Video

Gurgle😊

Absolutely hate the pressure hose it comes with but to be fair most pressure washers come with cheap pressure hoses. One of the first things anyone should do is to buy a higher quality flexible pressure hose.

who posts a video of a new exhaust and decides not to show how it sounds after?

I am 5,5 and want a 125 80 centimeters in seathigt Can i get a 450?

i started on a 23 KX 250 at age 23 last year and im now more than comfortable on it. cracked my shoulder on my first ride but we are still going strong now thats its healed. riding every weekend and learning fast

I’m 4,11 and 12 years old but I’m looking for a bike medium sized but not too tall. Looking for a 110cc. Any suggestions? I also don’t want it being too expensive

Im 5 ft 4 12 years old turning 13 and im 176 pounds

I am 18 id say almost 300 pounds and 6’3 what would be the best bike for me

Great video. I’m using this exact model today on a composite deck. I’ll use closer to 50% power I think after I hand pump some SH on it first. Very user friendly video, please do more of these for power washing different surfaces!

Opening the throttle shouldnt affect anything, am i missing something?

Im 15 and 5.10 and i have driven one dt50 and a honda xr 125 and im wondering should i buy a two stroke 125 ?

I’m 16 5’9 185-190lbs I’ve had a ssr 125 with clutch 2years ago, would a kx 250 or crf250r would be good for me ?

Thank you for the video. I have a 2023 KX250 & I am still trying to get used to it. It's been about 38 years since I have ridden a dirt bike and that was a 1980 Honda CR80. So far I am having difficulty getting used to the height, tip-overs, and emergency stops as well as getting on and off smoothly. Right now, I am also trying to get used to throttle control the clutch, and the power of the bike. Today, I had continuous kills when I tried to start off. I over-throttled once and learned the hard way about that power. Thank you for the information you have provided here. It is very helpful.

What if it's the clutch arm itself that's super loose

I'm having a problem with the 'snap'. I broke the one arm off the clutch pressure plate (didn't have a clutch holding tool, and the impact driver wasn't doing it so braced the plate by the 4 'arms' - don't do that). Anyway, I got a new clutch pressure plate but it isn't 'snapping' like the old one did, and as in the video... It squished completely flat as if it has snapped but just falls apart when turned over... I tried putting the whole assembly back in but it sort of separates... Not sure if this is OK or how important the 'snap' is.. Any help would be greatly appreciated

By the way love your videos your videos are the only thing that made me wanna buy dirt Mike so please you know I'm waiting for you

Hi everyone

Great tips fantastic video, thanks for the info….

is it supposed to be smoking that much?

2024 KLX 230R do you know what’s top speed ?

I’m 15 5’10 I’ve had a 110 but do you think I’ll be ok on a 2021 Yz 125 I’ve never ridden a 2 stroke before

I like the green graphics on the black plastics looks sweet! And the little red I like a lot too! Nice job

I don't like that they are made in China.

*CURSE YOU AQUA-SCUUUUUUM!!!!*

a plastic fender is most likely molded so there would be no surface finish, i dont think theres a way to really bring that back unless its remade. you can polish but your essentially making microscratches and trying to blend them. Since there is no scratches to begin with and you will always see them new will always look shiny and buffed will be dull. No clear coat or paint to work with like on auto paint ps. why did it have to be the new 2017 plastics hurt a bit to watch u ruin $300 and as a car detailer ill be trying what we use at work might be a good idea to sell it to mx folks if its better than axetone cuz i use that at work as well

I curently have a klx140rl i havent had it that long but i am already starting to want somthing faster i dont know if im ready yet though but i really really really want a yz125 or 150 but i dont know if i should keep mine for longer or get a yz

Great tutorial man. I'm a ripper. On everything I ride. And I need something I can eventually rip on and I've kind of decided on a yz 125 2 stroke. I've ridden cruser bikes and street bikes but never dirt bikes. I've always had a fourwheeler but I've been obsessed with dirt bikes recently. It's nice to see what the limits on this bike are on both ends. Keep up the good work brother.

Hey i got a question, i want to buy a dirt bike and i am 14 yrs old an 5.6 feet what would be a good bike?

thanks bro

HEY WHO HERE IS WATCHING THIS FOR SCIENCE CLASS

how do you check it on older yz125? i dont have the bolt

I’m 15 about 5’10 5’11 I’m not that experienced do you think I’ll be good on a Kx 112 or a Yz 85 or even an Kx 100? I’ve never rode a 2 stroke I’m coming off a 110 since 2019 and my main concern is the power band and me getting hurt do u think I’ll be ok?

How do you check the oil after riding a week or so?

Nice video bro. I subscribed. 👌

Im 13 and 5,9 i could trade my ttr 125 for a kx 250 but will it be to big or to much power for me?

Is it good going from a pitbike to a 250cc Motocross bike I have approximately 2 years of experience (i didnt count the 50cc since it wasnt a manual bike)

Im 13 and my first bike is an 450 ktm exc 2006 fun bike

Im 14 5'5, all full size bikes are the same size, I dont want to get a smaller bike, Im a beginner with experience on a crf 150 so should I get a 250 with full size, I will shorten it some how

The dealer said the suspension was identical but adjusted differently is that true can i just adjust my setting to match the 250x?

So if you have a 600 litre ( water volume ) tank and you need × 5 times the cycle rate ( using Herbie overflow ) ..what is the thickness required in the primary ( Siphoning ) and emergency pvc pipes, so that the Siphon remains as quite as possible without water crashing. Also what type of overflow box ( same as yours ) should i use. I am doing freshwater fish tank with sump. If it's a 5ft tank ..how big ( dimension ) should the sump be?

Get a kx250x.

Do you know why my bike still has 60 psi its a 2000 yz125 and we just did a full top end rebuild the compression tester isnt broken or anything and we did everything right new gaskets and everything so would you know why it still has 60 and do you need to get it broken in for the compression to go up or what?

Hot foot moto makes reproduction reed block manifolds for it. My friend had an 87 had a gas on it. The clutch parts are the same as the kx60. Plates basket etc. Btw it's a 84 the 85 had silver frame color.

I still have my 96 cr250 from highschool. Original low hour throws me off every gear doing jumps so I do gnc.

I been there with three crying children lol

Check for spark

Hard to find these in nice condition like that .

im 12 at 5'4 140lbs still growing what bike is good my inseam is bit taller than most people at 5'4

Awesome!

Just bought the 2016 model today so this helps my confidence a bit thanks for the tips