- 81
- 3 489 853
SanDiegoHotRod
Registrace 10. 02. 2010
The channel devoted to anything that has wheels, wings, goes fast or is just plain cool!
Presented by www.corvettesandcustoms.org and www.snowproductions.net
More cool stuff can be seen at corvettesandcustoms
Thank you for watching. More cool videos and original TV shows coming soon!
Presented by www.corvettesandcustoms.org and www.snowproductions.net
More cool stuff can be seen at corvettesandcustoms
Thank you for watching. More cool videos and original TV shows coming soon!
Vector Ken Miles Dolphin
After missing 60 years the original body for Ken Miles' Porsche powered Dolphin America has been found!
Shannon Wafford from Corvettes and Customs in San Diego uncovered the car in a shed. He was doing research for his upcoming feature length documentary film "Vector: America's First Supercar" when he came across the missing car.
Not many people know that the original Ken Miles Dolphin America was used as the chassis for the very first Vector "prototype" mock up in 1972.
This is an excerpt from the documentary film "Vector: America's First Supercar"
copyright © 2024 www.snowproductions.net
www.corvettesandcustoms.com
corvettesandcustoms
Shannon Wafford from Corvettes and Customs in San Diego uncovered the car in a shed. He was doing research for his upcoming feature length documentary film "Vector: America's First Supercar" when he came across the missing car.
Not many people know that the original Ken Miles Dolphin America was used as the chassis for the very first Vector "prototype" mock up in 1972.
This is an excerpt from the documentary film "Vector: America's First Supercar"
copyright © 2024 www.snowproductions.net
www.corvettesandcustoms.com
corvettesandcustoms
zhlédnutí: 1 174
Video
Vector: America's First Supercar - Intro.
zhlédnutí 1,1KPřed 3 měsíci
Prologue to the upcoming Vector feature length documentary film "Vector: America's First Supercar" Written, directed and produced by Shannon Wafford copyright © 2024 www.snowproductions.net www.corvettesandcustoms.com www.vectorcars.net corvettesandcustoms
Vector Dream Intro
zhlédnutí 182Před 9 měsíci
This film is not yet in production. This is just my "Dream Team" I would like to work with when I produce my Vector feature film. It was cut together with 30 year old VHS tape. My documentary film "Vector: America's First Supercar" is now in post production and being edited for release soon. copyright © 2023 www.snowproductions.net www.corvettesandcustoms.com
James Dean's Last Drive (part 1)
zhlédnutí 565Před 10 měsíci
This is a 30 minute ROUGH CUT clip from my feature documentary film "James Dean's Last Drive" I have completed filming and everything is in my edit suite. I just need to finish cutting together the entire 90 minute film to get ready for distribution. It has taken me 8 years and tens of thousands of dollars out of my own pocket to get this far. I have written, directed, produced and financed thi...
1958 Corvette Startup
zhlédnutí 338Před rokem
This 1958 Corvette was purchased in San Diego and went through a couple owners and 64,000 miles before it was parked in 1973. It came from the factory with a 290hp 11:1 283 with fuel injection and a solid lifter cam. The transmission is a factor 4 speed. It also has the factory differential tag showing 4:56 gears. It also came with a factory radio but NO door switches installed for the courtesy...
Emerald Bay Lake Tahoe
zhlédnutí 92Před 2 lety
My trip to Emerald Bay in Tahoe. Scouting for a film location for my Vector film. Would love to film some cars up here. This is the same spot they used for the Cadillac SUV the last couple years. More info at: www.snowproductions.net www.corvettesandcustoms.com www.facebook.cam/corvettesandcustoms Music: "Industrial Project" and "Country Jam" Artist: Passive Aggression CD: Passing On A Curve
2004 Toyota Avalon Clock Stops at 2021
zhlédnutí 5KPřed 2 lety
So I noticed my car clock and calendar were off today. I tried to set it and the damn calendar only goes to 2021 and then starts over at 2002!!!! WTF Toyota??? My Toyota Avalon XLS was the top stuff and cost $43,000 in 2004. Basically it is a Lexus in a Camry body. I went online to find a calendar year that matches days and dates with 2022. I had to set my clock for 2011 so the days and dates w...
