Sorry i''m newbie, when i input the workflow, i show these problem, how i can fix it: When loading the graph, the following node types were not found: ReActorLoadFaceModel ReActorOptions ImageRGBA2RGB ReActorSaveFaceModel ReActorFaceSwapOpt ReActorMaskHelper ReActorRestoreFace Nodes that have failed to load will show as red on the graph.
@congsonlam5998 Hello, the group with the Reactor nodes is relatively difficult to install. I have published an extra video about this: czcams.com/video/rR5M7ZjH9HA/video.html The installation process should be described in detail there... And also a possibility how you can do everything else except faceswap with the workflow by simply deleting the group without this “complicated” installation method.
Hello, there are more videos in the playlist czcams.com/play/PLOlk3DTLbLzQQzMTytsq8oEjdeRhDjI3j.html . In the installation video you will also find more information about the manager. This is the node that everyone should use if they want to work with custom nodes: Here is the link: github.com/ltdrdata/ComfyUI-Manager If you want to save directly under Comfy using the small arrow, you need these nodes: github.com/pythongosssss/ComfyUI-Custom-Scripts Normally, after installing the manager, you can automatically install all nodes, with a few exceptions that are described in the videos. How to do this is also explained in the installation video: czcams.com/video/-fMgUafa3eI/video.html
Hello, after i input the "diffusion_pytorch_model_promax.safetensors" as controlnet in this Workflow i got the following Error: " Error occurred when executing SDXL Power Prompt - Simple / Negative (rgthree): 'NoneType' object has no attribute 'float' [...] AttributeError: 'NoneType' object has no attribute 'float' " what could I doing wrong?
@caphalor1299 The error shouldn't have anything to do with the control net model, I tested the new promax model, it works with the workflow without any problems. Your error message suggests that there is something wrong in the conditioning group (the one in front of the control nets) in one of the 2 red nodes at the very bottom (SDXLneg or SDXL Ref neg), or that something isn't getting there, probably opt clip_wight or opt_clip_hight. Have you entered a value of 1; 2 or 4 in the gray Node Clip Scale in the Start Settings group?
@@murphylanga First of all: thank you very much for the quick response and even more important: thank you for sharing this gigantic workflow! I'll try out your tips, but it'll take a while 😉
Manager from Lt Dr. Data, see my comment in your last question. Press Manager, then Custom Nodes Manager. There, under search, enter art or venture. Select comfyui-art-venture and press install. Then restart and that's it. Or manually at: github.com/sipherxyz/comfyui-art-venture
@@murphylanga thx! I have no idea why when i search for it i get no results in the manager, but i just downloaded your workflow and install it with the missing nodes :)
Just in time for the weekend! Thank you kind sir! 👍
You're welcome, enjoy.
Nice work Murphy. I hadn't had chance to try this new model, and save some space. Now I don't need to 😊
@Dreddoom Hello, thank you! I will probably clean out some of my Controlnet models too. Have fun trying them out
Keep up the good work, you're doing a great job.
Sorry i''m newbie, when i input the workflow, i show these problem, how i can fix it:
When loading the graph, the following node types were not found:
ReActorLoadFaceModel
ReActorOptions
ImageRGBA2RGB
ReActorSaveFaceModel
ReActorFaceSwapOpt
ReActorMaskHelper
ReActorRestoreFace
Nodes that have failed to load will show as red on the graph.
@congsonlam5998
Hello, the group with the Reactor nodes is relatively difficult to install.
I have published an extra video about this: czcams.com/video/rR5M7ZjH9HA/video.html
The installation process should be described in detail there... And also a possibility how you can do everything else except faceswap with the workflow by simply deleting the group without this “complicated” installation method.
@@murphylanga Thank you alot ❤️❤️❤️
Hello, whats the name of the node for saving the workflow? I couldnt understand from the video
Hello, there are more videos in the playlist
czcams.com/play/PLOlk3DTLbLzQQzMTytsq8oEjdeRhDjI3j.html
. In the installation video you will also find more information about the manager. This is the node that everyone should use if they want to work with custom nodes: Here is the link: github.com/ltdrdata/ComfyUI-Manager
If you want to save directly under Comfy using the small arrow, you need these nodes: github.com/pythongosssss/ComfyUI-Custom-Scripts
Normally, after installing the manager, you can automatically install all nodes, with a few exceptions that are described in the videos. How to do this is also explained in the installation video: czcams.com/video/-fMgUafa3eI/video.html
@@murphylanga thx!
Hello, after i input the "diffusion_pytorch_model_promax.safetensors" as controlnet in this Workflow i got the following Error:
" Error occurred when executing SDXL Power Prompt - Simple / Negative (rgthree):
'NoneType' object has no attribute 'float' [...]
AttributeError: 'NoneType' object has no attribute 'float' "
what could I doing wrong?
@caphalor1299
The error shouldn't have anything to do with the control net model, I tested the new promax model, it works with the workflow without any problems. Your error message suggests that there is something wrong in the conditioning group (the one in front of the control nets) in one of the 2 red nodes at the very bottom (SDXLneg or SDXL Ref neg), or that something isn't getting there, probably opt clip_wight or opt_clip_hight. Have you entered a value of 1; 2 or 4 in the gray Node Clip Scale in the Start Settings group?
Just try reloading the original workflow and starting it once without Controlnet and then load your Controlnet model there and try again.
@@murphylanga First of all: thank you very much for the quick response and even more important: thank you for sharing this gigantic workflow! I'll try out your tips, but it'll take a while 😉
Also how do we install the artventure node? Cant find it.
Manager from Lt Dr. Data, see my comment in your last question. Press Manager, then Custom Nodes Manager. There, under search, enter art or venture.
Select comfyui-art-venture and press install. Then restart and that's it. Or manually at: github.com/sipherxyz/comfyui-art-venture
@@murphylanga thx! I have no idea why when i search for it i get no results in the manager, but i just downloaded your workflow and install it with the missing nodes :)
Where can i find the workflow you're using??
The download link is under the video description
CivitAI and OpenArt