![ENRIQUE PALACIOS](/img/default-banner.jpg)
- 16
- 98 565
ENRIQUE PALACIOS
Registrace 19. 07. 2012
Video
Memphis Bikes on Beale
zhlédnutí 90Před 3 měsíci
First bike night of 2024. Harley Ultra and Can Am Ryker.
2006 Harley Davidson VRSCD Night Rod walkaround
zhlédnutí 81Před rokem
2006 Harley Davidson VRSCD Night Rod walkaround
VRod Engine Coolant Temperature (ECT) Sensor Replacement
zhlédnutí 3KPřed 4 lety
Replacement of VRod engine coolant temperature sensor on my 2006 Night Rod VRSCD. I did not drain coolant, so I leaked a fair bit onto the drive way! This does not involve removing the water pump, and requires a 19mm deep socket (sparkplug socket works fine) and extension.
Removing foot peg brackets from Buell Blast
zhlédnutí 770Před 4 lety
Removing the foot peg brackets from a Buell Blast involves jacking up the bike and taking out the rear shock and battery. Also you must have a socket with an articulated end and extension. It's a tight space so be patient. It took me about an hour to complete this task.
VRod oil leak rear cylinder crank case breather hose
zhlédnutí 6KPřed 4 lety
I show how to fix rear cylinder oil leak from crank case breather hose. Easy fix and only a $15 part. Takes about 10 minutes to complete.
Vmod stock exhaust inner baffle removed 2006 Night Rod
zhlédnutí 1,4KPřed 5 lety
Modified stock exhaust vmod inner baffle removed
Vmod 2006 Night Rod VRod stock exhaust baffle removal
zhlédnutí 7KPřed 5 lety
Vmod 2006 Night Rod VRod stock exhaust baffle removal
this video is so cringe
Jealous 😂
Whats the minimum age?
aren't they supposed to unbox one at a time?
Why do women ALWAYS have trouble aiming with AR. At 10:05 my wife also had the same issue and she is right handed. The only way she’s able to properly grab an AR is if she’s holding it with her left arm. I can’t comprehend it lol women I guess ☕️
I guarantee you this sort of family fun never happens in Australia. Nice to see a lady who after one shot explains she doesn't like it.
Too much stuff, too many weapons lying in the desk.... you should try one at a time, just to get things more controllable.... beware of the man with just one gun, fear nothing from the man with too many...
All you guys make negative comments screw off bro stop hating it’s like it’s a shooting range and I think that’s bull with glass. I’m not sure cause I’m so I don’t really know.
Doesn’t matter if it’s bulletproof plexiglass glass, I can tell you don’t associate yourself with guns much because everyone that has at least some knowledge on guns knows that you NEVER point a gun at or in the direction of something or someone that you don’t want to kill
So surreal, in Japan we can't even own guns
…and you have no mass shootings!
@@jjv65uk.....And they don't have the right to protect themselves!
اني
don't we all love Memphis i have been to this range w guns too so sad they did not let me shoot my arp 😥😥
It appears it’s their first trip to the range but everyone has to crawl before they can walk.
Average american
Good
but why do you need to shoot 30 rounds
Practice makes perfect
Cuz we have the right to, plus no point loading 10 rounds in a 30 round mag if you can just load the whole thing
I shoot 300 per range trip
super
I was gonna say, pop up the rear sight on the AR bro. Was driving me insane! LOL
dont need too
Most people in here are posting negative comments so heres a positive one. This video made me fall asleep (without headphones) due to me liking shooting weapons and it was relaxing to me! 😊
came here for the shooting range video, stayed for the vibes. GOALS
This video is so relaxing
relaxing?? it stressed me out
@@smem7963 fr
Where is this.?
Top Gun Memphis Tn
Mr know it all don’t practice safe firearms safety these are the people you don’t learned from or let them tech you ether
What r u trying to say😂
@@Winnubooiiiliterally just retard babble
I enjoyed this video soo much! 🤗 Please make more of these videos! I can't wait 🤙😎
Yea same
😊 that you in 🇫🇷 France country's
a lot of red flags in this video
like what?
@@demonicflame66 I mean for starters, they have way too many things on the benches at once. You shouldn’t clutter your space with over 2 different guns, all sorts of ammo and magazines at once. Keep it limited and clean in case something goes wrong. Some people act like going to the range is a party event and they bring everything they have. Even if you do, only take one thing out at a time. Benches were so cluttered they were loading magazines at the desk. You should be staying and doing everything at your lane. There were Several instances where barrels were pointed towards the in between barriers which is a big no. They should be pointed down range at all times. A lot of new people have a bad habit of pointing the guns to the side when taking off safety, inserting a magazine or even racking the slide.
@@GlobalTossPot ah. This is why I shoot in the woods. Public ranges suck ass. 😂
The flag on the walls are Netherlands ones
You would never make it on a Canadian gun range
Compliment for an American
cringe
Did you enjoy having no friend as a kid
What’s so cringe
Jealous?
That place is unsafe as all get out. Daughter just got flagged wow! Just fyi, load your mags before you go to the range. Be safe please!
I mean even so its not like he has many you gotta reload at some point
You can have a loaded weapon as you go in no mags no chambered weapons
What's the time stamp for that?
