Video

Love to hear that. All the best to you!

Hmm that’s a good question. I’ll try to look into that and see if I find anything

I believe they are different and incompatible bc the KWA mp7 is not quite 1:1 scale. I believe the umarex is 1:1 so parts for each would not fit in the other. Hope this helps!

@@nickthequick5740 thanks

I'm sorry to hear that! I hope you were able to get it figured out. I originally had a used KWA mp7 from ebay and was able to get help from elite force/ KWA themselves. They actually just ended up sending me a new one as a replacement b/c they weren't able to repair it. Not half bad if I may say so myself. You may want to reach out to them for help if you still haven't got it fixed!

@@nickthequick5740 thanks for the reply. It is completely fucked? It's some very specific parts that's broken. Rather just buy a new one.

200+ IQ plays, I like it 😁

So happy to hear all went smoothly! Have fun, and thank you for the comment 😄

Haha I just saw this after replying to your previous comment. I’m glad you found what you were looking for! No problem 😌👌🏼

@@nickthequick5740 Dude, I hope you realize how many guys n gals you have helped, and continue to help even after 2 years of your post, it was articulate, insightful, and true to the game, thats what ppl like to see, raw true video with no cutting or editing, so we can see and learn. Thanks again Nick!!!

Excuse me.......4 years!!!

@@rmoreno6014 wow your comment made me smile! Thank you for saying that. I’m so glad to hear it helped you and has helped a bunch of other people too 😁

I’ve never owned the power up suppressor, but it is quite similar to this one I have here I believe. And I think you’re correct when you say it comes with a new flash hider which is compatible and necessary for the suppressor. I had someone ask me a similar question before and I tried attaching my suppressor in this video with the stock orange one and they did NOT pair together. For whatever reason the stock orange flash hider must have some slight differences to the aftermarket ones which don’t allow you to mount onto it

To answer your other questions, It’s quite common for airsoft suppressors to come with the necessary flash hider to mount to, as they more often than not don’t fit onto the orange one. If you want a specific suppressor (because you like it’s style or color) that is not mp7 specific, you may have to buy an adapter. The mp7’s usually come with a 12mm threading and many airsoft suppressors (not specific for the mp7) have 14mm threads. You simply have to get a 12 to 14 mm adapter and you’ll be good to go. Let me know if this clarifies things for you! And ask anything else you need

Sorry for the late reply! My initial thought is that the KWA one here is slightly different because it’s a gas blow back airsoft gun, while the EF/umarex mp7 is an AEG version. I’m not entirely sure, but that’s my understanding at this moment

Thanks for the comment, glad it helped you!

I believe I actually use one just like you mentioned. A nunchuck style battery

store.kwausa.com/product/hex-keys-89mm-1-5mm-or-2-5mm/ Here you are 👍🏼 It was also in the video description 🤪

What a GOATed name

I’m jk your video is great lol, I really appreciate the tutorial. But get a hammer 😂

Hahaha I think I was away at college during this video and so i was using whatever was lying around 😂

Hmmm that’s interesting. Part of that will be due to the cqb bolt, but still that seems a bit low. Maybe your mags are leaky? Maybe the o-rings are dry/worn and they’re letting out pressure..? That would be where I might look to begin

I’m glad to hear I could be of service. I hope this fixed your issues!

Thanks for that advice! Just been using my iPhones mic so maybe I’ll look to get a cheap lapel mic so that audio is much better. Take care!

Whatever works and whatever you’re comfortable doing :) for me this was a new gun and i wanted to take care not to mess anything up by accident.

I’m sorry for such a late reply! There’s a tab that's connected to the mag follower, and when the follower is all the way up (empty) it engages the bolt lock. Your tab may be broken or worn down potentially. Do you have this probably with just this mag or all mags?

That’s definitely the hardest part man. If you can do that part you can do anything 😤😂

Glad to hear! 😄

Hahaha it’s a bit tricky for sure. If it’s similar to the one I have in this video, I show you how to put it on towards the end. If it’s a different one, there may be another method you have to use. What kind of mock suppressor do you have?

@@nickthequick5740 Oh no I meant you showed me how-- I got an angel custom one and the mechanism is the exact same as the one you showed in the video. Had no idea you needed to push it to the side to slip it on until I saw you do it lol

MoonlightBridge ohhh 🤣 yeah I definitely misread your comment. Thank you for clarifying anyway. I’m glad I was able to help you out :D

@@nickthequick5740 heya help I’m having a hard time screwing the screw back in (the one with the spring) it keeps flying out idk if I’m doing it wrong or not

Just a standard picatinny rail I believe. Very common in a lot of guns so most attachments will fit it

I’ve been trying to look for a link to post here but everywhere I’m looking is sold out! :( I’m honestly surprised

It was honestly a generic holo I found on eBay for no joke $25, but it’s been great surprisingly. Sometimes you get lucky and the cheap stuff is actually decent

