- 4
- 51 617
c208 Driver
Registrace 9. 11. 2013
C208DRIVER
Guardian Angel Anti-Collision Mavic 3 Classic
Guardian Angel tactical light (2022 Elite Series) mounted on the Mavic 3 Classic and used as an anti collision 360° strobe.
Up to 8hrs on a single charge. Charged using a USB-C cable.
The light comes with an integrated magnet which was removed so as to not interfere with Mavic’s compass, camera and other systems that can potentially be sensitive to strong magnetic forces.
Lights can be seen from all angles including from straight above. GA states that LEDs can be seen up to 5 miles away.
Can be mounted using 3M double sided tape or Velcro. The unit is light and negligibly affects performance.
The lights also DO NOT affect video recording. You cannot see them when you’re filming unless you’re close to something that can reflect the light back but during night shots, you would not be anywhere close to anything anyway.
Up to 8hrs on a single charge. Charged using a USB-C cable.
The light comes with an integrated magnet which was removed so as to not interfere with Mavic’s compass, camera and other systems that can potentially be sensitive to strong magnetic forces.
Lights can be seen from all angles including from straight above. GA states that LEDs can be seen up to 5 miles away.
Can be mounted using 3M double sided tape or Velcro. The unit is light and negligibly affects performance.
The lights also DO NOT affect video recording. You cannot see them when you’re filming unless you’re close to something that can reflect the light back but during night shots, you would not be anywhere close to anything anyway.
zhlédnutí: 2 056
Video
2017 Ford F150 Super Cab Rear Door Panel Removal
zhlédnutí 49KPřed 7 lety
This video shows how to remove the interior door panel of the 2017 Ford F150 Super Cab
How did you mount it
Thank you
bad form.
thanks for the video worked well for me
Urgh
THANK YOU This video really helped!
can the powerful magnets affect the drone's GPS signal
This is not a super cab
Thank you
Lets see how it flies with your light placement.
Great video. Really digging the bird shit on the bed. LOL!
I had a stuck open back window. After eliminating the switches being bad, I knew I had to get into the door. Following your video made it pretty easy. I couldn't have done it without the video, so Thanks!! btw... a few taps on the window motor/regulator and it works.
Great video thank you so much saved me alot of time replacing my upper door latch !
Thank you, great video for F150 SuperCab rear door.
Perfect !!! Thank you.
Where can I buy one for my mavic 3 love it
It’s called the guardian angel. You can Google it
I use the Guardian Angel Micro which is a 1/3 in weight and just as bright.
I have one too but the larger one works better for me
looks good but weighs 85 grams
With that amount of light coming out of the strobe, wud it have any effect on your photos or video captures?
No effect on the video at all
works on a 2020 XLT SCAB, only one i could find. Thanks much
I would be dumb if i put this big heavy thing on top of my Mavic 3 Cine. Here in Germany you have less restriction with the new C1 Label. But if i put this on top it would be weight more than 900 gramms so the drone cant fly with C1 Rules anymore!
It’s not heavy. And the increase in visibility would more than make up for it. Here in the US we don’t worry so much about the overblown red tape that all European countries seem to enjoy. Europe always has to fuck it all up with their incessant rules about this or that. The point was to make the drone more visible at night for both the operator and other air traffic. Who gives a fuck about weight? You really think their gonna come up to you with a scale and weigh the drone? LOL Half of all the law enforcement people know NOTHING of drone laws. And big deal if u can’t fly C1. Go to the next category up then and fly under the more restrictive rules if you’re that hard up on staying legal. Not a big deal.
@@c208driver6 the problem is...if i crash my drone fly away or something which ends with massiv destroyments and payments my insurance would nothing pay. Than i have to pay aaaall the money! It is not worth it beleave me
Thanks for your help!
I know this video might be a bit old, but does anybody know the size of the actual hole for the speaker? I know the speaker size is 6.5”. I just want to know how big the hole was. I’m wanting to buy a pair of speakers and I don’t know if the basket of the speaker is too big for the hole.
Removing seatbelt isnt necessary. Thanks for the walkthrough though!
2nd time I have use this video to remove my door panel. Thanks again 👍🏻
Thank you for posting this! I have been a little worried about how to pull my door panel off my 2020 SCAB Raptor. A+++
Can you unplug the switch from the back once the panel is off?
Hi for the front I had to buy adapter for the front speaker because it's aftermarket from the rear you need adapter also for aftermarket speakers? Thank you
Yes you do
Nice to find a video that actually shows the back door
And the Supercab "suicide" door, at that! Big thanks, because most of the Ford f150 backdoor panel removal videos are of the Extended cab rear doors / normal backwards opening doors. And yes, many of us are trying to replace & upgrade from our blown factory speakers. ;-D
Your next video should be seeing how long you can run the truck in your garage.
You don’t know what you’re doing. Those aren’t the right tools. And that is not the way you the proper way to hold a drill. Get a clue.
Thanks! It’s nice to have people comment. I hope you enjoy my channel!! Oh and that’s not a drill. It’s an impact tool! The more you know!!
Yeah man. Keep uploading these gems of vast knowledge. Seems like it sure is taking a long time though….🙄🔫
Very nice video 👍
Excellent! Helped me to install a new power window on that door. Thank you.
Thank you so much for taking the time to make this video! I'm hoping that it will save me some from some more gray hairs when I attempt it on my 2020.
With ya Jermaine, already have enough gray hairs. Hopefully new speakers installed tomorrow!
@@bratman87 sorry! I thought I was replying to a different video that I also commented on. Old and gray, I tell ya 😕
Thank you sir!
Thank you very much. The lower cable had popped off and I couldn't open the door. A real pain in the butt!! This was very helpful, and I broke nothing!!! Lol Cheers
Thanks for this video! I’m going to be installing speakers and sound damping material soon!
Dude THANK YOU FOR MAKING THIS VIDEO!!!!!!!!
Thanks
This is a very good video. I couldn't of done the job without it. Thanks
Good work, helpful!
Ty so much there isn’t any vids on this it’s so helpful
My cable came unhooked on my '15 supercab lariat. Couldn't get the door open. Used your video to get the handle off and reattach it. Thanks
We’re you able to pop the handle panel out without disassembling the entire door?
Thank you so much for this... as others stated only video I found for the supercab and crutchfield instructions are good, but just pictures is difficult. Thank you also for supporting the 2nd amendment!
Thank you so much and now I get to enjoy trying to do all of that while the door is jammed shut 😂
Finally found what I needed!! Thank you for taking the time to put this together.
sorry to be off topic but does anybody know of a method to log back into an instagram account..? I stupidly forgot my password. I would appreciate any assistance you can give me.
@Aaron Valentino instablaster :)
Thanks so much. you are right, not another good video that i could find for the supercab.
Jason Allen You are correct. Was wondering on removal since all the videos ive seen has been for crew doors.
So what if you can’t open the door?
That is the same issue I am having right now! I have the new cable ends that need to be replaced. I own a 2010 FX4. I just checked the lower part of the door panel and their is one screw located just forward of the back seat bracket. It will be tight however, I believe it can be removed with the door closed.
Do you know what that white stuff is in bird sh*t? It's bird sh*t too. Great video!!
You don’t need to remove the seat belt. Pop the panel and slide the panel up about an inch...that allows access to the 7mm bolt, then on the handle pop that panel and pull the 2 10mms...then you just pull the 2 on the bottom and two under the handles.