Dude just pointed that 22 at your daughter through the barrier. SMH. Lots an unsafe stuff happening here. Be careful man. Spend more time on safety. Good to get your kid into it but make sure she’s safe at all times from the people around you.
Can I have the timestamp
@@Militarybrat1511:22
@@TheRealbenjibits???? She doesn't get flagged
@@CR.ONIC871 Do you have eyes?
I used three pieces of angle iron (L pieces) to make a betwixt piece. Use two to create a U, bolting together with two bolts. Use the third, within the U, to help hold them apart, facing forward, using one of the bolts... Basically, one side of the U goes onto the bike, with new bolts, into two of the frame holes (and ignore the third). The other side of the U gets the pegs' bracket bolted to it, using two of the bracket's built-on bolts... It makes the removable of the bracket easier, since not unbolting from the frame... Some drilling and angle grinder work, some bolts and nuts, a little paint... You can build the pieces using far less time than you'd need to remove it again.
Hi, I watched your video because I'm looking for an answer to a similar situation. I just bought a 2003 V Rod, I saw that the coolant tank was empty, I already sent to buy the liquid, and here comes the question, when you turn on your bike, the fans that are in the radiator, are turned on at the time or how long it takes, I imagine that this is the temperature sensor, to activate them, right? And if so, I did not notice where it should be located and how you worked to remove it and place it back.
What is this tool u speak of ?
Bro I have an easy fix for you. Found a tool at Harbor Freight and you don’t need to take the shock out. This thing changes things for taking these off. So much easier!
what is that tool? i need it to fix my buell
Appreciate you man
What fid you use to read the codes and clear them too? I know cars have a OBD2 Port to hook up too, not sure on bikes.
To read the codes, 1- Ignition off 2- push odometer reset button in & hold. Make sure run switch is on. 3- turn ignition to run and release button (you will see P, S &C displayed) 4- each letter represents an area of diagnostics... the one that is flashing is the one you are going to check. To move from one letter to the next, you push the button one time. (from P to S to C and back to P, etc.)
Don't do it, don't do it, don't do it. WTF and now it runs like a moped.
No, it sounds great! Depends on what you're looking for I guess. If you want loud on a budget, this is the way to go.😎🏍👍
@@enriquepalacios8309 Harley spent $300 million developing that bike with Porsche. After countless hours and huge money tuning that bike perfectly to those mufflers on a dyno and you just ruined it with a drill. If you want a different sound, buy a different bike. If you want more performance use the resources that spend the millions so you don't have too. My vrod puts 160HP at the rear with the stage 3 screaming eagle. A perfect ratio of fuel to air. You my friend have less back pressure, causing your engine's ecu to run rich leaving unburnt fuel deposits. This will cause piston, cylinder and valve damage. Get that engine up to temp at high rpms and you ecumenical will flip running to lean and burnt a hole right in those aluminum pistons. Budget? I think not.
@@mahealanihawaii9830 nope! Runs great when you tune it. Bikes have to meet stringent EPA standards for emissions and decibel limitations. That takes priority over power. Once you remove the baffles and get more airflow, you tune for power and get great results. Which is why the aftermarket business is booming for motorsports.😎🏍👍
@@enriquepalacios8309 Good luck
What saddlebag set up do you have? Also with pipes can you use 3in hole saw to remove inner baffle? Do you need to map the fuel mixture?
It's the OEM Harley Sport saddlebags. A holesaw works to remove baffles. It helps to "perforate" with a dril before cutting with the saw since the metal is pretty thick. I've since changed to a V&H comp 2 into 1, and have the stock exhaust for sale if you want it.
My '09 Night Rod Special has the same issue. Thanks for posting this video. I am going to try order the part tonight.
THANK YOU FOR EXISTING AND SHARING THAT, OMG THAT'S THE ISSUE I WAS TRYING TO FIGURE OUT AND DAMM FOUND YOUR VIDEO! TOOK ME A LOT TO FIGURE IT OUT AND SAME AS YOU THOUGHT COULD BE A BLOW CASKET. THANKS AGAIN HARLEY BROTHER, BTW, DO YOU STILL HAVE IT?
Dude thank you so much...my muscle doing same shit
I just had a company install leds on my 11 NRS and they told me you know your rear rocker box gasket is leaking... thank you for this video. I knew my breather hose was split inside of the airbox but I didn't think it would look like a gasket leak phwew 👍
Haha, I was wondering where all that oil was coming from! Didn't think it'd be the hose since it wasn't just spewing oil everywhere, but it was definitely enough to be concerning! Thanks for the video.
Great vid man! Saved me some heartache.. just the breather hose. 💪🏼👍🏼💯
I have the same problem on my 2007 VRSCAW. I used your part number to order a new one!
Can canister be opened and cleaned?
can't you connect a hose throw it to ground? cover hole with black duct tape?
Hey man did you have to disconnect the alarm or does it not get set off because it's not messing with the electrics?
@@BikeLifeMike93 try using a little soap (or spit on it!)
Hi! Im thinking make this mod on my nightrod exhaust. How poud it will be? (In a scale 1stock-10 drag pipe) thanks!
I would put it on a solid 10--sets off car alarms on deceleration and sounds like a drag pipe. I wear earplugs while riding.
I guess you can pull them out with the muffler still mounted, no need to take them off?