Angela Lyn Designs Promo
zhlédnutí 97Před 3 lety
Painter and graphic artist Angela Lyn showing off her skills Pinstriping cars, trucks, boats, bikes, tools and anything you want to add some style to! www.angelalyndesigns.com angelaspinstriping/ Thank you for helping me with my chrome hub caps! Is it pin striping or Pinstriping??? Shan www.corvettesandcustoms.com corvettesandcustoms Painting by: Angela Lyn Designs Mus...
1972 Chevy Step Side
zhlédnutí 278Před 3 lety
When my dad passed away a few years ago he left me with 10 cars and trucks that I had to fix and sell. This is the last truck I have to get rid of. I installed a new carb, new headers, new mufflers, new exhaust tips, new steering wheel, new wire harness front to back, new stereo, new gauges, new gauge bezel and new tires. I really hate to sell it because I always wanted a step side but I don't ...
How To Apply James Dean "Little Bastard" Decals
zhlédnutí 434Před 3 lety
How to convert a 550 Spyder into a "Little Bastard" I make these decals myself and I sell them for $15 a set. A set includes all the decals you need to create one car. A full sheet of decals cost $90 and has enough decals to make 6 cars. All decal sets come with an extra “Little Bastard” decal and extra Nurburgring badge. I do not sell the Porsche badge and shield replica decals. They come free...
James Dean: Sudden Impact
zhlédnutí 66KPřed 4 lety
New forensic look at the James Dean crash. This is a clip from the upcoming documentary film "James Dean's Last Drive." Please come join us for our annual James Dean Memorial Cruise "James Dean's Last Drive" and retrace the last trip of James Dean. More info at: www.jamesdeanslastdrive.com www.snowproductions.net www.corvettesandcustoms.com jamesdeanslastdrive
Paradise Road
zhlédnutí 859Před 4 lety
Take a tour of the real Paradise Road! This is "Mecca" for any real hot rodder on the planet! I stopped in Petaluma, CA north of San Francisco to see the American Graffiti film location for Paradise Road. One side of the road is a golf course and the other side where the 55 crashed is now a vineyard. This is American film and automotive history that is such a huge part of any "car guys" (or gal...
James Dean's Last Drive - Prologue
zhlédnutí 614Před 4 lety
Why I started James Dean's Last Drive. It began back in 2003.....
Racing Around Europe
zhlédnutí 202Před 5 lety
Shortened version of my "Epic Euro Trip" just for car nuts! This 1 hour video covers 3500 miles, 10 race tracks, 5 countries, 4 car factories including Lamborghini and Pagani, and many lifelong dreams! Thank you for watching! www.corvettesandcustoms.org corvettesandcustoms
Le Mans October 2018
zhlédnutí 82Před 5 lety
My Trip To Le Mans in October 2018. This is a short clip from my 2 hour film "Epic Euro Trip" where I drive 3500 miles across 5 countries and visit 10 race tracks and 4 car factories including Lamborghini, Porsche and Pagani. You can watch the entire "Epic Euro trip" here: czcams.com/video/WBldnDjO7Bk/video.html Thanks Shan www.corvettesandcustoms.org corvettesandcustoms
"Twilight Zone" update Monster Transmission
zhlédnutí 444Před 6 lety
"Twilight Zone" update Monster Transmission
I loved that movie. You hardly ever see it on cable. Loved the burrito scene.
Car history 😊✌️🇷🇴
Pretty cool finding the original bodywork! One of the coolest historical cars in the Lingenfelter Collection was restored with the original engine and original bodywork (first v8 corvette "Duntov Mule") - but the chassis was lost to time. It may have been destroyed, or restored to 'proper' 54 blue-flame 6 somewhere along the line... Thankfully the body survived, and the original engine and logbook survived at Smokey Yunich's shop. Just to say - a faithful restoration can exist in many forms.
This commercial is bad ass. That shop is bad ass. 😮
Heard about the gt40?
You mean the race car that was turned into a road car and only 4 were built? Did you forget about the Daytona Charger or the Plymouth Superbird that also went 200 mph? The definition of "Supercar" is not just about speed. Superman was not just "faster than a speeding bullet"
Looking forward to this documentary ! The Vector deserves more credit and recognition, it was in many ways a visionary pioneering work, and arguably even the first HyperCar even, as the contemporary supercars all had considerably less power, lower top speeds, and did not feature anywhere near the level of highly advanced tech on board as well as exotic space age grade materials in their construction. Superb American pioneering work indeed ! May Mr. Jerry Weigert rest in peace, his vision and creation endures and continues to inspire and fascinate.
