In this video i will show way make a 2S 7,4v - 3S 11,1v - 4S 14,8v Battery from old battery get in broken laptop instead. Thanks for watching, Have a great day !
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
GREAT VIDEO! YESTERDAY I FINISHED A 3S LI ION BATTERY PACK. BUT I WASN T SURE I DID WELL. AFTER A NIGHT OF CHARGING WITH A LIPO CHARGER, ALL THE LEDS WERE GREEN THIS MORNING. YOUR VIDEO CONFIRM THAT I DID EVERYTHING IN THE RIGHT WAY. NEXT STEP A 4S, 5S AND 6S LI ION BATTERY PACK. THANKS FOR THE VIDEO!
Do not forget to balance your 18650 batteries before putting them in a pack, this way the voltage is almost the same and will be charged faster. Great video, i have been doing it like this for many years now😀🇳🇱
Nice guide there :) Good that you also added in balance charging connectors. Only things I would say is that: a) a soldering iron can be used if you don't have a spot welder (like me) b) for best lifespan, you need to capacity check each cell (on a balance charger like the one in the video) to see what its capacity is like - as laptop batteries will vary significantly, and the pack will be limited by the cell with the worst capacity.
Thanks for the great video, can you please explain how to wire for balance charging through balance charger if 4 cells were to be used as a 7.4v pack in order to increase capacity, similarly as it is in the actual laptop battery pack, ie. 3 pairs of cells for 10.8 / 11.1v? Or would the two parallel cells just be counted as one (with double capacity) by the balance charger?
Much safer than a Li-Po for sure. And 18650s have shutoff vents that not only release the pressure, but also disconnect the battery from the circuit. Overload, overheating or a short circuit will build up pressure until the safety vent opens. At least in some models. Anyway, as long as you don't discharge them at over 2C, you should be fine.
As others are mentioning, Use a BMS to stop over discharge which WILL kill your batteries. Also, do capacity tests on the cells, match cells as closely as possible by capacity and ALWAYS run a MONITORED charge/discharge cycle on each cell looking for temperature, throw out the heaters.
Please show us how to build your home-made spot welding machine. The ones on eBay cost from US 120 to US 250... Too expensive... The one you made seems to work OK. It is doing the job.
Nice video well done. But those are not Lipo batteries but Li-Ion. So the charger should be set to Li-Ion as otherwise you will be overcharging them to 4.2V per cell instead of 4.1V. Not that they will explode but still not their correct and normal full charge voltage. Keep up the good work!
Very Nice and Helpful Video. Allthough i have some recommendations. 1) Dont use a Lipo Charger for Lion Batterys. 2) Use thicker wire for the main Leads because the bigger Packs can output higher current and if you pump higher current through those thin cables, they could cause a fire, so please be careful. Have a nice day! ;)
Hi..You video helped me a lot in knowing about creating and battery charging circuits for rechargeable drill. Could you direct me to where I could buy this white cable to control the battery charging circuit. I tried to aliekpressu but I could not. Thank you in advance if you are taking the time to reply.
hello friend your videos are excellent could you do me a favor to give me the configuration for the wiring balancer I would appreciate it. a question this pack of batteries can be used in drones I would appreciate your help and advice I want to make a pack to control my syma X8C thousand thanks success in your other projects
hi. I'm thinking on doing some battery packs myself. Do I need those protection boards (BMS) if I use similar charger like you have? (imax b6) (where I will use them, i will have some electronics to check each cell voltage - altough I won't have the ability to detect short circuit - overcurrent protection?) Thanks!
i like the idea, and the tool that you use to solder the tape with the battery how did you made it ? min 3:12 it seems like you used an ATX power supply to use it?
yup newbies be careful with stripped battery covers and soldering them once shorted the tin gets extremely hot in a millisecond!!! burned fingers to show for it :)
Did you create a welding machine out of a PC PSU? If so, how? And if the laptop is broken, the battery has had most if its time. Why use the cells? Or can you (in this process) rejuvenate the cells by charging /balancing with a proper charger?
