.

Nice Jake, i loce the RC4WD Rigs, this one is different so i had to have it. can't wait to run it. Have a great weekend also my friend!!

It a pretty detailed Rig, I am a bit of an RC4WD Freek, i have a good collection of them so far and i am sure more to come.. Thanks for watching.

Should be ab interesting rig for the Coulees, looking forward to running it. Thanks for watching!!

Ya if and when i decide to swap the motor and ESC out, it is a a crazy amount of work to get it all apard. should be a fun rig as is for now.

Finally. Great video man.

@@rc_newf I know right, thanks for checking it out, need to get some wheel hexes for it. i do not like the way the wheels are on it. time for a better wheel setup.

Man, it looks sooo good! Why are all the sick looking cage RCs always a bitch to work on (thinking UDR)? Cheers!

That's is exactly the issue, so cool to look at and run but such a pain to work on, I have been trying to find a set of wheel hexes to replace the Stock wheels and non of the rc4wd regular hexes fit. The Stock wheel set up is very scale but what a pain to take off and change.

Ya they are not cheap here in Canada either i think i paid $70Cad for them, but they do give the rig the look I was wanting.

Thanks Brother, i sure hope they are not as bad either, not starting off good this year.

Thanks Bro, totally love these rigs. Thanks for the support. It's much appreciated. Keep wheeling and be safe👊👍🇨🇦

@@radioactivescalercI hear bro, love these big rigs, enjoy the wheather and have a great week 🤘🤘

@@brianjones9174 You have a great week also Bro.👊🤟

Cheers, thanks for watching, we may be able to get a trip planned we will have to look at a firm date, and I would suggest during the week as the canyon gets busy on weekends. Let me know what you are thinking and I will see if I can make it. I am starting to figure these big boys out also, I need to get some brass in the front to hold it down better.

Thanks Josh

Thanks Big Z, they are so much fun I can't leave them at home when I go out. The 1/10s may be sitting alot the summer. Lol👊

Thanks Durp, it was a great day. After watching the video so I could get a better look at how the truck was reacting, I started looking for some front end brass. Thanks for watching and commenting as always.

Thanks, was a great day. A little long video but I took alot of footage and used it all. Stay safe out there and go crawling.

Thanks Donna, hope you had a great day, thanks for stopping by and leaving a comment. The support is greatly appreciated 👍

It works great. I took a small toy wheel and 3d printed the small mount and drilled a hole in the thumb control on the radio and used a srew to mount it. simple mod that works for me

I charge them with a JST charger adapter and on the balance board of course, I made the adapter my self for my charger. SKY RC T200 Charger.

@@radioactivescalerc i see i suppose i could try splice some wires ty

Thanks mate, it was a fun course to build still working on it all the time adding for details and more rocks and stuff, I do wish i would have thought it out a little more and added more real rock but it turned out ok for the space i have. thanks for checking out my channel.

I only have the swampers, but looking for a set of Bajaj I have been told they are amazing, the swampers are way better then stock also.

Thanks for subbing the support is appreciated!! Stay safe out there

Ya thats the old look of the rig, since I have put on shorter shocks and it has become a shelf queen as it is in min shape and a little of a collectors rig now.

Cheers Bro, thanks

Thanks Bro, i also find the that the Honcho is quieter, i may need to open up the trans on the JLU and get here packed with better grease to get it a little quiter.

Thanks Durp, had posted nothing in two weeks had to get some content up, so spent some time editing the combined SCX6's in into this little production. Did a bunch to the JLU this past week, Can't wait to get it out on the trails, looks so much better.

@@radioactivescalerc What you add to it? Performance or looks? Or both! ?!?! lol

@@DurpVonFronz did the body up a little, put on some custom decals i did on my cricut, painted the roof and grill black. Resin printed the knight Customs door and roof hinges to replace the decal ones and also priinted the fron grill which is like the 1:1 grill. looks sweet. if you have instagram i posted pics.

Same Shocks on both rigs, the links on the red are injora 50mm fronts and 58.5 rears. C10 link size. thanks for watching and commenting, the support is appreciated

Thanks, I appreciate the support. I think they have become my favorite rigs. Trail on and stay safe🇨🇦👊👍

Thanks brother, loving these rigs, starting to become my favorite

@@radioactivescalerc hey I sent ya a e mail I got the package 👊

Awesome live tonight glad you like the scale accessories brother. Thanks for opening it on the live and waiting for me to show up. Trail on and stay safe out there 👊👍🇨🇦

Ya for sure I do now that the Stock servo works better in the honcho then the JLU. I am sure there will be some other differences as I trail them more. Thanks for checking the video out and commenting 👍👊

If you are thinking about wanting one, all I can say is just get it. I was the same for months then I just did it and now I have both version

@@radioactivescalerc​​⁠ oh man, I waffled too long back when they had the Honcho for 799. I think I’ll be in on the next sale though for sure. Still kicking myself a bit

@bcochener ya they are a hit to the wallet that is forsure, keep a lookout for a used or a another sale, you will not be disappointed spending the bucks.

Thank you very much!, appreciate the support

They really are, totally hooked on them, such a different experience. Thanks for watching and commenting.👊👍🇨🇦

Thanks Bro, it was a perfect trail day, a little bit of a long video but had alot of video to share. Thanks for watching and commenting 👊👍

Thanks for watching as always durp. Totally agree, watching these rig move is just awesome. It was an awesome Day to hit the trails. 👊👍

Thanks Dirk, loving the SCX6, totally awesome scale to drive. Sure hope they do not come out with another version, I have no more room for another👊👌👍

@@radioactivescalerc funny

Awesome, the honcho is a beast also, 750 is a sweet price if its in good shape. I am hoping to get to Horseshoe canyon again this summer also. the Coulees here are a little differnet then there. I found the Canyon had alot harder surface to to coulee. thanks for watching and commenting. the SCX6 is a awesome driving experience, got the honcho trailed it and had to have the JLU also.

Verson 2 is still my preferd for it slow crawl but i like V1 for it ability to use furitek products with it.