In a perfect world on "Planet Shannon" I would do a 10 part mini series on Amazon or Netflix so I could really tell EVERYTHING about Vector and all the cars over 50 years........ www.vectorcars.net
Hope it goes into detail about the chassis construction and transmission. Not much info on that.
I have lot of info on all that and there will be some info in the film but there is 50 years of history to cover in just two hours..........😳
Excited to see the full thing.
Right now the date and year is 2024. With month being April 12th. To obtain in this reset your year to 2019 and the day date will be squared up for a few more years. This is because we are in a leap year now. And the Calendar on the Avalon only went to year 2021. Good Luck.
Car made of plastic like barbie doll...lol
I used to love this movie for the cars and stuff but this scene i laugh all the time about a cow pissing on a flat rock 😂
Such a great classic line! LOL
@@SanDiegoHotRod yah and it was not a real popular movie it's one that never gits ran on TV hardy at all..this was one of my favorite movies in the time period it ran it's crazy a good put together movie never gits the respect it deserves..I'm goin watch it again since I seen that it's up on Tubi...
@@SanDiegoHotRod it's just cray to think I was talking about the scenes in it I was laughing cause I remembered the raining one and plastic doll scene what threw me off was when the car broke down and they had it in the shop it had a holly crab on it that was crazy to think that a Lambo has a carb there fuel injected hAaa I'm partial mechanic myself and that was weird to see that..crazy what they did in the 80's I love the 80's stuff...
@@anthonycoach4551 You can see some of my film work on my channel including my upcoming Vector documentary (another 80s icon.) You can also see some of my car work on www.corvettesandcustoms.com and facebook.com/corvettesandcustoms
@@SanDiegoHotRod I don't have Facebook but I'll check it out
To set the clock for 2024 you need to use 2 different years. On Jan 1st use the year 2014 for jan.1st -feb 28. After feb 29 you need to reset on mar 1 to 2015. Problem won't reoccur for another 24 yrs. Hope it helps.
I noticed I had to reset my clock during this last year in 23. I have to reset my clock whenever I change my car battery so no big deal. Just funny that Toyota can't program a simple clock! LOL
TROVARE!!!!
LOL. Such a classic!
"Find" ... in italiano !!!
This movie is really a lot of fun
Yes it is. And if you have worked in the exotic car or kit car industry like I have it is even more hilarious! LOL
If you could set it to 95 it's the same calendar
Yes but the only options on the Avalon are 2002 - 2021.
UPDATE::: About a month ago I noticed my day and date were off again. I went through and tried different years to get the day and date to match. As of May 2, 2023 I set my date and time to 2017 and it gave me the correct day and date............ Keep the faith! ;)P
My 2002 stops after 2018. I guess they decided to add a couple more years for the newer model years. I guess Toyota didn’t think people would still be driving these in 2023. At this rate, ill still be driving mine by 2033 😂
Yep. I think I just reached 75,000 miles on mine. Replaced the rear speaker and still need to replace an O2 sensor but it is in great shape and should last me a few more years! Hey. It's a Lexus in a Camry body with all the options!
@@SanDiegoHotRod wow!! Yours is not even broken in at all! You’re going to have yours for MANY years to come!! I’m still rolling very strong at a little over 170k! I recently drove mine from my hometown in south Jersey to Cleveland and back without a single hiccup from it!
@@potboy1734 I have my trucks and hot rods for running around depending on the job. I got the Avalon about 7 years ago when my aunt passed away. It had 15k miles on it. Like new! It gets better gas mileage than my big block 68 Vette so I use it for parts runs and long distance drives. Been from San Diego to Oregon and up the coast for my "James Dean's Last Drive" quite a few times (check out the videos on my channel). I have also been from San Diego to Dallas and back. No problems and comfortable drive with the leather seats and all the comforts. I need to change 1 of my 4 O2 sensors. The dash lights bother me but it runs fine and I think I have more power! LOL I figure 2 or 300k miles should be doable. Try replacing your air filter with a K and N air filter. It will cost around $50 maybe but you will get better performance and maybe a hair more mpg. Plus you will never have to replace your air filter again. Just rinse it out once a year. Remember, it's better to KEEP it up than FIX it up!
My Toyota Avalon is doing the same thing what's the fix because the dealer says there's no fix.