I'm making a prototype that uses 2S 7.4v 3400mAh battery pack. Do you know any good changing IC modules (PCB) that I can use to charge the pack via USB. I don't want to integrate the charging circuit into my existing design, since they look like they are pretty cheap anyway. I'm looking for something that I can just punch a hole in my enclosure for the USB and it will just work. Any advice?
Hi. Thank you for sharing this video. Question. I would like to do the same thing like you and make some (2S) from my old laptop 18650 batteries for my RC car. Can I charge the 2S pack with the same charger from my RC car after I make the 2S used battery pack? The charger that came with the RC car only has the balance 3 pin connector to it. That's how I charge my original battery that came with the RC car. Thank you. Cheer! :)
Thanks! I actually needed one of these vids to make a rechargeable battery for a old phone (samsung alpha, the battery would not charge but would heat up(not to hot just warm))
mate all I need to know is how to make a easy welder for the tabs, may be based on capacitors , MOSFET .... a small unit cos it's not something we need everyone's day. my soldering is not that bad, so far all my battery packs have been working well. I'm always scared while using solder iron on 18650's
excellent video friend, I'm about to build a rechargeable battery like the 3s, but I do not have a Pro charger like yours, would it be a problem if I charge it with a 12v and 1A source ???
yes it would, if you like your house on fire, go right on ahead. Do some research, LiOn batteries have CRITICAL cut off voltages, also they require a CC charge initially, followed by a CV charge after 80 % to top them off. (constant current, constant voltage)
in this way without using a protection board i think you can damage the batteries when the charge became to low, but i need another information, is it possible to charge for example a 4s battery pack with specific protection board without the balance cable and with specific charger? i mean if exist a board with automatic balancing!
Even if you don't use use protection board, but Balance charge the batteries as shown in the video, no batteries will be damaged.
Před 6 lety
Hola buenas tardes, veo que se ha hecho una maquina de soldar por puntos ¿Tiene algún vídeo de como hacerla?¿se ha inspirado en algún otro tutorial/manual?¿Cual? Y por otro lado ¿Que cinta de níquel usa?¿De que calibre y grosor es? Muchas gracias y un saludo.
Awesome Project... Question to anyone out there... in YT Land... What are these battery packs used for, I dont know what salvaging them and making packs would be useful for... singles yeh, but packs... I am kinda curious on what to do with em. And yes I know i saw to the end with the Motor... but just for motors? Really?
this battery type is the base for every electric home-based renewable thing out there Tesla use them in their cars, in their powerwall product etc let your imagination fly
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
GREAT VIDEO!
YESTERDAY I FINISHED A 3S LI ION BATTERY PACK.
BUT I WASN T SURE I DID WELL.
AFTER A NIGHT OF CHARGING WITH A LIPO CHARGER, ALL THE LEDS WERE GREEN THIS MORNING.
YOUR VIDEO CONFIRM THAT I DID EVERYTHING IN THE RIGHT WAY.
NEXT STEP A 4S, 5S AND 6S LI ION BATTERY PACK.
THANKS FOR THE VIDEO!
Do not forget to balance your 18650 batteries before putting them in a pack, this way the voltage is almost the same and will be charged faster. Great video, i have been doing it like this for many years now😀🇳🇱
Nice guide there :) Good that you also added in balance charging connectors.
Only things I would say is that:
a) a soldering iron can be used if you don't have a spot welder (like me)
b) for best lifespan, you need to capacity check each cell (on a balance charger like the one in the video) to see what its capacity is like - as laptop batteries will vary significantly, and the pack will be limited by the cell with the worst capacity.
Thanks for the soldering iron idea:)
Thank you very much for your valuable teachings, my friend. I send you many greetings from South America ... Lima - Peru.
This was very helpful to watch, thank you for making this video. I will be making a few 4S batteries myself using this tutorial. Thanks!
Best welding machine I've seen in 30 years of industrial engineering :D
was it made from an old PC power supply?
