Orlandoo Hunter OH35p01 Oh35A01 - custom builds vs stock vehicles test
Vložit
- čas přidán 28. 08. 2024
- 1/35 Unimog
- custom aluminium chassis
- metal upgrade axles
- metal t-case with metal gears
- sound module
- Revell 1/35 LKW 2t. tmil gl (Unimog) Body
1/32 Landcruiser
- custom carbon chassis
- aluminium axle shells with metal diffs
- metal t-case with metal gears
- Tamiya 1/32 mini4wd Landcruiser Body
Orlandoo OH35a01 Jeep
- stock driveline
Orlandoo OH35p01 F150
- stock driveline
Join the Orlandoo Group on FB:
/ 946061995511068
Buy Orlandoo Hunter Models:
OH32A02 Pajero Kit:
goo.gl/RU5JQv
OH35A01 Jeep Kit:
goo.gl/ShBe49
OH35P01 F150 Kit:
goo.gl/BHRa9r
That red cabrio car is badass!
so tiny but so much roarrrrrr...love the Merc truck with the canopy and all!
Long wheelbase for the win
The ford main color is sooooooo similar to tamiya ts52 I did on my A3 :D awesome color
That's awesome you did a great job
thanks buddy :)
Nice rc adventure 👍👍
Fantastic video well done I really enjoyed it I've liked and subbed you my friend well done again, 😊😁😊
nice unimog... revell 1/35
Great video comparison Don! Could you list the motor RPMs that are in each vehicle here? I'm having a hard time finding visual comparisons of the crawl speeds. Thanks!
First off awesome little rigs you got there! But little Unfare comparison beeing ever 1 has a different wheel base and types of bodys 😂 of course the longer wheel base 1s and hevier rigs do a little better on this test!
Lets see a test on real off road terrains 😉
Looks like the jeep was faster then the rest to?
The green raptor is a good example of how to slow can be bad you dont have the wheel speed to hop over the top of the ramps!
Cheers! :) Hmmm i think shorter wheelbase isnt a disadvantage... but to be fair, the custom rollcage on the jeep does add a lot of weight up high, thats why it rolled over all the time, really bad cog. In a real offroad situation the unimog and landcruiser would still perform better than the other two because they have a better cog due to the metal axles, custom chassis and overall optimization (unimog has a divorced setup with motor in front, under cab) while the f150 and jeep drivelines are both pure stock. The unimog does really good outside for its scale imo. The jeep has the fastest motor, 300rpm. the f150 has a 200rpm, the unimog a 150rpm and the landcruiser a 120rpm ;)
DonGargon i see true didnt notice the metal axles lol true rollcage dont help the jeep but looks sick af 😂 i run a long wheel base on my scx10 so it can climb steeper inclines myself 😊
even 1.1 wranglers flip backwards easy lol
How do these handle mud and muck? My 1/24th ecx barrage dont like mud 😂
👍
Hola, buen video, ¿El segundo coche es Orlandoo 1/35 con Tamiya 1/32 Land Cruiser?
I have unimog kit but I haven't RC evening
Awesome video c:
Quick question, is the Mercedes a kit or custom? If it a kit what’s the name of it c:
Great Video. What body is the truck at the beginning of the video? The orange one.
Thanks. Its a Revell 1/35 LKW 2t. tmil gl (Unimog) Military Kit
@@dongargon did you use it with the Jeep or Ford chassis?
Just a question about the Unimog. What did you make the chassis from. Was looking to build a similar model. I was going to use the adjustable chassis if it would work. But for $30 bucks I feel I could probably make aluminum rails or braze a brass ladder frame for less that might work better. Thanks and truly love the look of your Mog.
Hai there....for the unimog what model orlando hunter you are using for the chasis?
Great comparison and love the customs! Question, the red axle shells on the on the Landcruiser, will they work with the stock OH35a01 drive line components. I see them advertised at several sites, but they don't indicate which Orlandoo kit they are comptable with? I don't think the aluminum OH35P01axles you used ont the Unimog are compatible with Oh35a01. I would really like to get aluminum axles for the Jeep.
Thanks rowntrp.
The red shells are similar to stock oh35p01axles. oh35p01 axle has 3mm output shaft so youll need 2to3 shafts to make it work with the oh35a01 t-case.
well i have installed the red axle shells on the new adjustable upgrade chassis rails, they are essentially the same rails like oh35a01 and the rear axle hit the rails. Its not much, but without modification travel is slightly limited. Ive seeen people using the MA-550 upgrade axles (2mm output) on the jeep chassis and they seem to work good. they are just a tad wider. hope it helps...
Thanks DonGargon,
I've been searching the Internet and forums and haven't found mods using the MA-550 axles on the jeep yet, will keep looking. Hopefully as time goes by, someone will come up with a direct replacement. The adjustable frame you mention is that the Xtra Speed orange frame I see at RC Mart? Anyhow, thanks for your help still waiting for electronics to arrive so I can finish my first micro 4x4.
Yes you can get that at rcMart. As far i know, theres no mod needed for the MA-550 Axles. But i can try tonite and let you know. Only thing needed maybe are different lenght links.
The adjustable frame is for diffrent bodies. It doesnt work for the jeep without modding.
Thanks.
Hi, just wondering if you tried the MA2-550 axles on the jeep?
yes now i have to make a new vid
Where did you get the light bar on the jeep?
I have made that myself. 17 x 0805 smd's in parallel. powered from the orlandoo esc.
🔝🔝👍😉
How long do the standard batteries last with all lights on?
Where did u get the comercial truck body?
Your Jeeps weight needs to be better distributed.
Why do you keep stopping all the time?
Which motor would you recommend?
Lightbar pcb's are now available on ebay:
www.ebay.com/itm/272585068279?ssPageName=STRK%3AMESELX%3AIT&_trksid=p3984.m1558.l2649
Nice!!! where did you get the cruiser body?
Got that a few years back but they are still available. Its a Tamiya 1/32 mini4wd LC70 Dakar kit.
The cat appears at 8:01...
Want to sell it