I reset my date and time but used 2011 as the year. I guess the days and dates line up every 11 years. So I guess it should read 2012 now.
Nice TY Just Found Your Ch.
Thank you. Lots of car stuff, Vector stuff and James Dean stuff on here. More of my latest car and film projects like my upcoming James Dean film and my Vector film on my Facebook page facebook.com/corvettesandcustoms and my older work on www.corvettesandcustoms.com
My toyota avalon doesn't have a rectangle screen. It has a square one with no buttons. It has a small remote control by the stick shift and it's not working do you have any idea why? And is there another way I can operate the screen it's stuck on "press enter"
It could be dirty buttons or a bad fuse. The first thing I would do is disconnect the battery for 10 minutes and then re connect it. The next thing I would try is checking all the fuses inside the car and inside the engine compartment. I would also try spraying compressed air in and around the remote control buttons. Use the canned air like the ones to clean out your computer or keyboard. Then press each button rapidly 10 times in case there is a bad connection inside the remote. Good luck.
Lol i was upset about the same thing. I like that date and time screen. I wish there was a way to hack it.
I have my Dad’s 2004, with a spoiler in back which was a dealer installed option. I noticed the clock situation, so now every January 1, you’ll have to find the previous year that matches, but you’ll also have to check for leap year. 2012 was a leap year, but 2023 is not. So at some point there’ll be a year you won’t have, and you’ll have to adjust again on Feb 28. Sorry if I’m being Capt. Obvious here. 😀
I looked it up and 2011 is the matching year to 2022. I THINK it was supposed to be a leap year also but I don't remember. I just remember it said every 11 years were the same??? LOL
Having a 2004 model with 193,000 miles I noticed this year my calendar doesn't go to 2022. So, all I did was change the year to 2005 and now the days are correct with the date. Who cares what year it is, besides if you are still writing checks it takes most people about 4 months to write the right year down? Problem solved for me. Try that. LOL
Thank you for that info! I was going to try to look up what previous year dates coincide with 2022. I'll fix mine tomorrow!! Plus I used to forget & write previous year for months after, I never do that any more! 😊 Don't know how I got better with that
@@celizabethteal1444 2011 has the same days and dates as 2022.
This is my Graci the Green Goose...if you dnt know the year this calendar is not the big issue here😂😂😂
Lol... When I realized this a couple of months ago I knew for sure my 2003 Avalon is old. I turned the screen off.
LOL Like Indiana Jones said "It's not the age, it's the miles" Hard to give up on a nice car from 2004 with only 75,000 miles. They should have had more confidence in their work! Ha.
too funny
"Body is made of plastic like Barbie Doll!" LOL
Same with my 2004 avalon xls wtf is the matter? No more then 2021???
My car got 212325 ODO and still running great
I think the programmers at Toyota ran out of fingers and toes to count on! My 2004 Avalon only has 75k on it so I still consider it a new car! I did have to replace the rear speaker though. Dried out in the sun.
@@SanDiegoHotRod Was the speaker cracked? I haven't had a chance to CK mine yet; I've only had it about a month. Mine has 149,000 so glad to hear others have more miles. Mine still looks so nice, leather seats are in great shape & so is my dash. One thing, it didn't have a manual in glove box, so does the XLS have heated seats or was that an option? And if it does, where the heck do I turn them on?
@@SanDiegoHotRod I meant to add that I saw a video on that issue with speaker and the foam that goes around it was loose, which causes it to rattle. If the actual papery like stuff isn't cracked, I can buy a kit for$26 to replace that foam
@@celizabethteal1444 I got my Avalon from my aunt when she passed away 6 years ago in AZ. I did have to replace my rear speaker. The paper or glue dried out and it started making noise. It took me a while to find a decent replacement speaker but I ended up buying this one: www.amazon.com/gp/product/B0013C9ZAK/ref=ask_ql_qh_dp_hza?th=1 The Pyramid WX85X speaker has a plastic cone which helps in the heat and sunlight. I had to cut the factory connector but was not a big deal to swap the speaker. I put it in 5 years ago and it still works great. For $50 I would rather replace this whole speaker in 30 minutes with a new speaker than spend $15 for a "repair kit" they sell online. The buttons for the left and right heated seats are on the dash just under the radio controls. They look like a seat with wavy lines underneath. You can also set the radio to show song info on the radio and so on. I just learned that a month ago after 6 years! LOL Try to get a factory manual for the car if you can. there are tips and tricks in the manual that will help maximize the fun and options the car has. I have been building cars for 30 years and I tell all my clients it is easier to "keep it up" than "fix it up." You still have lots of miles left on your car if you take care of it. Especially with city driving you can change your oil every 5000 miles. It makes it easy to remember when to change your oil - 150,000 - 55,000, 60,000 and so on. Another option that may cost a few $$ but it worth it is to replace the air filter with a cotton K&N air filter. www.summitracing.com/parts/knn-33-2145-1/make/toyota/model/avalon/year/2004 For $55 you get a better air filter, a couple more hp, a couple more mpg and you never have to change it! You just rinse it out once a year.