ERD Epoch He used a casing from a PC power supply. Inside is a microwave transformer.
Ahh ok..
coolest dang welder I ever saw! You should make a video on it!
he already did a video! :) ... search in his previous videos...
Nice ..... Creative work...
awesome, just finished a 3s pack now, minus the spot welder. as long as your quick, a normal soldering iron works perfect.
Kyle Fpv how does the battery do in flight?
@@footduck6681 not do well
Thanks for the tip
Thanks for the great video, can you please explain how to wire for balance charging through balance charger if 4 cells were to be used as a 7.4v pack in order to increase capacity, similarly as it is in the actual laptop battery pack, ie. 3 pairs of cells for 10.8 / 11.1v? Or would the two parallel cells just be counted as one (with double capacity) by the balance charger?
Holy 18650s! Great idea but damn be careful. These babies are not happy when shorted.
Much safer than a Li-Po for sure. And 18650s have shutoff vents that not only release the pressure, but also disconnect the battery from the circuit. Overload, overheating or a short circuit will build up pressure until the safety vent opens. At least in some models. Anyway, as long as you don't discharge them at over 2C, you should be fine.
As others are mentioning, Use a BMS to stop over discharge which WILL kill your batteries. Also, do capacity tests on the cells, match cells as closely as possible by capacity and ALWAYS run a MONITORED charge/discharge cycle on each cell looking for temperature, throw out the heaters.
Please show us how to build your home-made spot welding machine. The ones on eBay cost from US 120 to US 250... Too expensive... The one you made seems to work OK. It is doing the job.
To you and the people who don't know how to watch a video, Here's your clue:
@ 2:24
Thank you very much, nice video. I had trouble wiring my batteries and you explained it very well. (had the neg wrong). Thanks again!!
All respect for your beautiful business
Excellent job, very well presented, cheers....
thanks you are great i build more two batteries for my wingsland M5 drone
Very nice and helpful video ! Thank you very much.🙏🏽
The activities I have seen here is quite educative I can confess
Really fantastic your demonstration ... very cool !! Thank you so much!
great video thanks! - would love to build that mini-welder! Do you have a video regarding this?
To you and the people who don't know how to watch a video, Here's your clue:
@ 2:24
Hi .
I love your videos .
Thank You for your time and effort to make them !!!
Veer g i love you...you have saved my money....Love you
Great video. How would you connect the balance leads on a 3S 5P
This guy is a genius, but that's doesn't mean all viewers are too. We can't tell which wires go where when soldering small set
This is like a new world to me, Thank you!!!!!!!!!!!!!!!!!!!!!!! ❤
No problem
😂
Great tutorial on wiring batteries for balance chargers, but would love to see one of your spot welder, that interests me the most.
czcams.com/video/tPuKu5J-_64/video.html
Great video man, It is posible to charge them with a solar panel? Link of the charger balance? Thanks for your kelp.
Super good.. Edukasi.. Sir.
Have you a video how you build your welding equipment with this power supply to make point welding on aluminium?
Neat idea but I don't think they will perform anything like a LiPo. They don't have the discharge rate for high current draw.
Nice video well done. But those are not Lipo batteries but Li-Ion. So the charger should be set to Li-Ion as otherwise you will be overcharging them to 4.2V per cell instead of 4.1V. Not that they will explode but still not their correct and normal full charge voltage. Keep up the good work!
Always enjoy yr vid.
Looks like there is no low voltage protection in these batt..
how to prevent lithium Ion voltage fall below 3.7v batt cell?
saludos y gracias por gran aporte, y aqui me tienes ahora desvaratando todas las pilas de laptop que encuentro :)
The adhesive tape that they use as it is called, I really liked to use it in several projects. Thanks in advance.
tpe cis tape, you can use all tape what you have, but smart good men make good and use heat shrink tube cover battery.
très bien c'est excellent
I like your project.👌
which camera do you use?
Very Nice and Helpful Video.