Never mind I’m an idiot that ones VFC but now I don’t know which one I like the VFC navy but the KWA is co2 but I heard that it’s not 1:1 scale and am not sure about the folding grip are either of these problems

Ryan Wellman I have the KWA one and from my experience/knowledge it is indeed a little smaller than 1:1 (I used to remember the exact reason why, but now Im forgetting). I believe the VFC navy has remedied that and is indeed 1:1. Also, yes from what I remember when I first got my mp7 it was shooting kinda hot (close to or even above 400fps - I didn’t have a chronograph so never was 100% but when you shot it and compared it to a field AEG it was obvious). As of this moment, I’m not exactly familiar with an easier or different method to reduce its FPS other than the CQB bolt or using way heavier BB’s (which is a good idea in GBBs anyway).

As for picking between the two, that’s difficult! Both use green gas, (I’m not sure if you meant to say the KWA was CO2 powered) are good smg GBBs, and look awesome. I’m not sure you can go wrong with either. I wish I had the new Navy mp7 to compare but from what I can tell it’s very nice but definitely a bit more expensive. I do like that it has a rail on the bottom, but I’ve never had a problem with the KWA’s integrated foregrip. Also the KWA being not 1:1 has never bothered me because the way I have it now with a suppressor it’s as long as my cqb M4! So I’m not sure I’d want it to be even larger for close engagements. I hope this can help you out, but as I said, either will be great guns! It’s a win win situation

@@nickthequick5740 i see. As for co2 on evike.com it is sold with co2 mags and they make them as well

Karlo Lapuz hmm... that’s odd. My only thought is, and I believe I briefly touched on it in the video, is that while the trigger seems to be positioned correctly, it’s actually not. My best suggestion is to remove it once again and work on repositioning it. Maybe that will solve it...? Does this issue only happen on semi? Or on automatic as well?

@@nickthequick5740 nah on full auto the trigger works perfectly fine. the problem only happens on semi when the trigger is pulled and there is no magazine in the gun. it’s especially prevalent when the trigger is pulled slow.

Hello, no you do not need to buy a new/different barrel in order to add a mock suppressor :D you simply need to purchase a suppressor that has 14mm positive (+) threads (you may see it labeled as Clockwise (CW) threads as well from websites). That is what kind of threads are on this particular airsoft gun. Hope that helps, let me know if you have any more questions!

@@nickthequick5740 thank you so much for replying. :D that was helpful

This is absolutely the hardest/most obnoxious step 😅 I’m sorry it gave you so much trouble. I hope you were able to figure it out!

@@nickthequick5740 I never got it. Tried for like 18 hours over the course of 4 days. Just gonna send it to the oem to fix it. Idk why i cant get it.

Sorry for the late reply: I absolutely love this gun - the way it looks, the way it sounds, it’s performance out of the box, it’s realism features, but it nonetheless has its downsides: 1. Price of gun and magazines and pouches etc: this is certainly an important aspect, but as a gas gun you have to expect those kinds of prices. 2. It can shoot too hot for indoor places out of the box, but may not be your number one go to for outdoor play depending on the weather and range of fights (green gas is finicky in cold weather; this is not ideal for longer engagement distances, rather mostly for short to medium ranges). 3. Bc of number 2, it may be necessary to invest in a cqb bolt or other upgrades which you’ll then have to install which can get a bit tricky. And perhaps some other things that I’m not thinking of at the moment. So if all of that sounds worth it to you then go for it! The MP7 is my favorite smg out there, so to me it’s been a dream to own a replica despite all the other stuff, but there have been some headaches with it. But I can’t deny that anytime I bring it out to a game, whether i do good or not, it’s just a whole lot of fun. As for the crack of death, so far so good for me, but I try to take care of my mp7 as much as I can, so maybe that helps me

Awesome man I hope you love it!

You’re welcome! :D it’s a great airsoft gun so I pray you can be successful 😄 good luck and post any questions if you have any

@@nickthequick5740 i have to change the hopup bucking , as soon as i can get my hand on this 0.89 allen key I'll do it , but i mostly have to find a stock , because it was broken ,i wanted an angry gun one ,but it's discontinud , i also asked the KWA store online for the original parts but they dont reply , so if you ever know where i can find a stock i would really appreciate ( i need the 2 metal sticks and the little piece that holds them togheter , i already have the Wii Tech buttpad)

Interesting, I’ve never searched for a new stock for this gun but I’ll try to research some and get back to you. Changing the bucking is definitely a must, so good move there 👌🏼

nvm, after some sleuthing i found it was positive. Thx for the video though! it'll definitely come in handy

Yup was gonna tell you it’s 12mm + but nice job! Glad the video was useful to you

Evike.com You’ll want to look up suppressors that fit the threads for this mp7 though, which are 12mm positive 👍🏼