Toyota is planning to stop producing Avalons in 2022. Coincidence? Yes, probably.
LOL. My 2004 is only at 75,000. I got it when my aunt passed away. It's my long haul cross country car because it is comfortable and gets good mpg. Been to Texas, Oregon and lots of long trips. Should last me a long time. At $43,000 in 2004 I tell everyone it is basically a Lexus in a Camry body. Even has the Lexus wheels!
@@SanDiegoHotRod My odometer is at just over 100,000 but it still rides smooth and looks clean. My wife wants to upgrade but I tell her that I'd have to drop a decent amount for a car of the same quality.
@@SanDiegoHotRod I saw 2 Lexus today that didn't look near as nice as mine!
@@celizabethteal1444 I tell people my 2004 Avalon XLS is a Lexus in a Camry body! Which it is. It has all the options and the leather and "wood" dash and steering wheel are in perfect shape. I don't have the rear spoiler but I have gone back and forth whether or not to put one on. It even came with the Lexus aluminum wheels.
😂
Same with my 2003. Guess, Toyota didn't figure our cars would last this long. Mine's got 330K+ miles on it and still going strong!
I got my 2004 Avalon about 6 years ago when my aunt died. She bought it new. It only had 15k miles when I got it. Now after a few trips from San Diego to Canada and San Diego to Texas it has about 65k. on it. It is still in great shape and gets better gas mileage than my 68 Corvette Big Block!
@@SanDiegoHotRod you're surprised it gets better mileage than a corvette big block?
@@johnnnoise LOL
@@SanDiegoHotRod LOL..setting the clock/year to 2011 tonight
@@johnnnoise Another thing that sucks is the O2 senior went out on the car last year. $300 for a new sensor. BUT on the plus side, the car runs richer and gets a few more hp HA!!
Ditto
What headers did you purchase?
The headers were on it when it came to my shop. If I am on a budget I use Summit stainless steel headers. Of course the sky is the limit when it comes to headers. Most important things are the fit and what finish do you want? It is worth the extra $$ to get stainless or ceramic coated headers if you want it to look nice. If you want it to look stock you can watch my video on cast iron manifolds and how to keep them looking new! Good header gaskets are also a must! Good Fel pro gaskets are worth it. Never use the crap paper gaskets that come with the header set.
@@SanDiegoHotRod Price isn't an issue for this customer. We are getting it ready for a NV6500 I believe is the series of manual for that K5 and I'm doing stainless exhaust, x pipe... all the good stuff.
@@jimgiles2783 A few months ago I found some companies that do high heat anodizing or something similar. If they want to "knock it up a notch" you can get the headers coated in some amazing colors, bronze, copper, etc. Take a look around. Clients always like it when you can give them options to match the color scheme of the engine, etc.Keep up the good work!
@@SanDiegoHotRod Man you have no idea... I had to build headers for a scat pack and it was purple and blue with black trim so I had to get my welds purple and blue to match the color scheme. It was fun to say the least. I will see if I can locate the company to get some of that
@@SanDiegoHotRod My shop is Prostreet Exhaust in Foley AL.
One of my favorite movies
My dad has a 72 I want to straight pipe it
Love this movie... free on CZcams now
Such a classic and totally under rated. Every "car guy" or "car gal" should watch this film no matter how old or young they are, especially if you have ever owned a kit car! LOL
The alternator adjusting arm is on the wrong side of the alternator...it should be on the other side of the ear on the alternator...that's why its at such an angle.
Thanks. I did not put it together. I just got it running and wired up the electric seats (see my other video). Also the turnbuckle head (end) of the adjuster does not fit on the back side of the alternator tab. Good notice though!
On the other side of the hill is Sonoma and Napa Valley!