Allthough i have some recommendations.
1) Dont use a Lipo Charger for Lion Batterys.
2) Use thicker wire for the main Leads because the bigger Packs can output higher current and if you pump higher current through those thin cables, they could cause a fire, so please be careful.
Have a nice day! ;)
this is a lipo, liion, liFe, nicd and pb charger so he can use it :)
Sure.. but he used the Lipo Setting.
una pregunta como hiciste ese como acelerador para los moteres yo quiero hacer uno porfa
brandon pincay busca, creo que se llama dimmer
Master, how can I do 2s bms in parallel connection, please reply, thank you
Hi..You video helped me a lot in knowing about creating and battery charging circuits for rechargeable drill. Could you direct me to where I could buy this white cable to control the battery charging circuit. I tried to aliekpressu but I could not. Thank you in advance if you are taking the time to reply.
how to increase battery capacity without increasing total voltage?
what is the name of the adhesive tape you use?
Hello, how did you build the soldering machine in points?
super bro
hello friend your videos are excellent could you do me a favor to give me the configuration for the wiring balancer I would appreciate it.
a question this pack of batteries can be used in drones I would appreciate your help and advice I want to make a pack to control my syma X8C thousand thanks success in your other projects
hi.
I'm thinking on doing some battery packs myself.
Do I need those protection boards (BMS) if I use similar charger like you have? (imax b6)
(where I will use them, i will have some electronics to check each cell voltage - altough I won't have the ability to detect short circuit - overcurrent protection?)
Thanks!
Great instructions
Great tutorial. Thank you.
i like the idea, and the tool that you use to solder the tape with the battery how did you made it ? min 3:12
it seems like you used an ATX power supply to use it?
Can we just put a connecter with two wires for 2s battery or 3 wire connected shall be put after two wire one
The three pin wires for a2s battery are for balance charging the batteries, so that the batteries don't get damaged while charging.
Thanks for the video. Even though there was no verbal explanation, every thing was understood
Is it possible for you to provide the link, from where you bought the battery tapes? Thanks.
yup newbies be careful with stripped battery covers and soldering them once shorted the tin gets extremely hot in a millisecond!!! burned fingers to show for it :)
May i also ask for the ratings of the 2s battery you made thanks!
Very Nice
any alternatives for nickel strip and insulater ring. because I have all the things except both of them please help?
Would these equal 20C output?
شكرا جزيلا
فيديو رائع ومفيد
Thanks too mutch
Are those cells protected or unprotected? Is there the possibility that the consumer discharges them too far so that they will be damaged?
i think so without protection board
These are lipo. Battery also right?? What do you call the connectors by the way..? Thanks
Did you create a welding machine out of a PC PSU? If so, how?
And if the laptop is broken, the battery has had most if its time. Why use the cells? Or can you (in this process) rejuvenate the cells by charging /balancing with a proper charger?
czcams.com/video/tPuKu5J-_64/video.html
Please provide the link where to buy those long balance charging cables and tapes. Thank you.
+Creative Channel -- should we need the pcb protection on this pack when it's connected to one of device, as like : rc drone or aircaft..? thnkss..
Please make a air fryer from nichrome wire please sir
Is it possible to say the name and model of the adhesive tape that was shown at the beginning of the clip?
For 18650 bateries like those ones you dont need that much proteccion, you can charge one with 4.2 v, 8 v with 2s and so on
what is the name of that machine which you are usein for shouldering the metal plates on battery
well done creative channel. I love ur uploaded video. ur videos r excellent
3sel battery qadcopter dron me laga saktey sir
I'm making a prototype that uses 2S 7.4v 3400mAh battery pack. Do you know any good changing IC modules (PCB) that I can use to charge the pack via USB. I don't want to integrate the charging circuit into my existing design, since they look like they are pretty cheap anyway. I'm looking for something that I can just punch a hole in my enclosure for the USB and it will just work. Any advice?
Great use for the spot welder! Exactly what I thought you were going to use it for :)
4S Battery Diagram is great.
I see a very simple pretty good spot welder, that you have made.Would you be so kind enough to give me the link,how this is made?Thanks.
czcams.com/video/tPuKu5J-_64/video.html
eres de mucha ayuda. muchas gracias . no lo tenia claro pero ahora si.
Muchas gracias no dices nada pero lo entendí perfectamente saludos
Hi. Thank you for sharing this video. Question. I would like to do the same thing like you and make some (2S) from my old laptop 18650 batteries for my RC car. Can I charge the 2S pack with the same charger from my RC car after I make the 2S used battery pack? The charger that came with the RC car only has the balance 3 pin connector to it. That's how I charge my original battery that came with the RC car. Thank you. Cheer! :)
Dxccfgfffffffddfffxdddcffdffffffffffcccvvgvgg
I can use in drones. The battery ?
Same question
excellent video thanks!!!!!!! :D
Thanks! I actually needed one of these vids to make a rechargeable battery for a old phone (samsung alpha, the battery would not charge but would heat up(not to hot just warm))
mate all I need to know is how to make a easy welder for the tabs, may be based on capacitors , MOSFET .... a small unit cos it's not something we need everyone's day. my soldering is not that bad, so far all my battery packs have been working well. I'm always scared while using solder iron on 18650's
Very Very Very Very Very nice
can you tell me whats the white wire call? and what are the pink and white wire call? thank you
Any information about the capacity mAh
Essas bateria são iguais a d lipo, não pode deixar descarregar toda?
Very nice work!
What did you use to increase and reduce speed of motor it was connected to that 3 wires from the esc
excellent video friend, I'm about to build a rechargeable battery like the 3s, but I do not have a Pro charger like yours, would it be a problem if I charge it with a 12v and 1A source ???
yes it would, if you like your house on fire, go right on ahead.
Do some research, LiOn batteries have CRITICAL cut off voltages, also they require a CC charge initially, followed by a CV charge after 80 % to top them off. (constant current, constant voltage)
I was interested how you did this spot welding machine using the pc source, you would have the project
Por cual de todos los cables se puede cargar.
Can we use power bank battery insted of laptop
Yes.
Nice work but those wires look like they're going to melt under high current (basically anything RC)
in this way without using a protection board i think you can damage the batteries when the charge became to low, but i need another information, is it possible to charge for example a 4s battery pack with specific protection board without the balance cable and with specific charger? i mean if exist a board with automatic balancing!
Even if you don't use use protection board, but Balance charge the batteries as shown in the video, no batteries will be damaged.
Hola buenas tardes, veo que se ha hecho una maquina de soldar por puntos ¿Tiene algún vídeo de como hacerla?¿se ha inspirado en algún otro tutorial/manual?¿Cual? Y por otro lado ¿Que cinta de níquel usa?¿De que calibre y grosor es?
Muchas gracias y un saludo.
ve la lista de videos que tiene, ahi te explica como hacer el soldador de puntos, saludos
Does it matter if the capacity is different in each battery ? I have batteries from 2.4ah 18v battery and 5ah 18v battery can I mix them up ?
Awesome Project...
Question to anyone out there... in YT Land...
What are these battery packs used for, I dont know what salvaging them and making packs would be useful for... singles yeh, but packs... I am kinda curious on what to do with em.
And yes I know i saw to the end with the Motor... but just for motors? Really?
power banks, rc batteries or general portable equipment power supplies
Ahh thank you.... much appreciated for the answer.
this battery type is the base for every electric home-based renewable thing out there Tesla use them in their cars, in their powerwall product etc let your imagination fly
As always like from Russia
Explain neatly
i love diagram :D
Bang cgit komen baru tau saya
Waw ada bang cgit
I also
Mau bikin baterai juga? Pantes di konten dulu ada baterai gitu banyak😂
Wawww
Kıymetli üstadım yardımına ihtiyacım var yeriniz nerde bilmiyorum ben İstanbul Anadolu yakakasındayım