415hp 302 with stock exhaust, stock Heads and this dual plane....????....goodone
Yes. This is a newer block not a 60's block. It has 10:1 compression, roller cam/lifters, full roller rockers, larger valves and machined intake runners. 415hp is nothing if you know how to build an engine.
@@SanDiegoHotRod show me a dyno sheet..and it would be great to know what parts exactly are in there !! to upgrade my 331 Im building right know..
@@Diondo26 You can reach me through my FB page. My buddy with the machine shop built the long block for me. He has done a lot of these 302s. One was in a Bronco for one of his customers and he had a dyno test done after it was installed. I have a dyno sheet from a program I use to plan my engine builds and it was within 5 hp of the actual engine dyno. He also did a 302 for a Bronco that I built for a client. This engine is for a 65 Mustang I am building right now. I just built a color and "numbers matching" Fender Stratocaster guitar to sell with the Mustang. You can see more at facebook.com/corvettesandcustoms
What was I thinking?
Sounds great, great looking vehicle as well
Thank you. Usually iPhones make everything sound like crap! LOL. Check out all my latest work on my FB page facebook.com/corvettesandcustoms
Its Ironic That James Deans First Picture East Of Eden Was Filmed In Salinas And He Was Driving To Compete At The Salinas Airport When He Was Killed The Beginning And The End Salinas Very Strange Indeed Dana Rowe
I have thought about that. You should join us for our annual James Dean's Last Drive memorial cruise from Hollywood to Salinas every Sept. 30. More info at www.jamesdeanslastdrive.com or at facebook.com/jamesdeanslastdrive
The difference is not whether it is electric that determines whether it's a motor or an engine. the technical difference is that an ENGINE runs under it's own power, and a MOTOR requires a source of outside energy to run. An ENGINE can run a MOTOR (example: GENERATORS), but a MOTOR cannot run an ENGINE without some sort of external power source to run the MOTOR in the first place. Simple, right? 😉
I can see both sides of the argument. The human body is like a train engine - diesel/electric. Diesel engine running and electric motor. The human body takes in external fuel which is burned and turned into energy at the same time electrical impulses control our "motor functions." LOL Also an engine needs fuel and motors need external power from electricity or other means like a hydro electric motor. Unless you have a perpetual motion machine..... motor.....engine? The world may never know! Ha.
Are he still alive? When the paramedics are present
Jimmy had multiple fractures to his skull, neck, arms, legs, ankles, etc. He had glass in his face from the headlight of the Ford he hit sideways with his driver's side door. There was nothing anyone could do. I am sure he passed away within a few minutes of the crash. He was covered and put into the ambulance and pronounced dead at the hospital. BTW his cash and other items had been "lifted" somewhere between the crash and the hospital. Very sad. RIP Jimmy.
Great video! Thanks for the tips👍
No problem. Thank you!
never was a James dean fan like many. If they did make a movie of his life Brad Pitt could play this role. They both have the same eyes. Brad is a bit older than 24 now of course
Good video. But the crash happened with a speed of 60 mph and not 150. Regards from germany.
Thanks. Actually Dean just passed a couple in a car in excess of 85 mph just seconds before the crash. Turnupseed also just passed someone who was driving highway speed (around 60mph) just before the crash. Dean also just went from Blackwell's Corner to Cholame (30 miles in 15 minutes = 120 mph) and was heading downhill on a long straight road. Check out my newer video that explains it better. If you get the chance come to California this summer and join us on "James Dean's Last Drive." www.jamesdeanslastdrive.com
Ok, maybe I'm wrong. It's just what I read somewhere else.
i have a good sense of humor i like the scotch brite part . B Ann go away...
amazing for the story about james dean..
550 Spyder Impact speed much lower, according to crash analysis . The lower riding Spyder makes impacts more fatal vrs heavier higher riding Ford.
Of course the Spyder is going to lose in a head on crash (or even opposing sideswipe) but If you know anything about aluminum VS steel you know that you cannot crush the front steel fenders, frame, cross member and rims with an aluminum car that weighs half as much unless it is traveling at incredible speed. Try to smash a large steel coffee can with a small aluminum soda can.
Nice video, but I hope I don't have to go this deep into the tear down and rebuild for my 2005 GMC Sierra 1500 VHO 6.0L. Please take a look at my videos [only five thus far] and I humbly request your guidance.